Canon 6048B001 - Manuals

Part Names and Conventions in This Guide 5 • The tabs shown above titles indicate whether the function is used for still images, movies, or both. : Indicates that the function is used when shooting or viewing still images. : Indicates that the function is used when shooting or viewing movies. • The ...

6 Package Contents .............................2Compatible Memory Cards ................3Part Names and Conventions in This Guide .......................................4 Contents ............................................6Contents: Basic Operations ...............8Safety Precautions................

8 4 Shoot z Use camera-determined settings (Auto Mode) ............................. 46 z Focus on faces ............................................................... 46, 76, 108 z Without using the flash (Flash Off) ............................................... 57 z With myself in the shot (Sel...

Contents: Basic Operations 9 1 View z View images (Playback Mode) ................................................... 122 z Automatic playback (Slideshow)................................................. 132 z On a TV .....................................................................................

10 • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be ...

Safety Precautions 11 • Use only the recommended battery. • Do not place the battery near or in direct flame. • Unplug the power cord periodically, and using a dry cloth, wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area. • Do not ...

14 The camera’s touch-screen panel enables intuitive operation simply by touching or tapping the screen. Touch the screen briefly with your finger. z This gesture is used to shoot, configure camera functions, and so on. Touch the screen and move your finger across it. z This gesture is used in Playb...

15 Prepare for shooting as follows. Attach the strap. z Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ). z Place the strap around your wrist. z When shooting, hold the camera securely to prevent it from moving....

Initial Preparations 16 Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. Remove the cover. Insert the battery. z After aligning the S marks on the battery and charger, insert the battery by pus...

Initial Preparations 18 Insert the included battery and a memory card (sold separately).Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (p. 153). Open the battery cover. z Slide the cover ( ) and open it ( )....

Initial Preparations 19 Insert the memory card. z Insert the memory card facing as shown until it clicks into the locked position. z Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera. Close the memory card cover. z...

Initial Preparations 21 Remove the battery. z Open the cover and press the battery lock in the direction of the arrow. X The battery will pop up. Remove the memory card. z Push the memory card in until it clicks, and then slowly release it. X The memory card will pop up. A screen for setting the dat...

Initial Preparations 22 Adjust the date and time as follows. Access the camera menu. z Touch H , and then touch n . Choose [Date/Time]. z Touch the 3 tab. z Drag up or down across the screen to choose [Date/Time]. z Touch [Date/Time]. Change the date and time. z Follow step 2 on p. 21 to adjust the ...

Initial Preparations 23 The display language can be changed as needed. Enter Playback mode. z Press the 1 button. Access the setting screen. z Touch and hold n until the setting screen is displayed. Set the display language. z Touch a display language to choose it, and then touch ^ . X Once the disp...

24 Follow these instructions to turn the camera on, shoot still images or movies, and then view them. For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. z Press the power button. X The st...

Trying the Camera Out 25 z Aim the camera at the subject. As the camera determines the scene, it will make a slight clicking noise. X A scene icon is displayed in the upper left of the screen and an image stabilization icon in the upper right. X Frames displayed around any subjects that are detected...

Trying the Camera Out 26 Shoot. z Press the shutter button all the way down. z As the camera shoots, a shutter sound is played, and in low-light conditions, the flash fires automatically. z Keep the camera still until the shutter sound ends. X Your shot remains displayed on the screen for about two ...

Trying the Camera Out 27 After shooting images or movies, you can view them on the screen as follows. Enter Playback mode. z Press the 1 button. X Your last shot is displayed. Browse through your images. z To view the next image, drag right to left across the screen, and to view the previous image, ...

Trying the Camera Out 28 You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. Choose an image to erase. z Drag left or right across the screen to choose an image. Erase the image. z Touch H , drag up or down on the screen, and then to...

29 The software and PDF manuals on the included CD-ROM are introduced below, with instructions for installation, saving images to a computer, and using the PDF manuals. After installing the software on the CD-ROM, you can do the following things on your computer. ImageBrowser EX z Import images and ...

Included Software, PDF Manuals 30 The included software can be used on the following computers. Adobe Reader is required to view the PDF manuals. Windows * In Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer per...

Included Software, PDF Manuals 31 Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.Using the software auto update function, you can update to the latest version and download new functions via the Internet (some software excluded), so be sure to install the software on a compute...

Included Software, PDF Manuals 32 z With the camera turned off, open the cover ( ). With the smaller plug of the included interface cable (p. 2) in the orientation shown, insert the plug fully into the camera terminal ( ). z Insert the larger plug of the interface cable in the computer’s USB port. F...

Included Software, PDF Manuals 33 Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Connect the camera to the computer. z Follow step 3 on p. 31 to connect the camera to a computer. Turn the camera on to access CameraWindow. z Press the 1 button to turn the camera on. z On a Ma...

