Avaya 2600 - Manuals - manualsarea.com

Page 2 - ProCurve Switch 2600 Series Switch; Hardware Configuration; The configuration in; Figure 1; shows a single site converged VoIP and data network with

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 2 of 21 ProCurve-ACM 1. Introduction These Application Notes describe the configuration of a Voice over IP (VoIP) solution using ProCurve 5400, 3500 and 2600 Series Switches...

Page 4 - Figure 1: Network Configuration

Page 5 - Equipment and Software Validated; Equipment; MM712 DCP Media Module; Configure Avaya Communication Manager; Configure QoS on Avaya Communication Manager

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 5 of 21 ProCurve-ACM 3. Equipment and Software Validated The following equipment and software/firmware were used for the sample configuration provided: Equipment Software/Fi...

Page 6 - Call Control PHB; Configure the ProCurve 5406zl Switch

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 6 of 21 ProCurve-ACM All network components are in network region 1 for this sample configuration. The DiffServ and 802.1P/Q values configured here will be downloaded to the...

Page 7 - Enable the following features on the ProCurve 5406zl Switch.; configure

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 7 of 21 ProCurve-ACM 1. Log into the ProCurve 5406zl Switch using the appropriate Login ID and Password. Login: Password: ProCurve Switch 5406zl# 2. Enable the following fea...

Page 9 - interface a21

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 9 of 21 ProCurve-ACM 5. Create and configure the telephony VLAN where all of the Avaya telephony equipment will run. • Assign a VLAN ID for the telephony VLAN. • Assign a na...

Page 11 - Set priority for telephony ports.

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 11 of 21 ProCurve-ACM 9. Set priority for telephony ports. • Set the port QoS priority of the Avaya Modular Messaging Message Storage Server to 6. • Set the port QoS priorit...

Page 16 - Assign a VLAN ID for the data VLAN.; Save the running configuration to the startup configuration.

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 16 of 21 ProCurve-ACM 4. Create and configure the data VLAN that will run between the control room and the closets. • Assign a VLAN ID for the data VLAN. • Assign a name for...

Page 18 - Interoperability Compliance Testing; LAN connectivity between the Avaya and ProCurve products.

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 18 of 21 ProCurve-ACM 9. Interoperability Compliance Testing Interoperability compliance testing covered feature functionality, serviceability, and performance testing. Feat...

Page 19 - Steps

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 19 of 21 ProCurve-ACM 9.2. Test Results All feature functionality, serviceability, and performance test cases passed. The ProCurve implementation did prioritize VoIP traffic...

Page 20 - References; Installing and Administering SIP Enablement Services

TMA; Reviewed: SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes ©2008 Avaya Inc. All Rights Reserved. 20 of 21 ProCurve-ACM 12. Additional References The documents referenced below were used for additional support and configuration information. The following Avaya product do...