Canon 70- Manuals

3 „ Controls a Power Lamp b ON/OFF Button (p. 9) c Indicators (p. 4) d Zoom Lever ( p. 14 , Advanced Guide p. 76) Shooting: (Wide Angle)/ (Telephoto) Playback: (Index)/ (Magnify) e Shutter Button (p. 10) f Speaker g Mode Switch ( pp. 9 , 11 ) h (Print/Share) Button ( pp. 22 , 30 , Advanced Guide pp....

4 Indicators The camera indicators light or blink under the following circumstances. „ Upper Indicator „ Lower Indicator Never do the following while an indicator is blinking green. These actions may corrupt image data. • Shake or jolt the camera• Shut off the power, or open the memory card slot/bat...

5 1. Charging the Battery. Charge the battery before use under the following circumstances.• When using the battery for the first time.• When the "Change the battery pack." message displays. 1. Insert the battery into the battery charger.2. Plug the battery charger (CB-2LV) into a power outl...

6 2. Installing the Battery. 1. Slide the memory card slot/battery cover and open it ( a , b ). 2. Push the battery lock in the direction of the arrow ( c ) and insert the battery until it locks. To remove the battery, push the battery lock in the direction of the arrow ( c ) and hold it while pulli...

7 „ To Remove the Memory Card Push the memory card with your finger or the toggle on the wrist strap until the memory card clicks and then release it. You can use SD memory cards, SDHC memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. ...

8 First Time Settings „ Setting the Date/Time 1. Press the ON/OFF button ( a ). 2. Use the or button to select an item and the or button to change its value ( b ). To set the daylight saving option, select the icon and use the or button to configure the setting. 3. Confirm that the correct time is d...

9 „ Setting the Display Language 1. Slide the mode switch to (playback). 2. Hold down the FUNC./SET button and press the MENU button. 3. Use the , , or button to select a language and press the FUNC./SET button. The display language can also be set in the Set up menu (p. 21) . 1. Press the ON/OFF bu...

10 4. Focus and shoot. 1. Press the shutter button halfway to focus. When the camera focuses, it beeps twice and the indicator lights green (orange when the flash fires). In addition, a green AF frame appears in the LCD monitor on the portion of the image used to set the focus. 2. Press the shutter ...

11 Selecting a Shooting Mode 1. Slide the mode switch to (Rec.) or (Movie) ( a ). 2. Press the FUNC./SET button ( b ) and use the or button ( c ) to select a shooting mode. For a scene mode (p. 12) , select the mode (default setting) and press the MENU button to select the desired mode. 3. Press the...

12 „ Shooting Modes Still Images Auto The camera automatically selects settings. Manual Allows you to select settings yourself, such as the exposure compensation, white balance, my colors or ISO speed. Stitch Assist Allows you to shoot overlapping images that can later be merged (stitched) to create...

14 Using the Zoom 1. Press the zoom lever toward or . The zoom can be adjusted from 35 – 105 mm (focal length) in 35mm film equivalent terms. Using the Flash 1. Press the button ( a ) and use the or button to switch between modes ( b ). Î See the Advanced Guide : Red-Eye Reduction Function (p. 35). ...

15 Shooting Close-Ups/Infinity Shots 1. Press the / button ( a ) and use the or button to switch between modes ( b ). To Cancel: press the / button and use the or button to display (Normal). Macro Use this mode to shoot close-ups of flowers or small items. Image Area at Minimum Focusing Distance fro...

17 „ Changing the Delay Time and Number of Shots ( ) 1. In the (Rec.) menu, select [Self- timer] and press the FUNC./SET button. 2. Use the or button to select [Delay] or [Shots] and the or button to change the setting and press the FUNC./SET button. 3. Press the MENU button. Î See Menus and Setting...

18 1. Slide the mode switch to (playback) ( a ). The last recorded image will display. Or if you have replayed images, the last image viewed will display (Resume Playback)If the memory card has been switched, or the images on the memory card have been edited with a computer, the newest image on the ...

19 1. In the playback mode, use the or button to select an image to erase ( a ) and press the button ( b ). 2. Confirm that [Erase] is selected and press the FUNC./SET button ( c ). To exit instead of erasing, select [Cancel]. Erasing Please note that erased images cannot be recovered. Exercise adeq...

