Canon DR-5080C EN- Manuals

S T E P 4 If you are scanning a stack of documents with the DR-5020/5080C set to Remote or Semi-Auto, first prepare the papers so that the stack’s edges are even. Then load the stack onto the document tray with the documents face up, their top edge inserted first into the scanner. (If you are using ...

5 1 S T E P 4 Place one page of the stack on the document tray, and set the paper guides to match the width of the document. ▲ S T E P 5 Use the application software to instruct the scanner to start scanning. At this point, the Start key on the operation panel will change colors from red to green. T...

FUNCTION KEYS Positioned at the top of the scanner’s operation panel, the four F u n c t i o n K e y s a l l o w v a r i o u s s e t t i n g s t o b e r e g i s t e r e d ( v i a t h e application software) for one-touch recall. Default settings for the four keys are: 1) manual thickness adjustment;...

9 3 S T E P 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper (eject) tray. Close the document eject tray guide if it is open. Paper may be jammed if scanning stops midway or “PXX” appears on the counter display. Please follow the procedure...

10 3 Error codes appear on the operation panel’s counter display when a scanner malfunction occurs. A complete list of error codes and solutions to other types of scanner trouble can be found in Chapter 4 of the Instructions manual (“Troubleshooting”). T R O U B L E S H O O T I N G E R R O R C O D E...