Included Software, PDF Manuals 34 z Choose [Downloads Images From Canon Camera using Canon CameraWindow] and then click [OK]. z Double click . Save the images to the computer. z Click [Import Images from Camera], and then click [Import Untransferred Images]. X Images are now saved to the Pictures fo...

Included Software, PDF Manuals 35 Use the included CD-ROM to install the PDF manuals, and a shortcut for the camera manual will be created on the desktop. Adobe Reader is required to view the PDF manuals. • In Windows 7, if the screen in step 2 is not displayed, click the icon in the taskbar. • To s...

36 Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories.Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Ca...

37 Camera Basics Basic camera operations and features 1 COP Y

38 Shooting Mode z Press the power button to turn the camera on and prepare for shooting. z To turn the camera off, press the power button again. Playback Mode z Press the 1 button to turn the camera on and view your shots. z To turn the camera off, press the 1 button again. As a way to conserve bat...

39 To ensure your shots are in focus, always press the shutter button lightly (halfway) initially. Once the subject is in focus, press the button all the way down to shoot.In this manual, shutter button operations are described as pressing the button halfway or all the way down . Press halfway. (Pre...

40 Touch l to view other information on the screen, or to hide the information. For details on the information displayed, see p. 196. Shooting Display Options Information is displayed No information is displayed • Screen brightness is automatically increased by the night display function when you ar...

41 Configure commonly used functions through the FUNC. menu as follows.Note that menu items and options vary depending on the shooting mode (pp. 202 – 203) or playback mode (p. 207). Access the FUNC. menu. z Touch H . Choose a menu item. z Drag the menu up or down to scroll it, or touch an item to c...

42 Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting ( 4 ), playback ( 1 ), and so on. Note that available settings vary depending on the selected shooting or playback mode (pp. 204 – 207). Access the menu. z Touch H ,...

Indicator Display 43 Choose an option. z For options displayed with qr on either side, touch qr to change the option. z For options displayed with a bar to indicate the level, touch the desired position on the bar. Finish the setup process. z Touch ^ to return to the screen displayed before you touc...

45 Smart Auto Mode Convenient mode for easy shots with greater control over shooting 2 COP Y

46 For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on. z Press the power button. X The startup screen is displayed. Enter Auto mode. z Touch , touch qr or quickly drag left or right on the scr...

Shooting in Smart Auto Mode 48 Shooting Movies Start shooting. z Touch . The camera beeps once as recording begins, and [ Rec] is displayed with the elapsed time. X The camera switches to full-screen display, and the portion of your subject shown on the screen is recorded. X Frames displayed around ...

Shooting in Smart Auto Mode 49 Still Images • A flashing icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still. • If your shots are dark despite the flash firing, move closer to the subject. For detail...

Shooting in Smart Auto Mode 50 In A mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color. Depending on the scene, continuous images may be shot (p. 51). * Tripod U...

Shooting in Smart Auto Mode 51 • The background color of , , , , and is dark blue, and the background color of is orange. • When shooting movies, only People, Other Subjects, and At Close Range icons will be displayed. • When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babie...

Shooting in Smart Auto Mode 52 Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in A mode. * Displayed when you pan, following moving subjects with the camera. When you follow subjects moving horizontal...

53 When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 48x enlargement. When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 20x enlargement. Move the zoom lever toward i . z Hold the lever u...

Common, Convenient Features 54 With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button. Configure the setting. z Touch H , choose in the menu, and then choose ] (p. 41). X Once the setting is comple...

Common, Convenient Features 55 This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot. Configure the setting. z Follow step 1 on p. 54 and choose [ . X Onc...

Common, Convenient Features 56 With this option, you can simply touch the screen and release your finger to shoot. The camera will focus on subjects and adjust image brightness automatically. Prepare to use touch shutter. z Touch and change the mode to . Choose the subject to focus on. z Touch the s...

Common, Convenient Features 58 The camera can add the shooting date and time to images in the lower-right corner. However, note that these cannot be removed. Confirm beforehand that the date and time are correct (p. 21). Configure the setting. z Touch H , touch n , choose [Date Stamp] on the 4 tab, ...

59 If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In A mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting.This functi...

Using Face ID 60 Register face information. z Aim the camera so that the face of the person you want to register is inside the gray frame at the center of the screen. z A white frame on the person’s face indicates that the face is recognized. Make sure a white frame is displayed on the face, and the...

Using Face ID 61 Save the settings. z Touch [Save]. z After a message is displayed, touch [Yes]. Continue registering face information. z To register up to 4 more points of face information (expressions or angles), repeat steps 2 – 3. z Registered faces are more easily recognized if you add a variet...

