Canon DR-2080C- Manuals

4 Table of Contents Table of Contents Before Using the Unit ......................................................................................... 5 To Ensure Safe Operation ...................................................................................... 5 Installation Location ...............

Before Using the Unit 5 Before Using the Unit To Ensure Safe Operation In order to ensure safe operation, be certain to read the cautions describedbelow. Installation Location The performance of this unit is affected by the environment in which it isinstalled. Make sure that the location where the u...

6 Before Using the Unit ● Avoid unstable surfaces and locations subject to vibration. ● Avoid locations that are subject to rapid temperature changes.Condensation inside of the unit can result in inferior image quality. Usethis unit under the following environmental conditions: Temperature: 10 degre...

Before Using the Unit 7 Notes on Normal Handling WARNINGTo avoid fire and electric shock, always observe the followingwarnings when using this unit. ■ Do not place flammable chemicals, such as alcohol or paint thinner, nearthe unit. ■ Do not cut, damage, or modify the power cord. Do not place heavy ...

8 Before Using the Unit CAUTION ■ Do not set the unit up on a wobbly platform, a sloped surface, or any othertype of unstable location. Do not set up the unit in a location that is subjectto vibration. The unit could injure someone if it falls or tips over. ■ Do not block the ventilation openings. D...

Before Using the Unit 9 Features of the DR-2080C The main features of the DR-2080C scanner are listed below. ■ Compact size The scanner is extremely compact, 11.7W x 8.2H x 3.9D in. (298W x 209Hx 99D mm). Further, because the DR-2080C is an upright scanner, it doesnot take up a lot of space. ■ SCSI/...

10 Before Using the Unit ■ “Skip blank page” function The scanner is equipped with a “skip blank page” function that allows it toscan a document regardless of whether every page is double-sided orsingle-sided. (This function is implemented by the ISIS/TWAIN driver.) ■ Pre-scan function The scanner i...

Before Using the Unit 11 Checking the Packing List The contents of the carton in which this unit is shipped are described below. Ifanything is missing or damaged, contact your dealer or service representative. q Feed roller w Document stop e Setup disc (CD-ROM) r Startup manual (this manual) t Adjus...

12 Before Using the Unit Removing Protective Tape and Protective Sheet Before using the scanner, remove the protective tape and protective sheet thatprotect the unit from damage during shipment. 1. Remove the protective tape that is attached to the exterior of the unit. 2. Remove the protective shee...

Before Using the Unit 13 4. While squeezing the OPEN release ( ➀ ), open the front unit towards you ( ➁ ). 5. Remove the protective tape pasted on the inside of the scanner.

14 Before Using the Unit Names and Functions of Parts This section explains the name and function of each part. Familiarize yourselfwith the parts before connecting the scanner. ■ Front and right views ■ Front view (with top cover and paper feed cover open) Document feed openingSet the document that...

Before Using the Unit 15 ■ Rear and left views CAUTIONDo not block the ventilation openings. Doing so could cause theunit to overheat, creating a risk of fire. ■ Symbols Used in This Guide Ventilationopenings Power connectorConnects to the ACadapter provided withthis unit. SCSI connectorConnects to ...

16 Installing the Scanner Installing the Scanner Before Setting Up the Scanner Extending the stand Extend the stand located at the rear of the unit to prevent it from toppling. Notice Make sure that you use the unit with the stand extended. If you do not use thestand, the unit may topple and be dama...

18 Installing the Scanner 6. Slide the roller lock lever to the right, and set it into the hollow to the left ofthe roller. 7. Lower the lever to fasten the feed roller spindle. 8. Close the roller cover. Make sure that the cover clicks into place and isreturned to its original position.

Installing the Scanner 19 9. Gently press the upper left and right edges of the front unit. Make sure that thecover clicks into place and is returned to its original position. 10. Close the paper feed tray. 11. Close the top cover.

20 Installing the Scanner Installation Requirements In order to use the DR-2080C, your computer must satisfy the followingsystem requirements: ● IBM PC/AT-compatible that satisfies the following specifications:• Intel Celeron 733MHz or faster• Main memory: 256 MB or more (recommended)• Hard disc spa...

