Avaya Remote Access Module 4 - Manuals

Page 2 - Contents

Page 2 User's Guide Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002) Contents Introduction ....................................................................................................................3 Overview ..........................................................................

Page 3 - Introduction; Overview

User's Guide Page 3 38DHB0002UKDS – Issue 2 (09/01/2002) Remote Access Module 4 Introduction Overview The Remote Access Module (IND-RAM4) kit is used to provide remotemaintenance access to INDeX telephone systems. This guide coversinstallation and use with the INDeX telephone system The IND-RAM4 is ...

Page 4 - Security

Page 4 User's Guide Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002) Security The IND-RAM4 is a useful tool. It allows remote diagnostics of faults andoften remote correction without the need for a site visit.However it also allows a direct route into system programming andadministration ...

Page 5 - Installation; Location Requirements; Rack Systems

User's Guide Page 5 38DHB0002UKDS – Issue 2 (09/01/2002) Remote Access Module 4 Installation 1. Location Requirements The Remote Access Module (IND-RAM4) is designed for wall mountingnear the INDeX cabinet containing the CPU Cassette. It requires thefollowing: 1. A switched and fused mains power soc...

Page 6 - Remote Access Module 4 Kit

Page 6 User's Guide Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002) 2. Equipment Supplied & Required Before installing, check that you have all the parts and tools required. Remote Access Module 4 Kit – The Remote Access Module (IND-RAM4).– Internal/External Fax Modem Installation CD...

Page 7 - Attaching the Mounting Brackets

User's Guide Page 7 38DHB0002UKDS – Issue 2 (09/01/2002) Remote Access Module 4 3. Attaching the Mounting Brackets 1. Looking at the base of the IND-RAM4 unit, there are four fixing screws (beneath the four stick-on pads). Note: Do not remove all of these screws at the same time. 2. Remove two of th...

Page 8 - Mounting the Remote Access Module 4

Page 8 User's Guide Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002) 4. Mounting the Remote Access Module 4 1. Hold the IND-RAM4 unit against the wall in its intended position. Using the mounting brackets as a template, mark the position of thefixing hole on each side. These are approxima...

Page 9 - IVM Server Cassette Installation

User's Guide Page 9 38DHB0002UKDS – Issue 2 (09/01/2002) Remote Access Module 4 5. Installing for Use With INDeX IVM/CCM The following paragraphs provide the details for instruction details forinstallation of IND-RAM4 for use with INDeX IVM/CCM. (For details ofNetwork Support Manager and/or KSM Cabl...

Page 10 - IVM/CCM Client Installation

Page 10 User's Guide Remote Access Module 4 38DHB0002UKDS – Issue 2 (09/01/2002) IVM/CCM Client Installation To install the IND-RAM4 on the IVM and INDeX CCM Client perform thefollowing.1. Insert the CD labeled Internal / External Fax Modem Installation in the CD drive of the Client PC. 2. Go to Con...

Page 11 - Restoring INDeX Remote Access Module Defaults

User's Guide Page 11 38DHB0002UKDS – Issue 2 (09/01/2002) Remote Access Module 4 6. Restoring INDeX Remote Access Module Defaults The Remote Access Module is supplied pre-set for operation with anINDeX system at 9600bps. To locally restore the Remote Access Module settings : 1. Using the serial cabl...