Avaya P333T - Manual
Avaya P333T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Unpack; Equipment
- Page 4 – Power up; Avaya P330 AC Version
- Page 5 – Connect the cables; Connect the console cable
- Page 6 – Basic configuration; To connect a PC terminal or VT-100 terminal to the Avaya P330
- Page 7 – Setting the Parameters; Default Switch Parameters
- Page 10 – Documentation and Online Help
- Page 11 – Notes
- Page 12 – Contact Information; From the United States:
Avaya P333T
Quick Start Guide
Unpack
Rack mount (optional)
Connect the cables
Configure
Run Web-based
Manager (optional)
Power up
1
2
3
4
5
6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Unpack Check the package contents for the following: ! If any items are missing or damaged, contact your supplier. Equipment • One Avaya P333T Layer 2 Workgroup Switch • One AC power cable • One RJ-45 to DB-9 serial adapter cable • Four rubber feet • Four screws with washers for rack mounting ! Ethe...
Power up Avaya P330 AC Version 1. Insert the power cord into the power connector (BUPS or Power Supply) on the rear of the unit. 2. Insert the other end of the power cord into the electricity supply or the BUPS connector. ! The unit powers up and performs a self test procedure. The LEDs flash at reg...
4 FIV – Force Initial Version (see Avaya P330 User ’s Guide)LNK – When ON, link is OK COL – When ON, indicates a collision on the port in HDX modeTx, Rx – Shows traffic activity for transmitted and received packetsFDX – Shows Full/Half Duplex mode FC – When ON, Flow Control is enabled for a port in ...
