Canon i-SENSYS MF4320d- Manuals

Copyright Copyright CANON INC. 2017 No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, with...

Trademarks Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Mac, macOS, OS X, and Macintosh are trademarks of Apple Inc. Other product and company names herein may be the trademarks of their respective o...

Before Use Before Use .............................................................................................................................................................. 9 Before Use 8

Installing the Driver Installing the Driver ....................................................................................................................................... 11 Flow of Preparations for Scanning ......................................................................................

Flow of Preparations for Scanning Before using the driver and scanning, there are preparations that need to be done beforehand. This driver is a macOS scanner driver for Canon devices. When it is installed, utility software for scanning data to a computer called MF Scan Utility and MF Toolbox is als...

Pre-installation Check This describes the items to be checked beforehand in order to install the driver correctly. System Requirements(P. 14) About the Readme File(P. 15) Installing the Driver 13

System Requirements Use one of the following system environments with this driver. Operating Systems Mac OS X 10.7.5 or later Hardware A computer guaranteed to operate using the above operating system. Installing the Driver 14

About the Readme File The following content is contained in the Readme file. ● Limitations, restrictions, and cautions when installing or using the driver ● Utility software that supports the device (MF Scan Utility or MF Toolbox) Refer to README-ENG.html in the accompanying CD-ROM or the downloaded...

Installing the Driver This section explains the procedure for installing the driver to the operating system. Install the driver and register the scanner to use. Prerequisites Confirm that the following conditions are satisfied. Complete the preparation operations. ● Obtain the driver installer. ● Sy...

Registering a Scanner You can register the scanner you are going to use. The MF Scan Utility or MF Toolbox is used to register a scanner. To find out which utility software corresponds to the device you are using, refer to the Readme file. Registering an MF Scan Utility Compatible Scanner(P. 18) Reg...

Registering an MF Scan Utility Compatible Scanner You can register a scanner to the operating system using the MF Scan Utility. Here, the procedures for network connection and USB connection will be explained. Prerequisites Confirm that the following conditions are satisfied. Complete the preparatio...

5 Start the MF Scan Utility. 6 Check that the registered scanner name is displayed in the main dialog box of [CanonMF Scan Utility]. If the scanner name is not displayed, reinstall the driver. When registering a scanner connected by USB 1 Turn the scanner on → connect the scanner and the computer by...

Registering an MF Toolbox Compatible Scanner You can register a scanner to the operating system using the MF Toolbox. Here, the procedures for network connection and USB connection will be explained. Prerequisites Confirm that the following conditions are satisfied. Complete the preparation operatio...

Uninstalling a Driver This explains the procedure for uninstalling a driver that is no longer needed. Prerequisites Confirm that the following conditions are satisfied. Complete the preparation operations. ● When connected by USB, removal of the USB cable connecting the device and the computer ● Con...

Scanning Using the Driver Scanning Using the Driver .......................................................................................................................... 26 Scanning from the MF Scan Utility ...........................................................................................

Scanning from the MF Scan Utility This explains the basic procedure for scanning using the MF Scan Utility. 1 Set the original in the device. 2 Set the device to online. If [System Management Settings] > [Auto Online for Remote Scan] is disabled, select [Scan] > [Remote Scanner] from the scan ...

Scanning from the MF Toolbox This explains the basic procedure for scanning using the MF Toolbox. 1 Set the original in the device. 2 Set the device to online. If [System Management Settings] > [Auto Online for Remote Scan] is disabled, select [Scan] > [Remote Scanner] from the scan functions ...

Scanning from an Application This explains the basic procedure for scanning using ScanGear MF from an application such as image editing software. 1 Set the original in the device. 2 Set the device to online. If [System Management Settings] > [Auto Online for Remote Scan] is disabled, select [Scan...

About Guidelines for Resolution Settings When scanning, if you set a high resolution (increase the numerical value), the image will be extremely detailed, and if you set a low resolution (decrease the numerical value), the image will be rough. Guidelines for resolutions to set and the purpose of a s...

Settings List Settings List ......................................................................................................................................................... 34 MF Scan Utility Settings .............................................................................................

MF Scan Utility Settings This section explains the main dialog box that is displayed first when the MF Scan Utility is started and the [Settings] dialog box for setting details when scanning. Main Dialog You can select the main scanning functions that can be specified with the MF Scan Utility. [Prod...

When scanning, sets the position to place the original (the platen glass or feeder), the color mode, original size, etc. [Scanning Method] When scanning, sets the position to place the original (the platen glass or feeder).If you select [Auto Mode], the original will be scanned from the feeder if it...

Thumbnail images You can manipulate the image, change the save order, rotate the image, etc. ● To change the save order: drag and drop the images ● To rotate an image: select the image → click [ ]/[ ]. Items in the [Save Settings] dialog box other than the thumbnail images are the same as the items ...

MF Toolbox Settings This section explains the main dialog box displayed first when MF Toolbox is started, the scan dialog box for setting details when scanning, and the [Preferences] dialog box for setting content that can be customized with MF Toolbox. Main Dialog You can select a scanning method a...

[Set Upper Limit of File Size] Sets the maximum value for the file size of scanned images in [Setting Value] [Expected File Size] Displays the predicted size of the image file when scanning with the set content. If the predicted size exceeds the numerical value of [Setting Value] set in [Set Upper L...

[Original Placement] When scanning, sets the position to place the original (the platen glass or feeder).If you select [Auto Mode], the original will be scanned from the feeder if it is set in the feeder. If the original is not set in the feeder, the device will scan from the platen. [Scan Size] Set...

ScanGear MF Settings In ScanGear MF, you can set and adjust the intended use of the scanned image etc. When scanning, you can configure settings in either the [Simple Mode] panel or the [Advanced Mode] panel. Toolbar In the preview, you can specify and manipulate the scan area (cropping frame). If y...

Troubleshooting Troubleshooting ............................................................................................................................................... 52 Cannot Scan ................................................................................................................

Cannot Scan If scanning does not start, the computer does not recognize the scanner, or you cannot perform scanning, it could be caused by one of the following. Follow the instructions described in each "Remedy." Cause 1. The device settings are not configured correctly Remedy Check the conn...

The Scanned Image is Dirty If the scanning section of the device is dirty or if the original is unclear, it may be caused by one of the following. Follow the instructions described in each "Remedy." Cause 1. The platen glass or platen cover is dirty Remedy Clean the platen glass, platen cove...