Bostitch 651S5 - Manual
Bostitch 651S5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – TOOL SPECIFICATIONS; FASTENER SPECIFICATIONS; MAINTAINING THE TOOL
- Page 5 – OPERATING MODES; HOW TO CHANGE OPERATING MODES:
- Page 6 – AIR SUPPLY AND CONNECTIONS; LUBRICATION; COLD WEATHER OPERATION:
- Page 7 – LOADING THE 651 STAPLER; LOADING THE 651 SERIES STAPLERS:
- Page 8 – FASTENER DEPTH CONTROL ADJUSTMENT; TO ADJUST THE FASTENER DEPTH CONTROL:
- Page 9 – TOOL OPERATION; BEFORE HANDLING OR OPERATING THIS TOOL:; OPERATION
- Page 10 – JAM CLEARING PROCEDURE
- Page 11 – TOOL OPERATION CHECK; MAINTAINING THE PNEUMATIC TOOL; ASSEMBLY PROCEDURE FOR SEALS:
- Page 12 – TROUBLE SHOOTING; PROBLEM
- Page 13 – AVAILABLE ACCESSORIES
651 SERIES
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE
189863RA 04/10
STANLEY FASTENING SYSTEMS L.P.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION
TOUTE
PARTICULIÈRE
AUX
CONSIGNES
DE
SÉCURITÉ
ET
AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE
BOSTITCH.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TOOL SPECIFICATIONS All dimensions in inches unless otherwise specified. -4- 651S5 Description 7/16” Crown Stapler Operation Pressure Range 70-120 PSI (4.9 to 8.43kg/cm 2 ) Fastener Type 16S5 & 17S5 Series Staples Fastener Gauge 16 & 17 Gauge Fastener Range 1” to 2” (25mm to 50mm) Magazine C...
-5- OPERATING MODES Always disconnect air supply before making adjustments as accidental actuation mayoccur, possibly causing injury. BOSTITCH OFFERS TWO MODES OF OPERATION FOR THIS SERIES TOOL. CONTACT TRIP: The common operation procedure on “Contact Trip” tools is for the operator to contact the w...
-6- AIR SUPPLY AND CONNECTIONS Do not use oxygen, combustible gases, or bottled gases as a power source for this tool astool may explode, possibly causing injury. FITTINGS: Install a male plug on the tool which is free flowing and which will release air pressure from the tool whendisconnected from t...