20 Settings for the shooting or playback modes or such camera settings as the print settings, date/time and sounds are set using the FUNC. menu or the Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. a Slide the mode switch to or . b Press...

22 You can easily print by connecting the camera to a direct print compatible printer *1 with a cable and simply pressing the button on the camera. 1. Connect the camera to a direct print compatible printer and turn on the printer's power. *1 Since this camera uses a standard protocol (PictBridge), ...

23 2. Set the camera to the playback mode, turn on the power and confirm that , or is displayed in the upper left of the LCD monitor ( a ). • The button will light blue. • The displayed icon will vary according to the printer model.• will display in the movie mode. 3. Use the or button to select an ...

24 The following methods can be used to download images recorded by the camera to a computer. Some methods, depending on the OS used, may not be available. Please read System Requirements (p. 25) in advance. „ Camera to Computer Connection „ Using a Memory Card Reader A memory card reader can be use...

25 System Requirements Please install the software on a computer meeting the following minimum requirements. „ Windows „ Macintosh OS Windows 2000 Service Pack 4 Windows XP (including Service Pack 1 and Service Pack 2) Windows Vista Computer Model The above OS should be pre-installed on computers wi...

26 Preparing to Download Images „ Items to Prepare • Camera and computer• Canon Digital Camera Solution Disk supplied with the camera• Interface cable supplied with the camera 1. Install the software. 1. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. 2. Click [Easy Inst...

27 2. Connecting the camera to a computer. 1. Connect the supplied interface cable to the computer's USB port and to the camera's DIGITAL terminal. Use the toggle on the wrist strap or slip a fingernail under the edge of the camera's DIGITAL terminal cover, lift up and plug the interface cable in al...

30 Downloading Images Using the Camera (Direct Transfer) Use this method to download images using camera operations.Install the supplied software and adjust the computer settings before using this method for the first time (p. 26) . 1. Confirm that the Direct Transfer menu is displayed on the camera...

Safety Precautions Be sure to read, understand and follow the safety precautions below when using the camera, in order to prevent injury, burns or electrical shock to yourself and others. Be sure to also read the safety precautions listed in the Advanced Camera User Guide . Warnings • Do not trigger...

3 „ Controls a Power Lamp b ON/OFF Button (p. 9) c Indicators (p. 4) d Zoom Lever ( p. 14 , Advanced Guide p. 76) Shooting: (Wide Angle)/ (Telephoto) Playback: (Index)/ (Magnify) e Shutter Button (p. 10) f Speaker g Mode Switch ( pp. 9 , 11 ) h (Print/Share) Button ( pp. 22 , 30 , Advanced Guide pp....

4 Indicators The camera indicators light or blink under the following circumstances. „ Upper Indicator „ Lower Indicator Never do the following while an indicator is blinking green. These actions may corrupt image data. • Shake or jolt the camera• Shut off the power, or open the memory card slot/bat...

5 1. Charging the Battery. Charge the battery before use under the following circumstances.• When using the battery for the first time.• When the "Change the battery pack." message displays. 1. Insert the battery into the battery charger.2. Plug the battery charger (CB-2LV) into a power outl...

6 2. Installing the Battery. 1. Slide the memory card slot/battery cover and open it ( a , b ). 2. Push the battery lock in the direction of the arrow ( c ) and insert the battery until it locks. To remove the battery, push the battery lock in the direction of the arrow ( c ) and hold it while pulli...

7 „ To Remove the Memory Card Push the memory card with your finger or the toggle on the wrist strap until the memory card clicks and then release it. You can use SD memory cards, SDHC memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. ...

8 First Time Settings „ Setting the Date/Time 1. Press the ON/OFF button ( a ). 2. Use the or button to select an item and the or button to change its value ( b ). To set the daylight saving option, select the icon and use the or button to configure the setting. 3. Confirm that the correct time is d...

9 „ Setting the Display Language 1. Slide the mode switch to (playback). 2. Hold down the FUNC./SET button and press the MENU button. 3. Use the , , or button to select a language and press the FUNC./SET button. The display language can also be set in the Set up menu (p. 21) . 1. Press the ON/OFF bu...

10 4. Focus and shoot. 1. Press the shutter button halfway to focus. When the camera focuses, it beeps twice and the indicator lights green (orange when the flash fires). In addition, a green AF frame appears in the LCD monitor on the portion of the image used to set the focus. 2. Press the shutter ...

