Canon AXIS 1650- Manuals

Page 2 - Safety Notices; Section 1; USA

Safety Notices 2 AXIS 1650 User’s Manual Section 1 Safety Notices Take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions when using this product. Important: Observe “Important:” in the text to avoid operational impair...

Page 3 - Table of Contents; Section 2

Table of Contents AXIS 1650 User’s Manual 3 Section 2 Table of Contents Section 1 Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Section 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Section 3 Preface . . . . . . ....

Page 5 - Preface; Section 3; About this Manual

Preface AXIS 1650 User’s Manual 5 Section 3 Preface Thank you for purchasing the AXIS 1650. This product has been developed to connect your Canon printer anywhere in your network, allowing all network users access to shared printer resources. About this Manual This manual is applicable for the AXIS ...

Page 6 - If you are connected to the Internet, you can:

Preface 6 AXIS 1650 User’s Manual If you are connected to the Internet, you can: • Download user documentation and firmware updates • Find answers to previously resolved problems in the FAQ database. Search by product, category or phrase • Report problems to Axis support staff by logging in to your ...

Page 7 - Product Overview; Section 4; Package Contents; The AXIS 1650 Network Print Server; Supported Devices; products. AXIS 1650 supports host-based printing methods such as

Product Overview AXIS 1650 User’s Manual 7 Section 4 Product Overview Package Contents The AXIS 1650 Network Print Server Supported Devices AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Te...

Page 8 - Windows Me; NetSpot Device Installer (for IP setting) and then AXIS CAPT; Speed

Product Overview 8 AXIS 1650 User’s Manual Supported Environments The AXIS 1650 supports printing over TCP/IP from the following clients: • Windows 98 • Windows Me • Windows 2000 • Windows XP • Windows Server 2003 • Netware Installation and Integration The installation of the AXIS 1650 and its integ...

Page 9 - Printer Ports

Product Overview AXIS 1650 User’s Manual 9 Printer Ports • One Low- and Full-Speed USB 1.1 port that also works with USB 2.0. Hi-Speed is not supported. • One high-speed IEEE 1284 compatible parallel port that plugs directly into the printer´s parallel port. AXIS 1650 is featured with two ports for ...

Page 10 - Print Server Installation; Section 5; Follow these steps to install and configure your AXIS 1650:; Connect the Hardware; power adapter is disconnected.; serial number, found on the underside label of the print server,; the printer directly to the LPT port or use a printer cable.

Print Server Installation 10 AXIS 1650 User’s Manual Section 5 Print Server Installation Follow these steps to install and configure your AXIS 1650: 1. Connect the Hardware, on page 102. Set the IP Address, on page 113. Windows Installation, on page 17 Connect the Hardware Backside label of print se...

Page 11 - or on a wall, using the supplied clip and holder.; Set the IP Address; you choose to obtain a DHCP address for the print server from these; Set a Static IP; print server on the network and assign an IP address to it.

Print Server Installation AXIS 1650 User’s Manual 11 7. Optionally, you can mount the print server e.g. on the back of the printer or on a wall, using the supplied clip and holder. Set the IP Address Before setting the IP address, make a note of the print server’s serial number (S/N), located on its...

Page 12 - the default IP address; Server menu, select Set IP Address. The Set IP Address dialog; print server in the list and select; Server Home Page from the Server menu.; All AXIS 1650 have the default IP address

Print Server Installation 12 AXIS 1650 User’s Manual 1. Install AXIS IP JumpStarter, it is available on the AXIS 1650 CD and on www.axis.com 2. Select a print server from the Serial Number list. All AXIS 1650 appear with the default IP address 192.168.0.90. If you are installing several AXIS 1650, c...

Page 13 - If the host returns

Print Server Installation AXIS 1650 User’s Manual 13 Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003 1. Open a Command Prompt and type: Example: 2. If the host returns Reply from 192.168.3.191 ... or a similar message, the IP address has been set successfully. If the host returns Req...