Using Face ID 62 If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting. X When you point the camera toward a subject, the names of up to 3 registered people will be displayed when th...

Using Face ID 63 Access the [Check/Edit Info] screen. z Following step 1 on p. 59, touch [Check/Edit Info]. Choose a person to check. z Touch the image of the person you want to check. Check the registered information. z Touch the item you want to check. z Check the registered information. Access th...

Using Face ID 64 You can overwrite existing face information with new face info. You should update face information regularly, especially with babies and children, as their faces change quickly as they grow.You can also add face information when all 5 face info slots have not been filled. Access the...

Using Face ID 65 Register face information. z Follow steps 2 – 3 on p. 60 to shoot, and then register the new face information. z Registered faces are more easily recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and sh...

Using Face ID 66 You can erase information (face info, name, birthday) registered to Face ID. However, names recorded in previously shot images will not be erased. Access the [Erase Info] screen. z Follow step 1 on p. 59 and choose [Erase Info]. Choose the name of the person whose info you want to e...

67 Change the image aspect ratio (ratio of width to height) as follows. Configure the setting. z Touch H , choose in the menu, and choose the desired option (p. 41). X Once the setting is complete, the screen aspect ratio will be updated. z To restore the original setting, repeat this process but ch...

Image Customization Features 69 Configure the setting. z Choose [Red-Eye Corr.], and then choose [On] (p. 42). X Once the setting is complete, R is displayed. z To restore the original setting, repeat this process but choose [Off]. In shots of evening scenes with subjects illuminated by mercury lamp...

Image Customization Features 70 3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Specifications” in the Getting Started guide. Configure the setting. z Touch H , choose in the menu, and choose the d...

71 Grid lines can be displayed on the screen for vertical and horizontal reference while shooting. Configure the setting. z Touch H , touch n , choose [Grid Lines] on the 4 tab, and then choose [On] (p. 42). X Once the setting is complete, grid lines are displayed on the screen. z To restore the ori...

Helpful Shooting Features 72 is displayed when the camera detects that people may have closed their eyes. Choose . z Touch H , choose in the menu, and then choose (p. 41). Configure the setting. z Touch H , touch n , choose [Blink Detection] on the 4 tab, and then choose [On] (p. 42). Shoot. X A fra...

73 Customize shooting functions on the 4 tab of the menu as follows. For instructions on menu functions, see “ n Menu” (p. 42). You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions. Configure the setting. z Touch H , ...

75 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions 3 COP Y

76 Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. Enter 4 mode. z Set the mode switch to 4 . Choose a shooting mode. z Touch . z Touch G . z To view other shooting modes, touch qr , or quickly drag left or right on the screen. z...

Specific Scenes 77 Shoot evening scenes without using a tripod (Handheld NightScene) z Beautiful shots of evening scenes, created by combining consecutive shots to reduce camera shake and image noise. z When using a tripod, shoot in A mode (p. 46). Shoot under low light (Low Light) z Shoot with mini...

79 Add a variety of effects to images when shooting. Choose a shooting mode. z Follow steps 1 – 2 on p. 76 to choose a shooting mode. Shoot. Shoot in vivid colors (Super Vivid) z Shots in rich, vivid colors. Posterized shots (Poster Effect) z Shots that resemble an old poster or illustration. Applyi...

Applying Special Effects 80 Shoot with the distorting effect of a fish-eye lens. Choose . z Follow steps 1 – 2 on p. 76 and choose . Choose an effect level. z Touch , touch qr to choose an effect level, and then touch ^ . X A preview is shown of how your shot will look with the effect applied. Shoot...

Applying Special Effects 81 For movies, choose the movie playback speed. z Touch , touch , , or to choose the speed, and then touch ^ . Shoot. Playback Speed and Estimated Playback Time (for One-Minute Clips) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. • The zoom is not availab...

Applying Special Effects 82 This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color. Choose . z Follow steps 1 – 2 on p. 76 and choose . Choose a color tone. z Touch , touch qr to choose a color tone, and then touch ^ . X...

Applying Special Effects 83 Shoot images in black and white, sepia, or blue and white. Choose . z Follow steps 1 – 2 on p. 76 and choose . Choose a color tone. z Touch , touch qr to choose a color tone, and then touch ^ . X A preview is shown of how your shot will look with the effect applied. Shoot...

Applying Special Effects 84 Choose a single image color to keep and change other colors to black and white. Choose T . z Follow steps 1 – 2 on p. 76 and choose T . Access the setting screen. z Touch . X The original image and the Color Accent image are displayed one after another. X By default, gree...