22 Installing the Scanner Installation Procedure The procedure for installing the unit is outlined below. (For a detailed outlineof this procedure, see “Connecting the Scanner to Your PC” at the end of thissection.) 1. Check the interface board in your computer. ( → page 23 “Interface Board”) ↓ 2. C...

Installing the Scanner 23 Interface Board When connecting the scanner via USB, verify that the USB 2.0 interfaceboard you are using is one recommended for use with the scanner. Therecommended USB 2.0 interface boards are as follows: SCSI Boards When connecting the scanner via SCSI, verify that the S...

24 Installing the Scanner USB 2.0 Interface Board When connecting the scanner via USB, verify that the USB 2.0 interfaceboard you are using is one recommended for use with the scanner. Therecommended USB 2.0 interface boards are as follows: Recommended USB2.0 Interface boards Manufacturer : Adaptec ...

Installing the Scanner 25 Connecting the Scanner to Your PC There are two ways of connecting the scanner to your computer, via SCSI orvia USB. Choose either way suitable for the environment in which you areusing the PC. Notice ● When the application is running, do not turn the scanner off nor unplug...

26 Installing the Scanner Notice ● Make sure that the scanner and your PC are both turned off whenconnecting the scanner to the PC. ● Since the provided SCSI board uses a D-sub 25-pin connector, take care toconnect the SCSI cable to the SCSI board connector, and not to the D-sub25-pin connector of t...

Installing the Scanner 27 Connecting via USB USB interface connection• Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0-compatible cable. • When using a USB extension board that supports Hi- Speed USB 2.0, be sure to choose one verified for use with the scanner.( → page 24...

28 Installing the Scanner Connecting the Power Cord 1. Connect the power cord provided with the unit to the AC adapter. Notice ● Only use the power cord and AC adapter provided with this unit. ● Always be sure to turn the power switch off before plugging in the powercord. 2. Connect the AC adapter c...

Installing the Scanner 29 Turning the Power On/Off Follow the procedures described below when turning the power on and off. Turning the Power On 1. Turn on the scanner. The power switch is located on the lower right rear corner of the scanner. To turn the scanner on, slide the power switch towards t...

30 Installing the Scanner 3. In the “Copy manufacturer’s files from” box, type “D:\INF\Win95” (where “D” is the name of your CD-ROM drive), and then click the OK button. ● If you are using Windows 95 (OSR2), the “Update Device Driver Wizard”dialog box appears. 1. Click the Next button.2. Click Other...

Installing the Scanner 31 4. Load the setup disc into the computer’s CD-ROM drive.5. Type “D:\INF” (where “D” is the drive letter assigned to your CD-ROM drive) and then click the OK button. 6. In the “Driver Files Search Results” screen, click the Next button.7. If the message “Digital Signature No...

32 Installing the Scanner Turning the Power Off CAUTIONIf the unit will not be used for an extended period of time, unplugthe power cord for safety’s sake. 1. Turn off the PC. 2. Turn off the scanner. The power switch is located on the lower right rear corner of the scanner. To turn the scanner off,...

Installing the Software 33 Installing the Software Notice Before installing the software, be sure to open and read the Readme.txt file onthe setup disc. The setup disc included with the scanner contains the following software: ● ISIS/TWAIN driverThis driver allows this scanner to be used with ISIS-c...

34 Installing the Software 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc in the PC’s CD-ROM drive. 3. On the Start menu, Click Run. The...

Installing the Software 35 Uninstalling the ISIS/TWAIN Driver Follow the procedure described below to uninstall the ISIS/TWAIN driver. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,or Windows XP, be sure to log on as a user with administrator privileges. 1. On the Sta...

36 Installing the Software 2. Double-click the “Add/Remove Programs” icon. Note If you are using Windows XP, click the “Add or Remove Programs” icon. The “Add/Remove Programs Properties” dialog box is displayed. Note If you are using Windows XP, the “Add or Remove Programs” dialog box isdisplayed. 3...

