Canon i 860- Manuals

Drill motor and a very small drill a bit larger than the diameter of the fill needle. Hot glue gun and glue (of course) Bulk ink refilling kit (from Atlascopy.com--of course) Ink (Same as above) Newspapers (in case you make a mess first time) And that’s about it! THE INK TANKS These aren’t cartridge...

and the other empty. There’s a transit space between the two spaces for the ink to move from the empty space (a reservoir) to the foam filled space. The computer uses infra red technology to read the tanks and can report the amount of ink remaining to you using the software “setup utility). Another ...

drilled. In future fills it’ll be necessary to clear the hole each time over the reservoir in order for the needle to enter. Generally that will mean using the drill again as the glue will go down into the hole a bit.If you don’t get a good seal with the glue over the fill hole, ink will immediately...