Applying Special Effects 85 You can replace one image color with another before shooting. Note that only one color can be replaced. Choose Y . z Follow steps 1 – 2 on p. 76 and choose Y . Access the setting screen. z Touch . X The original image and the Color Swap image are displayed one after anoth...

Special Modes for Other Purposes 86 You can make a short movie of a day just by shooting still images.Before each shot, the camera will automatically record a movie clip of the scene. Each clip recorded that day is combined into a single file. Choose . z Follow steps 1 – 2 on p. 76 and choose . Shoo...

Special Modes for Other Purposes 88 The camera shoots automatically after detecting a smile, even without you pressing the shutter button. Choose . z Follow steps 1 – 2 on p. 76 and choose , and then touch . z Touch to choose it, and then touch ^ . Aim the camera at a person. z Each time the camera ...

Special Modes for Other Purposes 89 Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected. Choose . z Follow steps 1 – 2 on p. 76 and choose , and then touch . z Touch to choose it, and then touch ^ . Compose the sh...

Special Modes for Other Purposes 90 The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area (p. 108). This is useful when including yourself in group photos or similar shots. Choose . z Follow steps 1 – 2 on p. ...

Special Modes for Other Purposes 91 Join the subjects in the shooting area and look at the camera. X After the camera detects a new face, the lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot. z To cance...

Special Modes for Other Purposes 92 You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Specifications” in the Getting Started guide. Choose . z Follow steps 1 – 2 on p. 76 and choose . Shoot. X Hold t...

Special Modes for Other Purposes 93 Each set of images shot continuously is managed as a single group, and only the first image in that group will be displayed. To indicate that the image is part of a group, is displayed. Images Displayed During Playback • If you erase a grouped image (p. 136), all ...

94 You can shoot fast-moving subjects for playback later in slow motion.Note that sound is not recorded. Choose . z Follow steps 1 – 2 on p. 76 and choose . Choose a frame rate. z Touch H , choose in the menu, and choose the desired frame rate (p. 41). X The option you configured is now displayed. S...

Shooting Various Movies 95 Shoot movies that can be edited with iFrame-compatible software or devices. You can quickly edit, save, and manage iFrame movies using the included software. Choose . z Follow steps 1 – 2 on p. 76 and choose . Shoot. z Touch . z To stop movie recording, touch . Shooting iF...

97 G mode • Instructions in this chapter apply to the camera in G mode (p. 98). • G : Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than G , make sure the function is available in that mode (pp. 200 – 205). More discerning shots, in your preferred ...

98 You can customize many function settings to suit your preferred shooting style. Enter G mode. z Follow steps 1 – 2 on p. 76 and choose G . Customize the settings as desired (pp. 99 – 119), and then shoot. Shooting in Program AE Mode ( G Mode) Still Images Movies • If adequate exposure cannot be o...

99 The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2. z Touch # and adjust brightness by touching the desired position on the bar or dragging the bar left or right (p. 41). X The correction level you specified is now displayed. Before shooting, yo...

Image Brightness (Exposure Compensation) 100 Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. z Touch H , choose in the menu, and choose the desired option (p. 41). X The option you configured is now displayed. z Touch H , choose in the menu, and choose...

102 By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. z Touch H , choose in the menu, and choose the desired option (p. 41). X The option you configured is now displayed. For image colors that look natural under the light in your shot, adjus...

Color and Continuous Shooting 105 * In t mode (p. 77) or AF lock (p. 113), is changed to . Mode Description Continuous Continuous shooting, with the focus and exposure determined when you press the shutter button halfway. Continuous Shooting AF Continuous shooting and focusing.[AF Frame] is set to [...

106 To restrict the focus to subjects at close range, set the camera to e . For details on the focusing range, see “Specifications” in the Getting Started guide. z Touch H , choose in the menu, and then choose e (p. 41). X Once the setting is complete, e is displayed. To restrict the focus to distan...

Shooting Range and Focusing 107 The focal length of the lens can be increased by approximately 1.4x or 2.3x. The focal length of the lens can be increased by approximately 1.6x or 2.0x. This can reduce camera shake because the shutter speed is faster than it would be if you zoomed (including using d...

Shooting Range and Focusing 108 Change the AF (auto focus) frame mode to suit the shooting conditions as follows. z Touch H , touch n , choose [AF Frame] on the 4 tab, and then choose the desired option (p. 42). • Detects people’s faces, and then sets the focus, exposure (evaluative metering only), ...

Shooting Range and Focusing 109 One AF frame is displayed. Effective for reliable focusing. • If faces are not detected, or when only gray frames are displayed (without a white frame), an AF frame is displayed in the center of the screen when you press the shutter button halfway. • If faces are not ...