Installing the Software 37 The “Confirm File Deletion” dialog box is displayed. 4. Click the Yes button to start the uninstaller. Follow the instructions on the screen and complete the uninstallation process.

38 Installing the Software Installing CapturePerfect Follow the procedure described below to install CapturePerfect. 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,or Windows XP, be sure to log on as a user with administrator privile...

Installing the Software 39 Uninstalling CapturePerfect Follow the procedure described below to uninstall CapturePerfect. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,or Windows XP, be sure to log on as a user with administrator privileges. 1. On the Start menu, point...

40 Installing the Software The “Add/Remove Programs Properties” dialog box is displayed. Note If you are using Windows XP, the “Add or Remove Programs” dialog box isdisplayed. 3. Select “CapturePerfect” from the list, and then click the Add/Remove button. Note If you are using Windows XP, click the ...

Using the Software 41 Using the Software Using the ISIS/TWAIN Driver The ISIS/TWAIN driver help describes how to use the ISIS/TWAIN driver.To access the ISIS/TWAIN driver help, click Start - Programs (when usingWindows XP, click All Programs) - Canon Document Scanner - Canon DR-2080C Help, or click ...

42 Using the Software Using CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in theCapturePerfect help. From the Help menu on the CapturePerfect menu bar,click Help, then refer to the explanati...

Using the Software 43 Closing CapturePerfect 1. On the File menu, click Exit. CapturePerfect closes.

44 Using the Software Starting Up CapturePerfect by the Event Driven Function The DR-2080C and CapturePerfect together support the “Scanner Event”driven function of Windows.When the ISIS/TWAIN driver and CapturePerfect are installed in the PC,pressing the Start button on the scanner starts up Captur...

Using the Software 45 2. Select [CANON DR-2080C SCSI] (or, [CANON DR-2080C USB]) to display[Properties]. “Scanner and Camera” Properties (Window 98) “Scanner and Camera” folder (Windows XP) 3. Click the [Event] tab.

Using the Scanner 47 Using the Scanner Documents This scanner is able to scan documents ranging in size from business cards tolegal size documents. The scannable size range is: Width: 2.2 in. to 8.5 in. (55 mm to 216 mm) Length: 2.8 in. to 11.7 in. (70 mm to 297 mm) with page separationmode2.8 in. t...

48 Using the Scanner Loading a Document for Scanning Make preparations based on the size of the document and the feeding methodthat you want to use, and then load the document for scanning. Preparing for Scanning 1. Open the top cover. 2. Check the position of the feed selection lever and set it acc...

Using the Scanner 49 3. Align and set the document stop provided with the unit to the size of thedocument to be scanned. By using the document stop, you can preventdocuments from becoming disorganized when they come out from thedocument eject opening. Scanning Long Documents When scanning documents ...

Using the Scanner 51 5. Load the document in the document feed opening. Note ● Orient the document with the back side facing forward and top edgepointing down, and then load it into the document feed opening. ● If the document falls forward because the paper is too thin, pull out thepaper feed exten...

52 Using the Scanner 6. Adjust the paper side guides. Note Before starting a scan, make sure that the document is loaded in the scannercorrectly. Scanning a curled document or a creased document can damage thedocument. 7. Perform the scanning operation in accordance with the normal operatingprocedur...

Using the Scanner 53 Clearing Paper Jams If a paper jam occurs in the scanner, follow the procedure described below. CAUTIONBe careful when removing jammed paper. It is possible to cutyour hand on the edge of a sheet of paper. 1. If the paper feed tray is closed, open it. 2. While squeezing the OPEN...

Regular Maintenance 55 Regular Maintenance Clean the scanner on a regular basis as described below in order to maintainpeak scanning quality. CAUTIONFor safety’s sake, always turn the unit off and unplug the powercord before cleaning the unit. However, because the power mustbe on when cleaning the m...

56 Regular Maintenance Cleaning the Scanning Glass and Transport Rollers 1. Turn the power off and unplug the power cord from the power outlet. 2. Open the paper feed tray. 3. While squeezing the OPEN release, open the front unit towards you. 4. Wipe the scanning glass (the shaded portion ■ in the i...