Page 14 - Set an IP Address with NetSpot Device Installer software; an IP address and manage Canon devices connected to your network.; Set the IP Aaddress; The MAC address is based on the Serial Number (

Print Server Installation 14 AXIS 1650 User’s Manual Set an IP Address with NetSpot Device Installer software NetSpot Device Installer is software from Canon that allows you to assign an IP address and manage Canon devices connected to your network. NetSpot Device Installer software is supplied on C...

Page 15 - Initial Settings dialogue box, select the AXIS 1650 print server; from the; Product Type drop-down list and click Next.; After you have finished the configuration, click; IP Address Host Names; If you are using host names, you can map a unique host name to the IP

Print Server Installation AXIS 1650 User’s Manual 15 4. From the Initial Settings dialogue box, select the AXIS 1650 print server from the Product Type drop-down list and click Next. 5. Next, configure the TCP/IP protocol: 6. After you have finished the configuration, click OK. Note: If you get a me...

Page 16 - Notes

Print Server Installation 16 AXIS 1650 User’s Manual Notes • You need to know the Ethernet address of your AXIS 1650 to perform the installation. The Ethernet address is based on the serial number of your AXIS 1650. For example, an AXIS 1650 with the serial number of 00408C181CF0, will have the corr...

Page 17 - Windows Installation; Section 6; Installing Printer Ports using AXIS CAPT Print Monitor; AXIS CAPT Print Monitor is a Windows component that has been; and Me

Windows Installation AXIS 1650 User’s Manual 17 Section 6 Windows Installation Installing Printer Ports using AXIS CAPT Print Monitor AXIS CAPT Print Monitor is a Windows component that has been developed for network printing. AXIS CAPT Print Monitor is the recommended tool for Canon printers, inclu...

Page 18 - Read the License Agreement and click; Yes if you accept the terms.; broadcast status updates and enable unicast, see; Allow this application to process incoming network printer; In Windows XP SP 2, UDP port 10260 must be open in the Internet

Windows Installation 18 AXIS 1650 User’s Manual 3. Read the License Agreement and click Yes if you accept the terms. 4. Leave this check-box unchecked* and click Next. (If you want to disable broadcast status updates and enable unicast, see Enabling Unicast Network Communication, on page 64.) Window...

Page 19 - Windows XP SP2 is installed, if Allow this application to process

Windows Installation AXIS 1650 User’s Manual 19 Windows XP SP2 is installed, if Allow this application to process incoming network printer information on the local subnet is checked. 5. Click Finish to finish the installation. 6. Windows XP/Server 2003:Go to Start | Printers and Faxes and click the ...

Page 20 - Local Printer attached to this computer. Make sure the; Note: AXIS CAPT Port is used for all Canon printers, including CAPT,

Windows Installation 20 AXIS 1650 User’s Manual 7. Select Local Printer attached to this computer. Make sure the Automatically detect and install my Plug and Play printer check box is not checked. Click Next. 8. Click the Create a new port radio button and select AXIS CAPT Port. Click Next. Note: AX...

Page 21 - the; Available network printers list and click OK.; make it your default printer. Click; Next and

Windows Installation AXIS 1650 User’s Manual 21 9. The AXIS CAPT Port pop-up window will appear. Select your AXIS 1650 from the Available network printers list and click OK. 10. Select Manufacturer and Printer from the driver list. Click Next. 11. Choose whether you want to keep the existing driver ...

Page 22 - Follow the procedure below to install TCP/IP Ports from a Windows

Windows Installation 22 AXIS 1650 User’s Manual 14. Print a test page to verify. You have now completed the installation. Print Server Installation using AXIS CAPT Print Monitor in Windows 98 and Me Follow the procedure below to install TCP/IP Ports from a Windows 98/Me workstation: 1. Install the A...

Page 23 - Leave this check-box unchecked and click; Finish to finish the installation.; Choose an appropriate printer driver for your printer.

