Avaya 7960 - Manuals - manualsarea.com

Page 2 - Figure 1; profiles the network

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 2 of 35 Cisco7960SIP.doc 1. Introduction 1.1. Background With the introduction of the SIP protocol standard that supports telephony as well as a wide range of other communic...

Page 4 - Equipment and Software Validated

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 4 of 35 Cisco7960SIP.doc 2. Equipment and Software Validated The following equipment and software were used in the configuration shown in Table 2 . Be sure to use the softwa...

Page 5 - Table 3: SIPPING-19 Telephony Feature Support; FEA TU R E; Table 4: Outboard Proxy SIP Telephony Features Beyond SIPPING-19

N o. FEA TU R E C O M M EN TS 1 C all H old Y E S Y E S 2 Consultation Hold Y E S Y E S 3 M usic On H old NO N O A va ilable in OPS (futur e r elease) 4 U nattended Transfer Y E S Y E S 5 Attended Transfer Y E S Y E S 6 Transfer - IM NO N O 7 Call Forward Unconditional Y E S Y E S 8 Call Forward Bus...

Page 6 - Configuring for the Basic Feature Set; Administer Users on the Avaya Converged Communications; Steps; admin

3.2. Message Waiting Indicator (MWI) With the Outboard Proxy SIP extended feature set, a SIP telephone that supports IETF RFC 3265 and MWI Draft 4 (Subscribe/Notify method) will illuminate/extinguish its MWI lamp when voice messages are left/read for that extension. Since the Cisco 7940/7960 SIP pho...

Page 7 - link on the left side of the page and click on; Add

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 7 of 35 Cisco7960SIP.doc Steps Description 2. The Converged Communications Server administration web interface will be displayed. Expand the Users link on the left side of t...

Page 8 - Add User

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 8 of 35 Cisco7960SIP.doc Steps Description 3. The Add User page will be displayed. Fill in the required fields (indicated by *). In the screen below, the user corresponding ...

Page 9 - The confirmation page will be displayed. Click; Continue; Repeat Steps 2-4 for each user to be supported.; Update; on the left side of the page. This

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 9 of 35 Cisco7960SIP.doc Steps Description 4. The confirmation page will be displayed. Click Continue . Repeat Steps 2-4 for each user to be supported. 5. To apply the admin...

Page 10 - SIP

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 10 of 35 Cisco7960SIP.doc 4.2. Configure the Cisco 7940/7960 SIP Telephone Cisco 7940/7960 SIP telephones can be configured using two methods: 1. Configuration files downloa...

Page 11 - ObjectNameX; Avaya Converged; User Administration

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 11 of 35 Cisco7960SIP.doc Steps Description 1. Edit the default and phone-specific configuration file(s). The table below shows the relationship between the parameters that ...

Page 12 - Unregistered

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 12 of 35 Cisco7960SIP.doc Steps Description 2. Reboot the phone. If TFTP support has been properly configured, the phone will download the default and specific configuration...

Page 15 - Configuring for the Extended Feature Set; and Communication Manager off-PBX station mapping.; Configure Avaya Communication Manager; Use the; display system-parameters customer-options; command to verify that

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 15 of 35 Cisco7960SIP.doc 5. Configuring for the Extended Feature Set In addition to the steps outlined in Section 4, the following additional administration steps are requi...

Page 16 - Table 3; also be specified for each feature. Use the; change dialplan analysis; command to specify the

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 16 of 35 Cisco7960SIP.doc (NOTE: You must logoff & login to effect the permission changes.) 5.1.2. Define Outboard Proxy SIP Feature Access Codes (FACs) In order to defi...

Page 18 - Now the FNEs can be defined using the

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 18 of 35 Cisco7960SIP.doc 5.1.3. Define Feature Name Extensions (FNEs) Now the FNEs can be defined using the change off-pbx-telephone feature-name-extensions command. It is ...

Page 19 - Station Type

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 19 of 35 Cisco7960SIP.doc 5.1.5. Add stations Use the add-station command to add a station for each SIP phone to be supported. Use 4620 for the Station Type and be sure to i...

Page 20 - Table 5; Appearance Select requires

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 20 of 35 Cisco7960SIP.doc For most applications, the default values can be used for Page 2. add station 24071 Page 2 of 4 STATION FEATURE OPTIONS LWC Reception: spe Auto Sel...

Page 21 - Station Button Required

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 21 of 35 Cisco7960SIP.doc Off-PBX Station Feature Name Extension (FNE) Station Button Required Active Appearance Select call-appr, brdg-appr, or abrdg-appr Automatic Call-Ba...

Page 22 - Configure the Avaya Converged Communications Server; host; Hosts; link, the SIP contact must be specified; Media Servers; identical to that dialed by the user. Otherwise

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 22 of 35 Cisco7960SIP.doc 5.2. Configure the Avaya Converged Communications Server 5.2.1. Adding an Address Map Address maps are used in the Converged Communications Server ...

Page 23 - Click on the; link on the left side of the main Converged Communications Server; Map

Steps Description 1. Click on the Media Servers link on the left side of the main Converged Communications Server web page. The List Media Servers page is displayed. Click on Map . FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Re...

Page 24 - List Address Map; Add Map in New Group

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 24 of 35 Cisco7960SIP.doc Steps Description 2. The List Address Map page is displayed. Select Add Map in New Group .

Page 25 - Add Address Map

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 25 of 35 Cisco7960SIP.doc Steps Description 3. The Add Address Map page will be displayed. Specify a Name for the address map, and the Pattern match specification. In this e...

Page 26 - Speaker

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 26 of 35 Cisco7960SIP.doc Steps Description 4. The List Address Map page will be displayed again, this time with the updated map information. Note that the contact for the S...

Page 27 - shortname; parameter must be added to the phone-specific; messages; button can be programmed to call the

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 27 of 35 Cisco7960SIP.doc 5.3.1. Add Parameters to Configuration Files The configuration files should be modified to support two functions relative to Communication Manager ...

Page 28 - At the telephone, press the; settings; button to bring up the main configuration menu.

Steps Description 1. At the telephone, press the settings button to bring up the main configuration menu. up/down FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 28 of 35 Cisco7960SIP.doc

Page 29 - the

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 29 of 35 Cisco7960SIP.doc Steps Description 2. Using the up/down button, move the highlighted selection to Unlock Configuration , and press the Select function button. Enter...

Page 32 - Name; and; Number; for the speed dial button. For Outboard Proxy SIP features, this; Accept; function button when finished.

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 32 of 35 Cisco7960SIP.doc Steps Description 5. Enter the Name and Number for the speed dial button. For Outboard Proxy SIP features, this should be one of the FNEs. Press th...

Page 33 - button to exit from phone configuration mode.; Verification Steps; button at the phone to verify

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 33 of 35 Cisco7960SIP.doc Steps Description 6. Repeat steps 4-5 for each button desired, selecting most frequently used Outboard Proxy SIP features for assignment to the but...

Page 34 - speaker; Yes; Table 2; button and verify that the voice messaging system is called.; Additional References

FAS; Reviewed: WCH 10/22/2004 Solution & Interoperability Test Lab Application Notes ©2004 Avaya Inc. All Rights Reserved. 34 of 35 Cisco7960SIP.doc 2. Verify basic feature set administration by lifting the handset (or pressing the speaker button), and making calls to other phones. Test those fe...