Regular Maintenance 57 Removing the Retard Roller 1. Open the roller cover inside the front unit by lifting it at the edge. 2. Raise the roller lock lever ➀ , and slide it in the direction of the arrow ➁ . 3. Remove the retard roller from its spindle by sliding it to the left.

58 Regular Maintenance Reinstalling the Retard Roller 1. Insert the retard roller into the groove inside the roller cover, and align thenotch in the roller with the spindle on the front unit. 2. Slide the roller lock lever to the right, and set it into the hollow to the left ofthe retard roller. 3. ...

Regular Maintenance 59 4. Close the roller cover. Make sure that the cover clicks into place and isreturned to its original position. Removing the Feed Roller 1. Open the roller cover inside the scanner. To open the cover, set your finger inthe groove and lift. 2. Raise the roller lock lever ➀ , and...

60 Regular Maintenance 3. Remove the feed roller from its spindle by sliding it to the left. Reinstalling the Feed Roller Set the feed roller into the space inside the roller cover on the scanner, fastenit in place with the lock lever, and close the roller cover. For details, see“Installing the Feed...

Regular Maintenance 61 CAUTION ● The front unit and scanner itself contain a metal roller. Be sureto wipe both clean. However, do not spray water or cleaningsolution directly onto the rollers. Doing so could damage thescanner’s light source or precision optical components. Alsonote that because the ...

62 Regular Maintenance Resetting the Counter 1. Open the “Scanner and Camera” folder in the Control Panel. Note ● Windows 95/NT do not display the “Scanner and Camera” folder. ● The displayed dialog box differs depending on Windows you are using.• Windows 98/2000 display the “Scanner and Camera Prop...

64 Troubleshooting Troubleshooting This section describes common problems that may occur while you are usingthe scanner, and how to resolve them. Refer to the troubleshooting section related to the problem that you haveencountered. The scanner does not turn on ..........................................

Troubleshooting 65 ✘ The PC does not recognize the scanner (connecting via SCSI) The following are possible causes of the PC failing to recognize the scanner.Check each possible cause. Cause The scanner is not connected correctly. Action Check all the SCSI cable connections between the scanner, theS...

68 Troubleshooting ✘ Images are not scanned Check the following if the scanner does not scan an image even though thescanning operation is being performed: ● Is the scanner correctly connected to the PC? ● Has the scanner driver been installed? ● Has the application software been installed correctly...

Troubleshooting 69 ✘ Documents are not ejected properly When you set and scan a multi-page document, individual pages of thedocument are not fully ejected from the eject rollers. (The trailing edge stickspartway inside the scanner.). Cause This is not a jam. The scanner is designed to stop at a cert...

70 Troubleshooting Cause Attempting to use a function of the DR-2080C that is notsupported by the application software. Action Some application software may not support certain functions,such as automatically detecting the paper size or changing thescanning mode/resolution through the scan panel. Us...

Specifications 71 Specifications Type Compact Document Scanner Scanning document size Width: 2.2 in. to 8.5 in. (55 mm to 216 mm) Length: 2.8 in. to 11.7 in. (70 mm to 297 mm)with page separation mode2.8 in. to 14 in. (70 mm to 355 mm) withbypass mode Thickness: 0.0024 in. to 0.0059 in. (0.06 mm to ...

72 Specifications Noise Not more than 66 dB Operating environment Temperature: 10 ° C to 32.5 ° C Humidity: 20% to 80% RH AC adapter Model MH3-2053 (100-120V Type) Input 100-120 V AC, 60 Hz, 0.7 A Output 15 V DC, 2 A Power consumption Less than 0.5 W (the AC adapter by itself or with thescanner off)...

Index 73 Index A AC adapter ................................................ 72 C CapturePerfect ................................... 42, 44 Install .................................................... 38Uninstall ............................................... 39 Cleaning Metal Roller .................

CANON ELECTRONICS INC.1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC.ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A. CANON CANADA INC.6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V.BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180EG AMSTELVEEN, THE NETHER...