11 Selecting a Shooting Mode 1. Slide the mode switch to (Rec.) or (Movie) ( a ). 2. Press the FUNC./SET button ( b ) and use the or button ( c ) to select a shooting mode. For a scene mode (p. 12) , select the mode (default setting) and press the MENU button to select the desired mode. 3. Press the...

12 „ Shooting Modes Still Images Auto The camera automatically selects settings. Manual Allows you to select settings yourself, such as the exposure compensation, white balance, my colors or ISO speed. Stitch Assist Allows you to shoot overlapping images that can later be merged (stitched) to create...

14 Using the Zoom 1. Press the zoom lever toward or . The zoom can be adjusted from 35 – 105 mm (focal length) in 35mm film equivalent terms. Using the Flash 1. Press the button ( a ) and use the or button to switch between modes ( b ). Î See the Advanced Guide : Red-Eye Reduction Function (p. 35). ...

15 Shooting Close-Ups/Infinity Shots 1. Press the / button ( a ) and use the or button to switch between modes ( b ). To Cancel: press the / button and use the or button to display (Normal). Macro Use this mode to shoot close-ups of flowers or small items. Image Area at Minimum Focusing Distance fro...

17 „ Changing the Delay Time and Number of Shots ( ) 1. In the (Rec.) menu, select [Self- timer] and press the FUNC./SET button. 2. Use the or button to select [Delay] or [Shots] and the or button to change the setting and press the FUNC./SET button. 3. Press the MENU button. Î See Menus and Setting...

18 1. Slide the mode switch to (playback) ( a ). The last recorded image will display. Or if you have replayed images, the last image viewed will display (Resume Playback)If the memory card has been switched, or the images on the memory card have been edited with a computer, the newest image on the ...

19 1. In the playback mode, use the or button to select an image to erase ( a ) and press the button ( b ). 2. Confirm that [Erase] is selected and press the FUNC./SET button ( c ). To exit instead of erasing, select [Cancel]. Erasing Please note that erased images cannot be recovered. Exercise adeq...

20 Settings for the shooting or playback modes or such camera settings as the print settings, date/time and sounds are set using the FUNC. menu or the Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. a Slide the mode switch to or . b Press...

22 You can easily print by connecting the camera to a direct print compatible printer *1 with a cable and simply pressing the button on the camera. 1. Connect the camera to a direct print compatible printer and turn on the printer's power. *1 Since this camera uses a standard protocol (PictBridge), ...

23 2. Set the camera to the playback mode, turn on the power and confirm that , or is displayed in the upper left of the LCD monitor ( a ). • The button will light blue. • The displayed icon will vary according to the printer model.• will display in the movie mode. 3. Use the or button to select an ...

24 The following methods can be used to download images recorded by the camera to a computer. Some methods, depending on the OS used, may not be available. Please read System Requirements (p. 25) in advance. „ Camera to Computer Connection „ Using a Memory Card Reader A memory card reader can be use...

25 System Requirements Please install the software on a computer meeting the following minimum requirements. „ Windows „ Macintosh OS Windows 2000 Service Pack 4 Windows XP (including Service Pack 1 and Service Pack 2) Windows Vista Computer Model The above OS should be pre-installed on computers wi...

26 Preparing to Download Images „ Items to Prepare • Camera and computer• Canon Digital Camera Solution Disk supplied with the camera• Interface cable supplied with the camera 1. Install the software. 1. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. 2. Click [Easy Inst...

27 2. Connecting the camera to a computer. 1. Connect the supplied interface cable to the computer's USB port and to the camera's DIGITAL terminal. Use the toggle on the wrist strap or slip a fingernail under the edge of the camera's DIGITAL terminal cover, lift up and plug the interface cable in al...

30 Downloading Images Using the Camera (Direct Transfer) Use this method to download images using camera operations.Install the supplied software and adjust the computer settings before using this method for the first time (p. 26) . 1. Confirm that the Direct Transfer menu is displayed on the camera...

Safety Precautions Be sure to read, understand and follow the safety precautions below when using the camera, in order to prevent injury, burns or electrical shock to yourself and others. Be sure to also read the safety precautions listed in the Advanced Camera User Guide . Warnings • Do not trigger...