Bostitch T55 - Manual
Bostitch T55 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FASTENERS
- Page 4 – T55 TOOL SPECIFICATIONS; FASTENER SPECIFICATIONS:; OPERATION; CONTACT TRIP
- Page 5 – AIR SUPPLY AND CONNECTIONS; LUBRICATION; COLD WEATHER OPERATION:
- Page 6 – LOADING THE T55; ” FASTENER CONTROL ADJUSTMENT
- Page 7 – TOOL OPERATION
- Page 8 – TOOL OPERATION CHECK
- Page 9 – ASSEMBLY PROCEDURE FOR SEALS:
- Page 10 – TROUBLE SHOOTING; PROBLEM
- Page 11 – QUICK RELEASE DOOR
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE
SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF
YOU HAVE ANY QUESTIONS, CONTACT YOUR STANLEY-BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
OPERATION and MAINTENANCE MANUAL
T55
PNEUMATIC STAPLER
105041REVC 10/98
BOSTITCH
®
Stanley Fastening Systems
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION The Stanley-Bostitch T55 series staplers are precision-built tools, designed for high speed, high volume stapling. These toolswill deliver efficient, dependable service when used correctly and with care. As with any fine power tool, for best performance the manufacturer’s instructions m...
-4- T55 TOOL SPECIFICATIONS All screws and nuts are metric. FASTENER SPECIFICATIONS: TOOL AIR FITTING: This tool uses a free-flow connector plug, 1/4” N.P.T. The minimum inside diameter should be .200” (5mm). The fitting must be capable of discharging tool air pressure when disconnected from the air...
-5- AIR SUPPLY AND CONNECTIONS Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode, possibly causing injury. FITTINGS: Install a male plug on the tool which is free flowing and which will release air pressure from the tool when disconnected from...
