Avaya 555-015-162 - Manuals

Page 4 - IMPORTANT USER SAFETY; environment could result in an electrical short circuit when; USE

Message Waiting Indicator One red LED in the center of the CALLMASTER VI serves as a Message Waiting indicator. The lamp lights when a message is waiting. Note: if this lamp flashes it is an indication that the DEFINITY ECS isnot communicating with the CALLMASTER VI. Call Appearance Buttons These tw...

Page 5 - SERVICE; SAVE THESE INSTRUCTIONS; CALLMASTER VI more useful when your PC is not available.; Headset On/Off Button; CALLMASTER III off-hook. Unlike the CALLMASTER III, plugging the; Mute Button; NOTE: Going on-hook ends mute, so the lamp will go from flashing to

● Never push objects of any kind into the equipment through housing slots since they may touch hazardous voltage points or short out parts that could result in a risk of electric shock. Never spill liquid of any kind on the telephone. If liquid is spilled, however, refer servicing to proper service ...

Page 6 - Log In Button

Using the Buttons IMPORTANT SAFETY WARNINGS The CALLMASTER VI has eight buttons and eight indicators (see FOR INSTALLATION Figure 6). The voice terminal arrives with some of the buttons—Log In,Headset On/Off, Mute, Call Appearance 1, Call Appearance 2, and Release—already configured with button assi...

Page 7 - Connecting the Headsets; TriStar; Figure 5: Connecting the Headset Jacks; ABOUT THE CALLMASTER; VI Voice Terminal; Headset Jacks; CALLMASTER VI voice terminal, as shown in Figure 1. You can plug; Figure 1: Headset Jacks

Connecting the Headsets The CALLMASTER VI provides two 4-pin headset jacks. The following Lucent headsets are compatible with the CALLMASTER VI: ● Starset* Headpiece ● Supra* Headpiece ● Mirage* Headpiece ● TriStar † Headpiece ● Encore † Headpiece The two headset jacks share the same volume setting....

Page 8 - Handset; Connecting the CALLMASTER VI to the PC; Buttons; DEFINITY ECS. See Figure 4 for an example of this connection.

Handset Connecting the CALLMASTER VI to the PC A handset with a custom cable operates when plugged into one of the headset jacks. The handset and cable are provided as a D-Kit. The pin-outs of the headset jack are compatible only with the handset provided in the D-Kit. Plugging in equipment that doe...

Page 9 - Connecting the CALLMASTER VI to the; INSTALLING THE CALLMASTER VI VOICE; DEFINITY ECS; TERMINAL; DEFINITY ECS is 7 feet long. This cord uses a standard 8-pin modular; Important Notes on Installation; Distance Limitations; DEFINITY ECS is determined by the diameter of the wire. See the; Checklist of Items; Table 1: Checklist Of Items; CALLMASTER VI

Connecting the CALLMASTER VI to the INSTALLING THE CALLMASTER VI VOICE DEFINITY ECS TERMINAL The D8W line cord that connects the CALLMASTER VI to the DEFINITY ECS is 7 feet long. This cord uses a standard 8-pin modular Important Notes on Installation jack, but only the two pins in the center are use...

Page 10 - Table 1: Checklist Of Items — Continued; Item; Installation Procedures; DEFINITY ECS, and the PC. Refer to the figure below when following; Figure 2: Installation Diagram

Table 1: Checklist Of Items — Continued Item Description EIA/TIA-574 Serial 9-pin, male/female cable Port Cable Headset (optional) Note: Lucent supports only Lucent headsets. For headsets compatible with the CALLMASTER VI, see “Connecting the Headset” later in this chapter. Handset (optional) Handse...

Page 15 - CALLMASTER VI voice terminal.

Testing the Headset To test the headset, do the following steps: 1. Connect the headset to the CALLMASTER VI. 2 . Press the Headset On/Off button, and listen for the dial tone. If you do not hear the dial tone, press a Call Appearance button. If you still do not hear a dial tone, check that the cord...

Page 19 - ORDERING DOCUMENTATION; This manual, the CALLMASTER; Copyright

ORDERING DOCUMENTATION This manual, the CALLMASTER ® VI Voice Terminal Installation and User’s Manual (Lucent Technologies 555-015-162), can be ordered from the Lucent Technologies BCS Publications Center. When ordering, use the following information: Write: Call: Fax: Order: Lucent Technologies BCS...