Avaya 555-233-116 - Manual

Avaya 555-233-116

Avaya 555-233-116 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
188 Page 188
189 Page 189
190 Page 190
191 Page 191
192 Page 192
193 Page 193
194 Page 194
195 Page 195
196 Page 196
197 Page 197
198 Page 198
199 Page 199
200 Page 200
201 Page 201
202 Page 202
203 Page 203
204 Page 204
205 Page 205
206 Page 206
207 Page 207
208 Page 208
209 Page 209
210 Page 210
211 Page 211
212 Page 212
213 Page 213
214 Page 214
215 Page 215
216 Page 216
217 Page 217
218 Page 218
219 Page 219
220 Page 220
221 Page 221
222 Page 222
223 Page 223
224 Page 224
225 Page 225
226 Page 226
227 Page 227
228 Page 228
229 Page 229
230 Page 230
231 Page 231
232 Page 232
233 Page 233
234 Page 234
235 Page 235
236 Page 236
237 Page 237
238 Page 238
239 Page 239
240 Page 240
241 Page 241
242 Page 242
243 Page 243
244 Page 244
245 Page 245
246 Page 246
Page: / 246

Table of Contents:

  • Page 7 – Contents; About this book
  • Page 8 – Extenders for 2-wire DCP endpoints
  • Page 9 – External modems
  • Page 10 – Terminal server installation
  • Page 11 – Stratum 3 clock
  • Page 12 – Malicious call trace
  • Page 13 – Multimedia communications
  • Page 14 – Connector and cable pinout charts; IN
  • Page 15 – Overview
  • Page 16 – Basic Call Management System (BCMS) Operations
  • Page 17 – Intuity AUDIX; INTUITY Interchange System Supporting Documentation; Adjuncts and peripherals resource list; Continued on next page
  • Page 18 – Conventions used in this book; screen display
  • Page 19 – Systems and circuit packs; The term “ASAI” is synonymous with the newer CallVisor ASAI.; Admonishments; Admonishments in this book have the following meanings:; Draws attention to information that you may find helpful.
  • Page 20 – Denotes possible harm to hardware or equipment.; Physical dimensions; Antistatic protection
  • Page 22 – Power output
  • Page 23 – How to get help; If you are within the United States, go to the Avaya Web site at; Tell us what you think
  • Page 25 – 09A/B universal coupler; Figure 1
  • Page 26 – Typical 909A/B universal coupler; Table 2
  • Page 28 – Figure 2; Typical modular jack pinout
  • Page 29 – Auxiliary power supplies; through
  • Page 30 – Local auxiliary power supply; Table 5; 02C1 Attendant Console Cabling Distances
  • Page 31 – Sources of auxiliary local power; An attendant console can derive auxiliary power from:; Required safety precautions; Do not attach the power supply cord to building surfaces.
  • Page 32 – Circuit protection
  • Page 33 – See
  • Page 35 – Battery
  • Page 36 – Installing the expanded power distribution unit; Figure 4; Terminal mix
  • Page 37 – Expanded power distribution unit; distribution unit
  • Page 38 – Powering up and testing AC and DC power; FAIL: either GREEN or YELLOW LED is not lit.
  • Page 39 – Wire the 1146 power distribution unit; Wire endpoints to the 1146 while power from the 1145B is on.; Typical wiring to a terminal; label next to each connector.
  • Page 40 – Replacing the batteries; Disconnect the terminal equipment from the wall jack.
  • Page 41 – Typical 1151A power supply
  • Page 42 – Standards compliance
  • Page 44 – Figure 7; Typical connections to a 2-wire DCP workstation
  • Page 45 – DCP extender, stand alone; Appendix A; Typical DCP extender connections
  • Page 46 – DCP extender, rack mount; Figure 9; line circuit packs
  • Page 49 – Typical connections to a data module; Installation procedure; Obtain required equipment
  • Page 50 – Data modules and asynchronous data units; The cable connects the PC to the data module.; Set hardware options; Setting 7400A data module hardware options
  • Page 51 – Data module mode selector
  • Page 52 – Setting 7400B data module hardware options; shows the front and rear of a 7400B data module.
  • Page 54 – Connect data modules; Connecting multiple data modules to the
  • Page 55 – Connecting a single data module
  • Page 56 – Connecting multiple data modules to the system; Z77A data mounting; pulling out the plungers at the left and right sides of the bar.