Windows Installation AXIS 1650 User’s Manual 23 4. Leave this check-box unchecked and click Next. (If you want to disable broadcast status updates and enable unicast, See Enabling Unicast Network Communication, on page 64 for instructions.) 5. Click Finish to finish the installation. 6. Select Setti...

Page 24 - Remote Printer Port; Properties from the menu.; AXIS CAPT Port is used for all Canon printers, including CAPT, Canon; OK to return to the

Windows Installation 24 AXIS 1650 User’s Manual 10. Select the port you wish to use and click OK. 11. Enter a descriptive name for your printer and click Next> 12. Click the checkbox if you want to print a test page and click Finish. Remote Printer Port 1. The printer you defined above is now dis...

Page 25 - icon to start the; Start | Settings | Printers and click the Add Printer icon to start; Local Printer attached to this computer and make sure the; from the list. Click; Next and the Add Standard TCP/IP Printer Port Wizard

Windows Installation AXIS 1650 User’s Manual 25 Print Server Installation using the Standard TCP/IP Port in Windows 2000/XP/2003 Follow the instructions below to use the Windows Standard TCP/IP Port to add a network printer in Windows 2000/ Windows XP/2003. Windows XP/ Server 2003: 1. Go to Start | ...

Page 26 - Printer Name or IP Address field, enter the IP address of the print; The; Port Name field will be filled in automatically. Click Next.; Click; Next. Supply a name for the printer and; choose whether you want to make it your default printer. Click

Windows Installation 26 AXIS 1650 User’s Manual 4. In the Printer Name or IP Address field, enter the IP address of the print server. Example: 192.168.3.191. The Port Name field will be filled in automatically. Click Next. 5. Select Manufacturer and Printer from the lists. Click Next. 6. If you alre...

Page 27 - installed printer and right-click, choose

Windows Installation AXIS 1650 User’s Manual 27 8. Next, from your desktop, go to Start | Printers (and Faxes). Highlight the installed printer and right-click, choose Properties, then Ports | Configure Port. 9. In the LPR Settings - Queue Name field, you will see the value "z". In the Queue...

Page 28 - Adding Printers in NetWare; Section 7; iPrint; Setup using NetWare 6.5; Check Print Manager

Adding Printers in NetWare 28 AXIS 1650 User’s Manual Section 7 Adding Printers in NetWare This section describes how to continue the installation of the AXIS 1650 in a NetWare environment. iPrint Using iPrint in the NetWare environment, users simply point to a Web page that displays all printers av...

Page 29 - Broker. Its state has to be active as well.; The Create Printer dialogue appears.; Select Novell gateway as Gateway type and click Next.; To configure the gateway, enter Host IP address or Host name of the; As default, PASSTHROUGH is suggested as LPR Printer name. Change

Adding Printers in NetWare AXIS 1650 User’s Manual 29 To check the state of the Broker, select Roles and Tasks | iPrint | Manage Broker. Its state has to be active as well. Create a Printer In the iManager, click Roles and Tasks | iPrint | Create Printer. The Create Printer dialogue appears. Type a ...

Page 30 - Select Default Drivers; drivers can be added from the Manage Broker task). Click Next.; Manage the Newly; Select Roles and Tasks | iPrint | Manage Printer and specify which; To Browse for a Printer; NDPS Printer name field, click the Browse icon.; Browse to your

Adding Printers in NetWare 30 AXIS 1650 User’s Manual Select Default Drivers for Your Platforms For each platform in your network, select the default printer drivers to install (the drivers presented are those registered in the Broker; new drivers can be added from the Manage Broker task). Click Nex...

Page 31 - it in the Contents list and click Apply.; Check Printer Health; Select Roles and Tasks | iPrint | Manage Printer | Printer Health

Adding Printers in NetWare AXIS 1650 User’s Manual 31 it in the Contents list and click Apply. Check Printer Health Select Roles and Tasks | iPrint | Manage Printer | Printer Health Monitor to check the health of the printer.