Shooting Range and Focusing 110 As long as you keep the shutter button pressed halfway, the focus and exposure are locked. You can recompose shots as needed before shooting. This feature is called Focus Lock. Focus. z Aim the camera so that the subject is centered, and then press the shutter button ...

Shooting Range and Focusing 111 You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway. z Touch H , touch n , choose [Continuous ...

Shooting Range and Focusing 112 You can shoot after the camera focuses on your selected subject, person’s face, or location shown on the screen. Choose a subject, a person’s face, or a location to focus on. z Touch the subject or person on the screen. X When the AF frame mode is set to [Face Detect]...

114 You can have the flash fire for each shot. For details on the flash range, see “Flash Range” (see “Specifications” in the Getting Started guide). z Touch , touch h to choose it, and then touch h again. X Once the setting is complete, h is displayed. With this option, the flash fires to increase ...

Flash 115 Just as with the AE lock (p. 99), you can lock the exposure for the flash shots. Set the flash to h (p. 114). Lock the flash exposure. z Aim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, touch the bottom of the screen (in the frame sh...

116 Add icons to the shooting screen or rearrange them as desired. Access the setting screen. z On the shooting screen, touch and hold one of the icons. X The screen at left is displayed. Add an icon. z Drag an icon from the center of the screen in step 1 to the desired position for display. z An or...

Other Settings 117 z On the setting screen in step 1 on p. 116, drag an icon to the desired position to rearrange the layout. X If another icon is already in that position, it will be replaced by the icon you dragged. z Drag the unwanted icon from the setting screen in step 1 on p. 116 to the center...

Other Settings 120 Powered IS reduces slow camera shake that may occur when recording telephoto movies. However, this option may not produce the expected results when used for the stronger camera shake that may occur when shooting while walking or when moving the camera to match subject movement. In...

121 Playback Mode • To prepare the camera for these operations, press the 1 button to enter Playback mode. Have fun reviewing your shots, and browse or edit them in many ways • It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other ...

Viewing 123 Play movies. z Touch to start playback. Adjust the volume. z Scroll up or down to adjust the volume. Pause playback. z To pause playback, touch the screen. The movie control panel is displayed. To resume playback, touch . X After the movie is finished, is displayed. To switch images duri...

Viewing 124 Tilt the camera while browsing images. z To browse through images quickly while touching and holding q on the left edge of the screen (p. 122), tilt the camera as shown as you browse images. Tilt the camera in the opposite direction while holding r . Images appear grainy at this time. If...

Viewing 125 Touch l to view other information on the screen, or to hide the information. For details on the information displayed, see p. 198. *Not shown for movies. Washed-out highlights in the image flash on the screen in detailed information display. z The graph in detailed information display is...

Viewing 126 To check the focus of your shots, you can magnify the area of the image that was in the AF frame at the time of shooting. Access Focus Check. z Touch l (p. 125). X A white frame is displayed where the AF frame was when the focus was set. X Gray frames are displayed over faces detected la...

127 By displaying multiple images in an index, you can quickly find the images you are looking for. Display images in an index. z Move the zoom lever toward g to display images in an index. Moving the lever again will increase the number of images shown. z To display fewer images, move the zoom leve...

Browsing and Filtering Images 128 Choose a search condition. z Touch H , choose in the menu, and then choose a condition (p. 41). View the image search results. z Choose the type of image to view by touching an option, and then touch it again. (Except when searching images by .) X Images matching th...

Browsing and Filtering Images 129 Grouped images shot in mode (p. 92) are generally displayed together, but they can also be viewed individually. Choose an image group. z Browse images by dragging left or right until you find a desired image labeled . Touch . View individual images in the group. z D...

130 If you notice that a name is incorrect during playback, you can change it or erase it.However, you cannot add names for people who are not detected by Face ID (names are not displayed), and for people whose names have been erased. Access the setting screen. z Touch H , touch n , and choose [Face...

131 Magnify an image. z Touching the screen will zoom in and magnify the image, and and are displayed. z You can magnify images up to about 10x, centered around where you touch, by touching repeatedly. z You can also zoom in or out by touching or . To zoom in or out continuously, touch and hold or ....

Image Viewing Options 132 Automatically play back images from a memory card as follows. Each image is displayed for about three seconds. Choose a slideshow transition and start playback. z Touch H , choose . in the menu, and choose the desired option (p. 41). z The slideshow will start a few seconds...

Image Viewing Options 133 Based on the current image, the camera offers four images similar to it that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after y...

134 Protect important images to prevent accidental erasure by the camera (p. 136). z Touch H and choose : in the menu (p. 41). [Protected] is displayed. z To cancel protection, repeat this process and touch : again to choose it. Access the setting screen. z Touch H , touch n , and choose [Protect] o...