  • Page 57 – Configuring the 7400A data module
  • Page 58 – 400A asynchronous data module; Using the 7400A menu system
  • Page 59 – Push the button indicated by the arrow (; Pin
  • Page 61 – Setting interface options on 7400A DCE
  • Page 63 – Setting speed options on 7400A DCE; Press the NEXT/NO button to continue with the setup procedure.; A series of SET number SPEED? prompts appears.
  • Page 64 – Setting the automatic-answer feature on 7400A DCE
  • Page 65 – Setting the break-disconnect option on 7400A DCE; button to keep the default.; button to keep the default or the ENTER/YES button to make a change.
  • Page 66 – Setting parity on 7400A DCE; You can set the remote loopback option to GRANT
  • Page 67 – Configuring the ring indicator on 7400A DCE; Accept the default values, unless otherwise instructed.
  • Page 68 – Enabling test mode on 7400A DCE; Your changes are saved.
  • Page 69 – Checking DEFINITY administration on 7400A DCE; NEXT/NO and BACK buttons at the same time.; If you see the message DIAL TONE followed by DISCONNECT CALL?,; Configuring the 7400A for modem pooling (DTE) applications; From the HOME screen, proceed as follows.
  • Page 70 – Setting speed options on 7400A DTE
  • Page 73 – to; CI
  • Page 74 – If you pressed ENTER/YES in the preceding step and the; button
  • Page 75 – Restoring factory defaults on 7400A DTE
  • Page 76 – When the DATA LOOPBACK? prompt appears on the LCD, press the
  • Page 77 – When the REMOTE LOOPBACK? prompt appears on the LCD, press the; The factory options are restored, and you return to the HOME screen.
  • Page 79 – Configuring the 7400B for remote administration
  • Page 80 – Exiting command mode on the 7400B; shows the front and rear of a 7400C synchronous data module.; Setting the data speed for the 7400C; From the HOME screen, press the NEXT/NO button until SET DATA
  • Page 82 – Setting other data options for the 7400C; to ON using the menus and controls as described above, in; ‘‘Setting the; Configuring the 7400C for a dedicated private line; Set the dialing method to MANUAL, using the menus and controls as; ‘‘Setting the data speed for the 7400C’’
  • Page 83 – Configuring the 7400D data module; Options
  • Page 84 – Accessing the menus of the 7400D; You configure the 7400D from a set of menus.
  • Page 85 – Setting speed options for the 7400D
  • Page 86 – Setting the automatic-answer feature on the 7400D
  • Page 93 – Codes for disabling default settings of the 8400B data module
  • Page 94 – Configuring the ExpressRoute 1000 data module
  • Page 95 – Typical ExpressRoute 1000 data module connections; Administer the data modules; list config port; To BRI circuit pack or DCP digital line
  • Page 96 – Typical system-configuration listing; the corresponding port number.; add data-module next
  • Page 97 – Typical data-module form; step
  • Page 99 – Recommended modems include:
  • Page 100 – Configuring the 3715 for CMS
  • Page 101 – COMPSPHERE 3910 modem, front panel
  • Page 102 – Configuring the 3910 for CMS; Single Up Arrow moves up one level in the menu tree.
  • Page 103 – The Factory menu item appears.; Loading the copied default settings; On the front panel of the COMSPHERE 3910, press F2 to select
  • Page 105 – The RTS Action menu heading appears.; Configuring RS-232 RTS and CTS send signals; The CTS Control menu heading appears.; Configuring various control features
  • Page 108 – Exiting the dial line menu; Skip over the remaining menu headings. Proceed as follows.; Saving the new configuration; The Command Complete message appears.
  • Page 110 – Configuring the MT5634ZBA-USB modem; Administration; You have to administer each modem that you attach to the system.; Accessing the administration form; external (it should be set to none if no modem is installed).
  • Page 111 – Setting data-transmission parameters; This enables LAPM and MNP error control.; Setting dialing parameters; Specifies standard dialing command.