Page 32 - Click Back to return to the Manage Printer main page.; Enable iPrint Support; In the Manage Printer main page, click the Client Support tab.; Make the Newly

Adding Printers in NetWare 32 AXIS 1650 User’s Manual Click Back to return to the Manage Printer main page. Enable iPrint Support In the Manage Printer main page, click the Client Support tab. To enable iPrint support, check Enable iPrint support, click Apply and OK. Make the Newly Created Printer A...

Page 33 - CanonMF). The Printer URL and Mouse Over Text will; Network printer and Browse for a printer.

Adding Printers in NetWare AXIS 1650 User’s Manual 33 5. From the Printer List, select the printer agent you want associated with this printer icon (e.g. CanonMF). The Printer URL and Mouse Over Text will automatically be filled in with the printer agent information. Printer URL is the URL created f...

Page 34 - Setup using NetWare 6.0; Launch the iManager

Adding Printers in NetWare 34 AXIS 1650 User’s Manual 5. Select Container (e.g. Axis) and the printer (e.g. CanonMF). 6. Wait for the printer to be installed. 7. Finally, print a test page. Setup using NetWare 6.0 Setting up iPrint in a NetWare 6.0 environment is rather similar to performing the sam...

Page 35 - Next to the

Adding Printers in NetWare AXIS 1650 User’s Manual 35 Configure Novell LPR Gateway for the Created Printer To configure the gateway, enter Host IP address of the AXIS 1650 (e.g. 171.15.114.137). Instead of the Host IP address you can use the Host name (e.g. CanonMF.tl.com). As Printer name, enter th...

Page 36 - it in the Contents list and click Next.; Select Printer Health Monitor to check the health of the printer.

Adding Printers in NetWare 36 AXIS 1650 User’s Manual default container to find the newly created printer (e.g. CanonMF), select it in the Contents list and click Next. Check Printer Health Select Printer Health Monitor to check the health of the printer. Click Back to return to the Manage Printer m...

Page 37 - Enable IPP Access; To enable IPP access, check Enable IPP access, click Apply and OK.

Adding Printers in NetWare AXIS 1650 User’s Manual 37 Enable IPP Access In the Manage Printer main page, click the Client Support tab. To enable IPP access, check Enable IPP access, click Apply and OK. Make the Newly Created Printer Available (Optional) Using the iPrint Map Designer tool, you can qu...

Page 38 - Installing the Printer

Adding Printers in NetWare 38 AXIS 1650 User’s Manual Installing the Printer Locally The printer is now accessible all over the network and will be automatically installed on any client when needed. In the HTML-page just created, double-click the new printer icon. A dialogue box will appear, waiting...

Page 39 - Manual Installation of

Adding Printers in NetWare AXIS 1650 User’s Manual 39 Manual Installation of the Printer Locally In case you need to install the printer locally, use Windows’ Add Printer Wizard in the usual manner: 1. Ensure that iPrint Client is installed. 2. Start | Printers and Faxes | Add a printer. 3. Select N...

Page 40 - Print Server Management and Configuration; Section 8; Change print server parameters; Configuration Overview; Embedded Web Pages using a Web Browser - See page 40.; Print Server Management from the Embedded Web Pages; User Mode; Available from the User Mode” on page 42.; Admin Mode; Admin Mode” on page 44.

Print Server Management and Configuration 40 AXIS 1650 User’s Manual Section 8 Print Server Management and Configuration The management and configuration tools that are supported by the AXIS 1650 allow you to: • Change print server parameters • Receive extended information about print jobs • Receive...

Page 41 - Accessing the Web Pages; Follow these steps to access the AXIS 1650 embedded Web pages:; Enter; You may be prompted for a password in a new and unconfigured print; root and leave the password field empty.

Print Server Management and Configuration AXIS 1650 User’s Manual 41 Accessing the Web Pages Follow these steps to access the AXIS 1650 embedded Web pages: 1. Enter the print server’s IP address (or host name) in the Location/Address field of your Web browser. Press Enter 2. The Printer Overview pag...

