Avaya 9335-AV - Manuals

GB 8 Intended Use This apparatus is intended for use on the 2 wire analogue ports of the AVAYA IP OFFICE circuits in all countries except the USA. Because the product is connected behind a PABX it must not be relied upon to contact the emergency services during a power failure. Declaration of Confor...

GB 9 Safety When using your telephone equipment, the following safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. Read and understand all instructions. Follow all warnings and instructions marked on the telephone. This telephone can be haza...

GB 10 Installation Please refer to Figure One at the front of this user guide 25 DC 9V This telephone requires a power supply in order to operate correctly. A suitable power supply is included with the telephone and it should be connected to the socket at the rear of the telephone. 23 Alternatively,...

GB 11 Telephone Features Please refer to Figure One at the front of this user guide 1 The telephone is supplied with a protective cover over the display. Carefully peel this off before using the telephone. The large LCD panel normally shows the time of day and the number of new calls that you have n...

GB 14 Display NEWREPEATCALL# DATE TIME ENVELOPE BATTERY ADAPTOR Numeric Field Alpha-Numeric Field ANSWEREDUNANSWERED TIMERAM / PM Please refer to the drawing above This is the received calls indicator. NEW denotes calls not previously reviewed. REPEAT - indicates multiple calls from the same caller;...

GB 15 This symbol will be displayed when the unit is functioning with batteries. 16 digit field for displaying the telephone number. 16 character alpha numeric display to show caller name or number of new calls and total calls received. Setting the clock Lift Handset, insert the 9V DC Adaptor (suppl...

GB 16 Memory function There are four different memory stores on this telephone. All of the memory locations will accept 32 digits and 16 alpha characters. Directory You can store up to 100 telephone numbers and names in your personal directory. By accessing a memory, a call can be made by pressing t...

GB 17 Dialling a Directory memory To dial a Directory memory; Press You can then scroll through the complete directory by using the ▲ and ▼ buttons. Each memory will appear in alphabetical order. Alternatively, you can search for a particular letter by pressing , followed by the alpha key for which ...

GB 18 Programming Direct Access memory buttons To store a Direct Access memory; Press the button. “STORE” will appear on the display. Press one of the Direct Access memory buttons 11 , where you wish the memory to be stored. NOTE: if the button is pressed once the memory will be stored under the but...

GB 19 Dialling Direct Access memory buttons Pressing any of the Direct Access buttons 11 once or twice will automatically display the number stored. If the Handsfree has been programmed into the memory then pressing the memory button will automatically dial the number. If the number is displayed bec...

GB 22 Viewing the Redial memories Press the button. The last number called on the telephone will be displayed with the telephone number and the message REDIAL 1. Using the ▲ and ▼ buttons you can review the last five numbers called. To call any of the numbers, make sure that the entry required is on...