  • Page 112 – Setting additional, modem-specific parameters; ENTER
  • Page 113 – Printers; Connecting printers using TCP/IP; for more information.; Task list; If you are using a terminal server, also complete
  • Page 114 – System printer; RETURN
  • Page 115 – ‘‘Administering IP node names’’ on page 131; Setting up the PC
  • Page 117 – DEFINITY LAN gateway system; What is the DEFINITY LAN gateway?; In simplest terms, the DEFINITY; How the DLG application works; Here is a high level description of how the DLG application works.
  • Page 118 – How is the DLG application is packaged; processor
  • Page 119 – Switch-based connectivity — co-resident DLG
  • Page 121 – You can connect up to four adjuncts through one terminal server.; Switch-to-adjunct LAN connectivity through a terminal server
  • Page 122 – Distance limits; Required equipment
  • Page 123 – Installing and administering the terminal server; Cabling diagram; shows the connection between the terminal server port and a call; Stand-alone call accounting system link using a terminal server; Making the connections; Connecting an adjunct to the IOLAN+
  • Page 124 – Administering the IOLAN+
  • Page 127 – and select Save & Exit to effect the changes.; Rebooting the IOLAN+; to view the Administration Menu.; Select reboot and press
  • Page 130 – Testing
  • Page 131 – Potential failure scenarios and repair actions; ‘‘Rebooting the IOLAN+’’ on page 127; Administering IP node names; Enter the name and the IP address of the C-LAN board, as well as any
  • Page 132 – Administering IP services; Service Type; PMS for the property management system.
  • Page 135 – DS1/T1 CPE loopback jack; Installing a loopback jack; You can install a loopback jack with or without a smart jack.; With a smart jack
  • Page 136 – Without a smart jack
  • Page 138 – Testing the integrity of the loopback circuit
  • Page 139 – Testing the integrity of data sent over the loop; Now perform the second part of the test, checking for data errors.; Clearing the results of previous tests; Zero out the performance measurement counter. At the management
  • Page 140 – Running the data test; DS1 Troubleshooting
  • Page 142 – Restoring DS1 administration; ‘‘Administering the DS1 for the test’’ on page 138; ‘‘Restoring DS1 administration’’; Condition
  • Page 143 – Loopback testing with a smart jack; Releasing the DS1 circuit pack; Release the DS1 circuit pack. From the management terminal, enter
  • Page 145 – Network interface at smart jack for a 120A2 (or later) ICSU
  • Page 146 – Network interface at smart jack for an MM710 multi-media module
  • Page 148 – an MM710 multi-media module
  • Page 151 – Network interface at “dumb” block for a 120A2 (or later) ICSU
  • Page 152 – Network interface at “dumb” block for an MM710 multi-media module
  • Page 153 – Testing a loopback jack without a smart jack
  • Page 154 – MM710 multi-media module
  • Page 156 – Configurations using fiber multiplexers
  • Page 157 – ISDN converters and adapters; PRI to Digital Private Network Signaling System (DPNSS)
  • Page 158 – Converters for single-carrier cabinets; Typical DASS or DPNSS converter cabling
  • Page 159 – Typical PRI to BRI converter cabling
  • Page 160 – Converters for multi-carrier cabinets
  • Page 163 – Set clock options; CI Option Switch Settings; T1 select
  • Page 165 – Cabling the Stratum 3 clock
  • Page 166 – Typical connections to Stratum 3 clock
  • Page 167 – Stratum 3 clock wiring installation procedure; Route a B25A cable from the “CLOCK” end of the Y-cable to the cross-; Maximum cabling distance for different CSUs
  • Page 169 – Circuit-pack cross-connects for high or critical reliability
  • Page 170 – From Stratum 3 Clock
  • Page 171 – shows typical connections.; Typical cabling for busy tone disconnect; circuit pack such as a TN747B
  • Page 173 – Connecting CDR equipment; Chapter 4, ‘‘Data modules and asynchronous data
  • Page 175 – to save your changes.
