Bosch D9124 - Manual
Bosch D9124 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Certifications and Approvals; Region; Installation/Configuration Notes; Category
- Page 3 – Parts Included; Another box contains:; Technical Specifications
- Page 4 – Ordering Information; D127 Reversing Relay Module; Reports two separate alarm conditions to the; D138 Mounting Bracket, Right Angle; Used to mount accessory modules in D8103,
Fire Alarm Systems | D9124 Addressable Fire Alarm Control Panel (FACP)
The D9124 FACP controls complex alarm systems used in
schools, universities, manufacturing plants, and health care
facilities. Program it for fire, fire supervisory, intrusion, or
access control applications. Program it locally using the
D5200CE hand-held programmer or remotely using RPS
over telephone lines or local-area or wide-area networks
(LAN or WAN).
The D9124 FACP is a modular assembly, installed in a red
steel enclosure, which can be surface- or flush-mounted.
The enclosure has keyed controller access making it
suitable for installation in public access areas.
Functions
Alarm Verification
The alarm verification feature reduces potential false alarms
by requiring a reset and a second alarm signal from the
device before the control panel raises an alarm condition.
Auxiliary and Standby Power
The 4 A, 24 VDC power supply charges the standby batteries
and powers auxiliary devices. The power supply responds
to low battery or battery disconnect conditions with a
Trouble LED and a Trouble Relay for sounders or lights.
Five system power trouble conditions are selected by DIP
switches. They can be individually linked to a central
station, or grouped to activate a trouble relay, allowing a
single supervised address to monitor the power supply.
A pair of 12 V batteries provides standby power. Two
additional batteries provide standby power for initiating
devices and notification appliances. All four batteries are
housed within the panel enclosure.
Note
Batteries are not included in the D9124 and
must be purchased separately.
Central Station Communication
Events can be communicated to a central station by the
digital communicator or by adding an optional Ethernet
interface module. The optional Bosch D6500 or D6600
NetCom Receiver and Modem IIIa
2
reporting format provide
individual point reporting to monitoring facilities.
The D5500 Remote Programming Software (RPS) allows
the following to be controlled from a central station:
•
Resetting notification appliances
•
Activating or deactivating remote annunciation
•
Activating or deactivating relays
•
Supervising battery condition
•
Setting point status and armed status
•
Enabling or disabling reporting functions
•
Shunting reporting points during servicing
D9124 Addressable Fire Alarm Control
Panel (FACP)
▶
24 VDC, 4 A power for initiation circuits and NACs;
12 VDC, 1.4 A power for system accessories
▶
Up to eight supervised or 32 unsupervised remote
annunciators
▶
One-man Fire Test Mode
▶
Schedules (Skeds function) service reminder for local
systems
▶
Low battery, AC power supply, and battery lead
supervision
▶
Dual phone line monitor
www.boschsecurity.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Bosch
- Model
- D9124
- Document type
- Manual
- Language(s)
- English
- Pages
- 4
- Format
Summary
2 | D9124 Addressable Fire Alarm Control Panel (FACP) Event Log Storage, Viewing, and PrintingThe D9124's memory log stores time, date, point, and userID for up to 1000 events. Programming options allowrestricting specific event reports to the central stationreceiver. A programming option allows the...
D9124 Addressable Fire Alarm Control Panel (FACP) | 3 Category Product ID Product Description D192G Bell supervision module D8125 POPEX module D8125MUX Zonex to dual multiplex interface D8128D OctoPOPIT module D8129 Octo-relay module D8130 Release module D9127U POPIT module (no tamper) D9127T POPIT ...
4 | D9124 Addressable Fire Alarm Control Panel (FACP) Ordering Information D127 Reversing Relay Module Reports two separate alarm conditions to the central station. D127 D136 Plug‑In Relay Maximum rating is 1 A at 24 VDC or 2 A at 12 VDC. Available individually (D136) or in a package of 25 (D136‑25)...