Protecting Images 135 Choose [Select]. z Following step 2 on p. 134, touch [Select]. Choose an image. z Choose an image after dragging left or right to browse. Once you touch the screen, is displayed. z To cancel protection, touch the screen again. is no longer displayed. z Repeat this process to sp...

136 You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. Choose an image to erase. z Drag left or right across the screen to choose an image. Erase the image. z Touch H and choose a in the menu (p. 41). z After [Erase?] is displayed, ...

138 Change the orientation of images and save them as follows. Choose \ . z Touch H and choose \ in the menu (p. 41). Rotate the image. z Touch or , depending on the desired direction. Each time you touch, the image is rotated 90°. Touch ^ to complete the setting. Follow these steps to deactivate au...

139 You can tag images as favorites and assign them to My Category (p. 140). By choosing a category in image search, you can restrict the following operations to all of those images. • Viewing (p. 122), Viewing Slideshows (p. 132), Protecting Images (p. 134), Erasing Images (p. 136), Adding Images t...

Image Categories 140 You can organize images into categories. Note that images are automatically categorized at the time of shooting, according to shooting conditions. : Images with detected faces, or images shot in I or mode. : Images detected as , , or in A mode, or images shot in mode. : Images s...

Convenient Control: Touch Actions 141 You can quickly and easily activate functions that you have assigned to four touch gestures (Touch Actions), in single-image display. z Drag across the screen as shown. X The function assigned to is now activated. z Similarly, you can also activate functions ass...

Convenient Control: Touch Actions 142 Simplify your preferred camera operations by reassigning dragging patterns to them as desired. Access the setting screen. z Touch H , touch n , and choose [Set Touch Actions] on the 1 tab (p. 42). Assign a function to a dragging pattern. z Drag up or down across...

143 Save a copy of images at a lower resolution. Choose [Resize]. z Touch H , touch n , and choose [Resize] on the 1 tab (p. 42). Choose an image. z Choose an image after dragging left or right to browse. Touch [OK]. Choose an image size. z Touch , , or , and then touch [OK]. X [Save new image?] is ...

Editing Still Images 144 You can specify a portion of an image to save as a separate image file. Choose [Trimming]. z Touch H , touch n , and choose [Trimming] on the 1 tab (p. 42). Choose an image. z Choose an image after dragging left or right to browse. Touch [OK]. Adjust the cropping area. X A f...

Editing Still Images 145 You can adjust image colors and then save the edited image as a separate file. For details on each option, see p. 103. Choose [My Colors]. z Touch H , touch n , and choose [My Colors] on the 1 tab (p. 42). Choose an image. z Choose an image after dragging left or right to br...

Editing Still Images 147 Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. Choose [Red-Eye Correction]. z Touch H , touch n , and choose [Red-Eye Correction] on the 1 tab (p. 42). Choose an image. z Choose an image after dragging left or right to...

148 You can cut movies to remove unneeded portions at the beginning or end. Specify portions to cut. z Touch the screen during movie playback to access the movie control panel. z Touch , , or the scroll bar to display the trimming point. X changes to to indicate that you can trim from the current fr...

149 Setting Menu Customize or adjust basic camera functions for greater convenience 6 COP Y

150 Functions can be configured on the 3 tab. Customize commonly used functions as desired, for greater convenience (p. 42). Silence camera sounds and movies as follows. z Choose [Mute], and then choose [On]. Adjust the volume of individual camera sounds as follows. z Touch [Volume]. z Drag up or do...

Adjusting Basic Camera Functions 151 Display of hints and tips for camera functions can be deactivated, but menu (p. 42) explanations will still be displayed. z Choose [Hints & Tips], and then choose [Off]. Adjust screen brightness as follows. z Choose [LCD Brightness], and then touch the desire...

Adjusting Basic Camera Functions 152 Access the [Start-up Image] screen in Playback mode. z Press the 1 button. z Touch [Start-up Image]. z Touch [2], and then touch . Choose one of your shots. z Choose an image and touch [OK]. After [Register?] is displayed, touch [OK]. z Choose [Color Option], and...

Adjusting Basic Camera Functions 153 Before using a new memory card or a card formatted in another device, you should format the card with this camera.Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. An...

Adjusting Basic Camera Functions 154 Perform low-level formatting in these cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a m...

Adjusting Basic Camera Functions 155 Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day. z Choose [Create Folder], and then choose [Daily]. X Images will now be saved in folders created on the shooting date....

Adjusting Basic Camera Functions 156 Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (p. 38). Access the [Power Saving] screen. z Touch [Power Saving]. Configure the setting. z After choosing an item, touch qr to adjust it as ne...

