Avaya 700445109 - Manual

Agent Login

If the telephone prompts “Enter Username” you must first log in to the phone extension using
your User Name and Password. Successful telephone extension login displays the screen
from which you can log in as an agent:

1. Press the

Login

softkey.

2. Enter your Agent ID.
3. Press the

Enter

softkey or the

OK

button.

4. Enter your Agent Password, if required.
5. Press the

Login

softkey or the

OK

button

.

Agent Logout

The Logout softkey appears whenever you are not active on a call. To log out as an agent,
press

Logout

. If required, enter a reason code for the logout. Depending on how your call sys-

tem is administered, system-generated “forced” logouts might occur based on clock time or
other factors. A forced logout requires a reason code entry if one is not already displayed.

Changing the Agent Work Mode or Agent State

The top display line shows your current agent work mode and state. To change the work mode
or state, press the line/feature button assigned to the mode/state to which you want to change.
Alternately, you can scroll right and then scroll down to the desired mode and press the

OK

button. Agent work modes/states are:

- Aux - you are usually placed in an auxiliary state after agent login and must change to

Auto-in or Manual-in work mode to be able to receive call center calls. You can change
back to Aux to indicate you are not available to receive call center calls, for example,
you want to take a break or to place an outgoing call. Changing to Aux may require a
Reason Code entry. Predefined Aux/Reason Code combinations may be available on
your line buttons,

- ACW state - you want to perform after-call work, (ACW) such as completing a call-

related form. The system might automatically switch you to ACW in some instances.

- Auto-in work mode - you want to receive a new incoming call automatically upon

completing a call (dependent on your system setup).

- Manual-in work mode - you want to take a specific action to receive calls, for example,

pressing a feature button or softkey (dependent on your system setup).

- Available state -you are able to receive a call center call.
- On-Call state - you are currently active on a call center call.

Viewing Your Skills

Agents are assigned one or more skills so that incoming calls can be matched with the agents
best suited to answer them. The Skills screen always displays immediately after agent login,
and can be viewed by pressing the

Skills

softkey any time you are logged in. You cannot

change your own skill set - your supervisor must make any changes to your skill assignments.

Viewing Your Features

To see the features assigned to your phone, press the right navigation arrow, then use the
down navigation arrow to scroll through the features available. Notice that as you scroll from
feature to feature, the corresponding line/feature button LED blinks to indicate the button to
which that feature is assigned.

Scrolling and Navigation

To navigate through the options and features on your telephone display, use the navigation
arrows to scroll and the

OK

button to select lines or options. A navigation icon appears in the

phone display to indicate that you can scroll to more options or information. Use the up and
down navigation arrows to scroll up or down through lists. When you scroll to a line on the dis-
play, that line is selected. Use the right and left navigation arrows to go to Features or to move
the cursor right or left when entering text.

The softkey labels will change according to the options available for the selected line. The OK
button is a shortcut for the default action. For example, when you select an entry in your con-
tacts list, pressing the

OK

button places a call to that person.

Answering and Making a Call

Answering a Call

When logged in as an agent with a call delivery mode of a

uto-answer

, you hear a “zip tone” to

announce that you have been automatically connected to a call. No action is required other
than to provide your standard greeting.

When logged in as an agent with a call delivery mode of

manual answer or

when not logged

in as an agent, listen for an audible ring, then press the

Answer

softkey or the line button of

the flashing call appearance.

In either case, if you hear an announcement that describes the origin of or service requested
by the incoming call, wait until the announcement ends before taking an action like pressing
Conference, Transfer, or a line button.

Press the

Release

button to end the call.

Making a Call

1. Press a line button for an available call appearance.
2. Dial the number you want to call.

Putting a Call on Hold

1. Press the

Phone/Exit

button to view the main Phone screen, if necessary.

2. Press the

Hold

button.

3. Press the

Resume

softkey to retrieve the call or press the line button of the held call.

Transferring a Call

1. From the Phone screen, select the line you want to transfer.
2. Press the

Transfer

button.

3. Dial the telephone number, or call the person from the Contacts list or the Call Log list.
4. When the person answers, press the

Complete

softkey to transfer the call.

Conference Calls

Setting up a conference call

1. When on an active call, press the

Conference

button.

2. Dial the telephone number, or call the person from the Contacts list, or call the person from

the Call Log list.

3. When the person answers, press the

Join

softkey to add the person to the existing call.

4. Repeat these steps to add an additional person to the conference call.

Adding a person on hold to a conference call

1. When on an active call, press the

Conference

button.

2. Select the call on hold that you want to add to the conference.
3. Press the

Resume

softkey or press the line button of the held call to take the call off hold.

Dropping the last person added from a conference call

1. While active on a conference, press the

Drop

softkey to release the last party added to the

conference.