Avaya 16-300310 - Manuals

Avaya 16-300310 – Manual in PDF format online.

Manuals:

Manual

Manual Avaya 16-300310

Summary

Page 4 - Overview; Avaya video conferencing Solutions Networking Guide; SIP endpoints; Prerequisites; Administering Avaya AuraTM Session Manager

AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 4 Overview This Quick setup guide covers the basic administration tasks to set up SIP and H.323 video endpoints. For detailed information, see Avaya video conferencing Solutions Networking Guide 6.0 . This guide is intended for ...

Page 5 - Enabling video on Communication Manager; parameters customer-options

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 5 ● Perform a network readiness test or network assessment to ensure your network is capable of supporting bandwidth demands of video over IP. Avaya recommends im...

Page 6 - change signaling-group; Avaya video conferencing Solutions Networking Guide 6.0

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 6 3 Enabling video for the SIP signaling group 1. On System Manager, click Elements > Feature Management > Network - Signaling Groups. 2. On the Signaling G...

Page 7 - clan; Avaya

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 7 4 Identifying the IP-codec-set 1. Note the values of the Near-end Node Name and Far-end Network Region fields. 2. If the Near-end Node Name field is set to PROC...

Page 8 - Communicator video endpoints and users using; Creating a template; Avaya video Conferencing Solutions Networking

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 8 Administration of Avaya Series 1000 Video Conferencing and Avaya one-X ® Communicator video endpoints and users using System Manager Perform the following steps...

Page 9 - the main buttons to

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 9 Table 3: Creating a template 1 Enabling Call Appearace feature 1. To enable the Call Appearance feature, click Button Assignment , and set the main buttons to c...

Page 10 - Adding video users

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 10 Adding video users Table 4: Adding video users 1 Creating a New User Profile On System Manager, click Users > Manage Users and click on New to open the New ...

Page 11 - Assigning an address

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 11 3 Enabling Session Manager Profile Select the check box corresponding to Session Manager profile and set the following parameters: ● Primary Session Manager : ...

Page 12 - Configuring the Avaya Series 1000 Video Conferencing Endpoints

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 12 Configuring the Avaya Series 1000 Video Conferencing Endpoints Perform the following steps to configure all Avaya Series 1000 Video Conferencing Endpoints usin...

Page 13 - video users

Configuration of SIP video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 13 3 Enabling SIP protocol Select Communications , click on SIP , and set the following parameters: ● SIP Username : ext. This parameter is the same as step 1 of ...

Page 14 - IP address of the voice system

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 14 Configure H.323 video endpoints on Communication Manager 6.0 This section provides a set of guidelines to configure video calling facility on H.323 endpoints with C...

Page 15 - Configuring Polycom Endpoints; Table 6: Configuring Polycom Endpoints

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 15 Configuring Polycom Endpoints Use this procedure to configure the Video calling facility for all Polycom endpoint users. Add Users/stations to Polycom endpoints Use...

Page 16 - Table 7: Add users/stations to Polycom endpoints

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 16 Table 7: Add users/stations to Polycom endpoints 1 Install the Polycom system and connect it to your network. 2 Upgrade the Polycom system software (if necessary). ...

Page 17 - ISDN

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 17 Configuring Polycom RMX Series Video Conferencing Bridge Platform Use this procedure to configure the Polycom RMX series video conferencing Bridge platform. Table 8...

Page 18 - change route-pattern n

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 18 4 Use the change trunk-group n command (where n is the trunk group you added in Step 2) to add members to the trunk group. The number of members depends on the maxi...

Page 19 - Table 8: Configuring Polycom RMX Series Video; display system-parameters customer-options

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 19 Configuring Ad-hoc Video Conferencing for a Polycom RMX Video Conferencing Bridge Platform To configure Ad-hoc conferencing for a Polycom RMX video conferencing bri...

Page 20 - Use the

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 20 4 Use the add video-bridge command to configure a video bridge for the RMX system. Set the following parameters: ● Name to the name for this video bridge (for examp...

Page 22 - Display Capacity for Ad-hoc video Conferencing.; conferencing information:; The number of video conferencing ports currently in use

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 22 Display Capacity for Ad-hoc video Conferencing. To display the capacity for Ad-hoc video conferencing on the Communication Manager system: Table 10: Display capacit...

Page 23 - Administering Polycom PathNavigator/ CMA Gatekeepers; Table 11: Administering Polycom PathNavigator/ CMA Gatekeepers

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 23 Administering Polycom PathNavigator/ CMA Gatekeepers Perform the following steps to configure a Polycom PathNavigator/CMA Gatekeepers: Table 11: Administering Polyc...

Page 25 - Configuring Avaya one-X; check box corresponding to; Enable Video; is selected on the endpoint. To configure one-X

Configure H.323 video endpoints on Communication Manager 6.0 AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 25 Configuring Avaya one-X ® Communicator Avaya one-X ® Communicator can be configured with either SIP or H.323 protocol. Ensure the check box corresponding to Enable ...