Adjusting Basic Camera Functions 157 Specify your destination. z Touch [ World], and then touch [Time Zone]. z Touch qr to choose the destination time zone. z If necessary, specify daylight saving time as in step 1. z Touch ^ . Switch to the destination time zone. z Touch [ World], and then touch ^ ...

Adjusting Basic Camera Functions 158 Calibrate the touch-screen panel if you are having difficulty choosing items or buttons by touch. For greater calibration accuracy, always use the stylus attached to the strap. z Touch [Calibration]. z Use the stylus attached to the strap to touch the screen wher...

Adjusting Basic Camera Functions 159 Change the display language as needed. Access the Language screen. z Touch [Language ]. Configure the setting. z Touch a display language to choose it, and then touch ^ . The following settings can also be adjusted on the 3 tab. • [Video System] (p. 165) • [Ctrl ...

Adjusting Basic Camera Functions 160 Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body. z Touch [Certification Logo Display]. • The following functions are not r...

162 • Charge the battery on (or immediately before) the day of use Charged batteries gradually lose their charge, even when they are not used. You can easily check the charge state of the battery by attaching the cover so that S is visible on a charged battery, and attaching it so that S is not visi...

163 The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Battery Pack NB-9L z Rechargeable lithium-ion battery Battery Charger CB-2LB/CB-2LBE z Charger for Battery Pack NB-9L Battery Pack NB-11L z Rechargeable l...

Optional Accessories 164 High-Power Flash HF-DC2 z External flash for illuminating subjects that are out of range of the built-in flash. High-Power Flash HF-DC1 can also be used. Stereo AV Cable AVC-DC400ST z Connect the camera to a TV to enjoy playback on the larger TV screen. HDMI Cable HTC-100 z ...

165 By connecting the camera to a TV, you can view your shots on the larger screen of the TV.For details on connection or how to switch inputs, refer to the TV manual. Connecting the camera to an HDTV with the HDMI Cable HTC-100 (sold separately) enables you to view your shots on the larger screen o...

Using Optional Accessories 167 Display images. z Turn on the TV. On the camera, press the 1 button. X Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.) Control the camera with the TV remote. z Press the qr buttons on the remote to browse images. z To di...

Using Optional Accessories 168 Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST (sold separately) enables you to view your shots on the larger screen of the TV as you control the camera. Make sure the camera and TV are off. Connect the camera to the TV. z On the TV, insert the cabl...

Using Optional Accessories 169 Powering the camera with AC Adapter Kit ACK-DC70 (sold separately) eliminates the need to monitor the remaining battery level. Make sure the camera is off. Insert the coupler. z Follow step 1 on p. 18 to open the cover. z Insert the coupler facing the direction shown, ...

Using Optional Accessories 170 Powering the camera with AC Adapter Kit ACK-DC90 (sold separately) eliminates the need to monitor the remaining battery level. Make sure the camera is off. Open the cover. z Follow step 2 on p. 20 to open the memory card/battery cover. z Open the coupler cable port as ...

Using Optional Accessories 171 Connect the power cord. z Insert the adapter plug into the end of the coupler cable. z Insert one end of the power cord into the compact power adapter, and then plug the other end into a power outlet. z Turn the camera on and use it as desired. z When finished, turn th...

172 Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare or print images for photobooks.A Canon SELPHY CP series compact photo printer is used here for the sa...

Printing Images 173 Turn the camera on. z Press the 1 button to turn the camera on. Choose an image. z Browse images by dragging left or right, and then touch an image to choose it. Access the printing screen. z Touch H , and then touch c . Print the image. z Touch [Print]. X Printing now begins. z ...

Printing Images 174 Access the printing screen. z Follow steps 1 – 6 on pp. 172 – 173 to access the screen at left. Configure the settings. z Touch an item, and then touch qr to choose an option. Configuring Print Settings Still Images – No. of Copies Choose the number of copies to print. Default Ma...

Printing Images 175 By cropping images before printing, you can print a desired image area instead of the entire image. Choose [Trimming]. z After following step 1 on p. 174 to access the printing screen, touch [Trimming]. X A cropping frame is now displayed, indicating the image area to print. Adju...

Printing Images 176 Choose a type of paper. z Touch an option to choose it, and then touch [Next]. Choose a layout. z Drag up or down to choose an option. z When choosing [N-up], touch qr to specify the number of images per sheet. z Touch [OK]. Print the image. Choose [ID Photo]. z Following steps 1...

Printing Images 177 Choose the printing area. z Follow step 2 in “Cropping Images Before Printing (Trimming)” (p. 175) to choose the printing area. Print the image. Access the printing screen. z Follow steps 1 – 6 on pp. 172 – 173 to choose a movie. The screen at left is displayed. Choose a printing...

Printing Images 178 Batch printing (p. 181) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform...