Page 42 - Services Available from the User Mode; The following services are available from the User mode.

Print Server Management and Configuration 42 AXIS 1650 User’s Manual Services Available from the User Mode The following services are available from the User mode. A click on the question mark will open the print server’s help pages. Click on the Axis logotype t serve811mD0.001 Axis’ home page.

Page 43 - Print Jobs; erased each time the print server is restarted.; Port - shows the port to which the printer is connected.; ready; and; Time and Print Results. Note that the time when the document was; Help

Print Server Management and Configuration AXIS 1650 User’s Manual 43 Print Jobs Select Print Jobs to view Printer Usage, showing the accumulated usage of the printer connected to your print server. The Printer Usage log is erased each time the print server is restarted. • Printer - shows the printer...

Page 44 - Services Available from the Admin Mode; Click on the Axis logotype to reach Axis’ home page.; This Print Server; Server Installation” on page 10.; Restrictions; tab. For additional

Print Server Management and Configuration 44 AXIS 1650 User’s Manual Services Available from the Admin Mode Click on the Axis logotype to reach Axis’ home page. A click on the question mark will open the print server’s help pages. The following services are available from the Admin mode. This Print ...

Page 45 - Printer Page; Busy and the User name will be shown.

Print Server Management and Configuration AXIS 1650 User’s Manual 45 Printer Page By clicking the printer icon on the This Print Server page, a Printer page opens, allowing you to view the status and the supported capabilities of the connected printer. On some printer models, you can also print a te...

Page 46 - Network Settings; To change the print server’s network settings, select; Settings | Detailed View; “Setting Network; Support; You must have an e-mail account and an e-mail program set up on your; Axis distributor or office link.

Print Server Management and Configuration 46 AXIS 1650 User’s Manual Network Settings From the Network Settings page you can set all parameters that control the network traffic to and from the AXIS 1650. You can enable or disable any of the supported network protocols and fine-tune the parameters. C...

Page 47 - Setting General Parameters; 00_FULL_DX or let the print server sense the correct speed

Print Server Management and Configuration AXIS 1650 User’s Manual 47 Setting General Parameters To change the print server’s general parameters, select Admin | General Settings => Change in the Web interface. Note: All print server settings have default values that have been carefully selected by...

Page 48 - Setting Restrictions

Print Server Management and Configuration 48 AXIS 1650 User’s Manual Setting Restrictions To change print server permissions and restrictions, select Admin | General Settings => Change and select the Restrictions tab in the Web interface. TCP Restriction Enabled When set to Yes, users specified i...

Page 49 - Setting Network Protocol Parameters; in the Web interface.

Print Server Management and Configuration AXIS 1650 User’s Manual 49 using the SLP protocol. Default = Accept SLP Restriction IP Address List Users specified here are rejected or accepted.IP addresses or ranges of IP addresses can be specified as follows: Example IP addresses: 10.13.16.150, 10.13.16...

Page 52 - Print Server Management Using FTP; the IP Address” on page 11, you can change the AXIS 1650 parameter; if the default password has been; Edit the file using your preferred text editor.; FTP Help; ftp npserver; root

Print Server Management and Configuration 52 AXIS 1650 User’s Manual Print Server Management Using FTP Having assigned an IP address to your AXIS 1650, as described in “Set the IP Address” on page 11, you can change the AXIS 1650 parameter settings using the File Transport Protocol (FTP). Editing th...

Page 53 - Print Server Management Using SNMP; General Information; relevant parts of MIB-II

Print Server Management and Configuration AXIS 1650 User’s Manual 53 Print Server Management Using SNMP You can use SNMP (Simple Network Management Protocol) to monitor and configure the AXIS 1650 remotely. All major functions for print servers are supported. General Information SNMP refers to a set...

