Avaya 8400-SES - Manual
Avaya 8400-SES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – General Test Approach and Test Results; Interoperability Compliance Testing
- Page 3 – Reference Configuration; Figure 1; to demonstrate calls between the SIP-based
- Page 4 – Figure 1: Test Configuration of SpectraLink 8400 Series
- Page 5 – Equipment and Software Validated; Equipment; Avaya G650 Media Gateway; Configure the Avaya Aura® Communication Manager
- Page 6 – Enter the; display system-parameters customer-options; command. Verify that there are; Maximum Off-PBX Telephones – OPS; licenses. If not, contact an authorized Avaya; Page 2
- Page 7 – CODEC SETTINGS
- Page 9 – change node-names ip
- Page 12 – to view the feature name
- Page 13 – Configure SIP Enablement Services; Configure SIP Enablement Services Server Properties; Launch a web browser, enter; Administration; upon successful login.
- Page 14 – Integrated Management SIP Server Management
- Page 15 – Configure Communication Manager Server Interface; page. Prior to the compliance test, the Communication
- Page 16 – The following screen displays the
- Page 19 – Add; Configure SpectraLink 8400 Series; – The first file that the phone searches while booting up is
- Page 20 – Verification Steps; Users; Additional References; Administering Avaya Aura
CRK; Reviewed:
SPOC 7/1/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
1 of 21
Polycom8400-SES
Avaya Solution & Interoperability Test Lab
Application Notes for Polycom® SpectraLink® 8400 Series
Telephones and Avaya Aura® Communication Manager
and Avaya Aura® SIP Enablement Services – Issue 1.0
Abstract
These Application Notes describe the procedures for configuring Polycom® SpectraLink®
8400 Series Telephones which were compliance tested with Avaya Aura® Communication
Manager and Avaya Aura® SIP Enablement Services.
The overall objective of the interoperability compliance testing is to verify Polycom®
SpectraLink® 8400 Series Telephones functionalities in an environment comprised of Avaya
Aura® Communication Manager, Avaya Aura® SIP Enablement Services, various Avaya
H.323, SIP IP Telephones, and DCP telephones.
Information in these Application Notes has been obtained through DevConnect compliance
testing and additional technical discussions. Testing was conducted via the DevConnect
Program at the Avaya Solution and Interoperability Test Lab.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CRK; Reviewed: SPOC 7/1/2011 Solution & Interoperability Test Lab Application Notes ©2011 Avaya Inc. All Rights Reserved. 2 of 21 Polycom8400-SES 1. Introduction These Application Notes describe the procedures for configuring Polycom® SpectraLink® 8400 Series Telephones (8440 and 8450) which wer...
CRK; Reviewed: SPOC 7/1/2011 Solution & Interoperability Test Lab Application Notes ©2011 Avaya Inc. All Rights Reserved. 3 of 21 Polycom8400-SES hold/resume, transfer, conference, Feature Name Extension (FNE), and SpectraLink 8400 Series interactions with SIP Enablement Services, Communication ...
CRK; Reviewed: SPOC 7/1/2011 Solution & Interoperability Test Lab Application Notes ©2011 Avaya Inc. All Rights Reserved. 4 of 21 Polycom8400-SES Figure 1: Test Configuration of SpectraLink 8400 Series