Printing Images 179 Specify the printing format, whether to add the date or file number, and other settings as follows. These settings apply to all images in the print list. z Touch H , touch n , and choose [Print Settings] on the 2 tab. Choose and configure settings as desired (p. 42). Configuring ...

Printing Images 180 Choose [Select Images & Qty.]. z Touch H , touch n , and then touch [Select Images & Qty.] on the 2 tab to choose it. Choose an image. z Drag left or right across the screen to choose an image. X You can now specify the number of copies. z To specify index printing for th...

Printing Images 181 Choose [Select All Images]. z Following step 1 on p. 180, touch [Select All Images] to choose it. Configure the print settings. z Touch [OK]. Choose [Clear All Selections]. z Following step 1 on p. 180, touch [Clear All Selections] to choose it. Confirm clearing the print list. z...

Printing Images 182 Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the included software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with y...

Printing Images 183 Choose an image. z Drag left or right to browse images, and then touch an image to choose it. X is displayed. z To remove the image from the photobook, touch the screen again. is no longer displayed. z Repeat this process to specify other images. z When finished, touch [OK] to re...

Using an Eye-Fi Card 185 Check the access point SSID used by the Eye-Fi card or the connection status, as needed. z Touch H , touch n , and then touch [Eye-Fi Settings] on the 3 tab to choose it. z Touch [Connection info]. X The connection information screen is displayed. Configure the setting as fo...

187 Appendix Helpful information when using the camera 8 COP Y

188 If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power Nothing happens when the power button is pressed. • Confirm that you are using the correct type of battery, and that there i...

Troubleshooting 191 Playback Playback is not possible. • Image or movie playback may not be possible if a computer is used to rename files or alter the folder structure. Refer to the ImageBrowser EX User Guide for details on folder structure and file names. Playback stops, or audio skips. • Switch t...

192 If an error message is displayed, respond as follows. No memory card • The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (pp. 19, 20). Memory card locked • The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the locke...

195 • The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. • Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data. • If water droplets or dirt adher...

196 * : Regular orientation, : Held vertically The camera detects the shooting orientation and adjusts settings for optimal shots. Orientation is also detected during playback, and in either orientation, the camera automatically rotates images as needed. However, the orientation may not be detected ...

On-Screen Information 197 An on-screen icon or message indicates the battery charge level. Battery Level Display Details Sufficient charge Slightly depleted, but sufficient (Blinking red) Nearly depleted – charge the battery soon [Change the battery pack.] Depleted – charge the battery immediately C...

200 Functions and Menu Tables Functions Available in Each Shooting Mode Shooting Mode A 4 G Function Exposure Compensation (p. 99) – { { { { { { { Flash (pp. 57, 114) { { { { { { { { – { { { { { { { *2 { { – – – – – { { { { { { { { Touch Shutter (p. 56) On/Off { { { { { – – – AE Lock/FE Lock* 5 (pp....

Functions and Menu Tables 204 4 Shooting Menu Shooting Mode A 4 G Function AF Frame (p. 108) Face Detect* 1 * 3 { { { { { { { { Face AiAF* 2 { { { { { { { { Fixed Frame – { { { – – – – AF Frame Size* 4 (p. 109) Normal – { { { – – – – Small – { { { – – – – Digital Zoom (p. 53) Standard { { – { – { { ...

Functions and Menu Tables 206 * Refer to "Wireless LAN Guide" in the Getting Started guide. 3 Set up Menu Item Ref. Page Item Ref. Page Mute p. 150 Power Saving pp. 38, 156 Volume p. 150 Time Zone p. 156 Sound Options p. 150 Date/Time p. 22 Hints & Tips p. 151 Video System p. 168 LCD Bri...

Functions and Menu Tables 207 2 Print Menu Item Ref. Page Item Ref. Page Print – Clear All Selections p. 181 Select Images & Qty. p. 180 Print Settings p. 179 Select All Images p. 181 Playback Mode FUNC. Menu Item Ref. Page Item Ref. Page Rotate p. 138 Movie Digest Playback p. 128 Print List p. ...

208 A AC adapter kit.......................... 163, 169, 170Accessories ............................................. 163Active Display .......................................... 123AE lock ...................................................... 99AF frames .................................... 25, 47...

212 Trademark Acknowledgments • The microSDXC logo is a trademark of SD-3C, LLC. • The SDXC logo is a trademark of SD-3C, LLC. • This device incorporates exFAT technology licensed from Microsoft. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks o...

Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003. To ensure proper operation of this product, use of genuine Canon accessories is recommended. FCC Notice (Digital Camera, Model PC1735, PC1739 systems)This device complies with Part 15 of the FCC R...

CDD-E463-010 © CANON INC. 2012 Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screensho...