Page 54 - Section 9; This section describes how to scan via an AXIS 1650 using AXIS; manual. The examples here show Windows XP and a Canon MF3110 with; Installing AXIS ScanClient; Locate AXISScanClient_SetUp.exe on the AXIS 1650 CD or on

Scanning with AXIS 1650 54 AXIS 1650 User’s Manual Section 9 Scanning with AXIS 1650 If your Canon device also functions as a scanner, you can use your AXIS 1650 as a scanner server, too. This section describes how to scan via an AXIS 1650 using AXIS ScanClient. For general information on scanning, ...

Page 56 - Using AXIS ScanClient; If the scanner is busy; AXIS ScanClient will show who is using it, otherwise; you will be connected, as indicated on the message line.; Invoking a Scan from your Computer

Scanning with AXIS 1650 56 AXIS 1650 User’s Manual Using AXIS ScanClient Connect to the Scanner 1. Start AXIS ScanClient (Start | AXIS ScanClient). The client will search the network for scanning devices. Mark the one you would like to use by clicking on it in the list (you can also select a scanner...

Page 57 - Canon MF Toolbox —; When ready, close the Save dialog and the Canon MF Toolbox.; Example using Microsoft’s Scanner and Camera Wizard:; AXIS ScanClient - see page 56 - and place; the object to be scanned on the scanner flatbed.; Scanners and Cameras.

Scanning with AXIS 1650 AXIS 1650 User’s Manual 57 1. On your computer, start the receiving program (e.g. Canon MF Toolbox — Scan Function). Click [Save] to open the Save dialog. 2. In the Save dialog, click [Start] to start scanning. 3. When ready, close the Save dialog and the Canon MF Toolbox. 4....

Page 58 - and select; Get picture using Scanner Wizard.; Select scanning parameters and start scanning.; Connect to the scanner with; AXIS ScanClient - see page 56 and place the; object to be scanned on the scanner flatbed.

Scanning with AXIS 1650 58 AXIS 1650 User’s Manual 4. Right-click the device you would like to use (example: WIA Canon MF3110) and select Get picture using Scanner Wizard. 5. The Scanner and Camera Wizard starts. Click [Next]. 6. Select scanning parameters and start scanning. 7. When scanning is rea...

Page 59 - Invoking a Scan from the Canon Device; First time only; the Canon device to a certain client computer. By setting these

Scanning with AXIS 1650 AXIS 1650 User’s Manual 59 3. Select File | Acquire | TWAIN... 4. Select source (e.g. MF3110). 5. Select scanning parameters and start scanning. 6. When scanning is ready, disconnect from the scanner - see page 56 and remove the scanned object from the flatbed. Invoking a Sca...

Page 60 - Events and select the event Canon MF3110 Scan Button.; Under; Start a Scan from the

Scanning with AXIS 1650 60 AXIS 1650 User’s Manual 5. Select Events and select the event Canon MF3110 Scan Button. Under Actions, select the option Start this program and select MF ToolBox Ver4.7 in the list. Click [OK]. Now you have prepared your computer to automatically take care of scannings inv...

Page 61 - The Test Button; Factory Default; and is used to perform a Factory Default:; Canon BubbleJet; button can be used for the following operations:; once to print a test page. The test page contains

The Test Button AXIS 1650 User’s Manual 61 Section 10 The Test Button Factory Default The test button is located on the front right hand side of the print server and is used to perform a Factory Default: 1. Remove the power adapter to switch off the print server.2. Press and hold down the test butto...

Page 62 - Upgrading the Firmware; allows data to be erased and re-written, which is why you can install; Upgrading using FTP; The print server must have a valid IP address.; cmd in the Run Window; The DOS Command Prompt window will open. Make sure you are working; cd Axis; Firmware is internal print server software that determines its

Upgrading the Firmware 62 AXIS 1650 User’s Manual Section 11 Upgrading the Firmware The print server’s firmware is stored in its Flash memory. This memory retains its data content even after the power is removed. Flash memory allows data to be erased and re-written, which is why you can install firm...

Page 63 - Connect to the print server using ftp: Type; root (if the default password has; been changed then it must also be entered). Press; bin and press Enter.; Type

Upgrading the Firmware AXIS 1650 User’s Manual 63 5. Type dir and press Enter. The Axis directory you have created will display a list of all files. 6. Connect to the print server using ftp: Type ftp 10.13.4.105 (this example uses print server IP address 10.13.4.105) 7. Enter the user name, the defa...

Page 64 - Enabling Unicast Network Communication; without elevating network traffic.; open. Under CAPT Port Settings, set Unicast Communications Mode to; Go on to Install the AXIS CAPT Print Monitor on page 66.; root (if the default password has been changed then it must; Open the config file using any text editor.

Enabling Unicast Network Communication 64 AXIS 1650 User’s Manual Section 12 Enabling Unicast Network Communication AXIS CAPT Print Monitor uses broadcast communication, so that status information from the print server can be shared between several users without elevating network traffic. Broadcast ...

Page 65 - Locate the parameter named; YES; Once the editing is complete, save the file as; config; Note: This will also change the Print Server Name parameter so that; it is based on the print server’s IP address, with “_” replacing the “.”

Enabling Unicast Network Communication AXIS 1650 User’s Manual 65 7. Locate the parameter named USE_IP_PORT_NAME: type YES 8. Once the editing is complete, save the file as config 9. In the Command prompt window, upload the configuration file to the AXIS 1650 by typingput config CONFIG 10. To exit F...

Page 66 - Install AXIS CAPT Print; start the Add Printer Wizard. Click Next.

Enabling Unicast Network Communication 66 AXIS 1650 User’s Manual Install AXIS CAPT Print Monitor 1. Install AXIS CAPT Print Monitor software on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com. Click your way through the program. 2. During the software setup, you ...

Page 67 - Manufacturer and Printer from the driver list. Click Next.

Enabling Unicast Network Communication AXIS 1650 User’s Manual 67 7. A pop-up window will appear. Enter the IP address of the AXIS 1650. 8. Select Manufacturer and Printer from the driver list. Click Next. 9. Choose whether you want to keep the existing driver or to replace it. If you already have t...

Page 68 - Internet Connection Firewall in Windows XP SP2; If you have upgraded to Windows XP SP2, you need to open UDP port

Internet Connection Firewall in Windows XP SP2 68 AXIS 1650 User’s Manual Section 13 Internet Connection Firewall in Windows XP SP2 If you have upgraded to Windows XP SP2, you need to open UDP port 10260 in the Internet Connection Firewall when using Broadcast communication. For Unicast comunication...

Page 69 - Exceptions and highlight AXIS CAPT Port.

Internet Connection Firewall in Windows XP SP2 AXIS 1650 User’s Manual 69 4. Click Exceptions and highlight AXIS CAPT Port. 5. Click OK. Note: If you accidentally delete the AXIS CAPT Port and want to recreate it, go to Exceptions | Add Port and configure the port.

Page 70 - Technical Specifications; Microsoft Windows

Technical Specifications 70 AXIS 1650 User’s Manual Section 14 Technical Specifications Supported Devices AXIS 1650 is developed to network Canon printers and multifunctional products. If your Canon device also functions as a scanner, you can use your AXIS 1650 as a scanner server, too. AXIS 1650 su...

Page 71 - EMC

Technical Specifications AXIS 1650 User’s Manual 71 Power Consumption Maximum 5.6 W. Power provided by Power Adapter type PS-H: 5.1V DC 2000 mA Dimensions Height x Width x Depth 1.1in (29 mm), 2.4in (62 mm), 4.6in (117 mm) Weight 0.18lb (81g) Environmental Temperature 40 - 105 °F (5 - 40 °C) Approva...

Page 72 - Index

Index 72 AXIS 1650 User’s Manual A Adhesive Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adhesive Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Admin mode . . . . . . . . . . . . . . . . ...