  • Page 176 – Call detail recording (CDR) option settings; Setting up an RSP configuration; To set up an RSP configuration:; Setting up the switch; To set up the client application on the PC you will be:
  • Page 177 – Downloading RSP; reliable; Go; Installing RSP
  • Page 179 – DEFINITY INADS; The DEFINITY; Analog loopback; station port through the MDF. See
  • Page 180 – Analog loopback connections; Connect each tip/ring port to a separate analog line circuit pack.
  • Page 181 – Type; Enter; Group Extension; Enter; Partner installation
  • Page 182 – INADS connection with power fail transfer; Check local regulations regarding this connection method.
  • Page 183 – Standard reliability; of cable 7 inside MDF
  • Page 185 – European platform connection:; High reliability
  • Page 187 – Test Remote Access Port; Example of an ART script file
  • Page 189 – universal coupler provides seizure control to the recorder.; TN763/D auxiliary trunk circuit pack
  • Page 191 – shows the connections
  • Page 194 – A wiring block must be locally engineered.; For G700 Media Gateways
  • Page 197 – Background information
  • Page 198 – Paging and announcement equipment; IP configurations; ) is located in the G700 Media Gateway. In the event of a loss
  • Page 199 – Media Gateway; Voice Mail
  • Page 200 – Multi-site environment; In
  • Page 201 – S8700 Media Server with IP connect; units; INTUITY
  • Page 202 – Loudspeaker paging without paging adapter
  • Page 203 – Loudspeaker paging with universal coupler
  • Page 204 – ESPA radio paging; shows typical connections to European Standard Paging Access; Typical ESPA radio paging connections
  • Page 207 – MASI for MMCX; D8W cable modular pin assignments
  • Page 208 – Modular jack pin assignment; Direction connection; MMCX connected directly to an Avaya Media Server
  • Page 209 – Main distribution frame connection; MMCX connected to an Avaya Media Server through the MDF; Wideband endpoints; Nonsignaling configuration; . The maximum distance
  • Page 210 – Typical nonsignaling wideband configuration; Signaling configuration; shows
  • Page 211 – Typical signaling wideband configuration; shows a remote port module. In this configuration, there can be
  • Page 212 – CSU and the bandwidth controller.; Connect the endpoints; Use the following procedure and
  • Page 213 – Typical multimedia call handling connections; Each PC MMCH endpoint must contain a BRI adapter.
  • Page 214 – Administer one number complex; Setup and test the MMCH installation
  • Page 217 – ProShare configuration; Minimum system requirements
  • Page 219 – Vistium configuration; MB RAM, 17 MB recommended
  • Page 221 – Select ANSWER on the test endpoint or pick up the test telephone; Troubleshooting Zydacron; Solution: Restart the Zydacron application. Press the; Ctrl; keys at the; Symptom: Cannot make an outgoing call. Get a Message Interrupt.; Place conversion test call; The; field must be set to y on page 2 of the Station; Expansion services module
  • Page 222 – Typical multimedia call handling ESM connections; ESM installation; ‘‘ESM installation’’
  • Page 223 – xxxxx (where xxxxx is the; Place test call; ‘‘Setup and test the MMCH installation’’ on page 214
  • Page 226 – Connections to an asynchronous data unit; Using data modules; the vendor’s documentation.
  • Page 228 – Administering adjunct parameters
  • Page 229 – ‘‘Downloading RSP’’
  • Page 230 – Browse to the Avaya Customer Support web site:; The Install Shield Wizard steps you through the installation.; Administering RSP
  • Page 231 – Lead and color designations
  • Page 232 – Color
  • Page 235 – TN2185B ISDN-BRI — 4-wire S interface pinout
  • Page 237 – Wire Color
  • Page 239 – Connector and Cable Pinout Charts
  • Page 243 – Index; Numerics
Loading the manual

,QVWDOODWLRQIRU$GMXQFWVDQG3HULSKHUDOV

IRU$YD\D0XOWL9DQWDJHŒ6RIWZDUH

Release 1.2

555-233-116

Issue 4

October 2002

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 7 - Contents; About this book

Contents Issue 4 October 2002 7 555-233-116 About this book 15 ■ Overview 15 ■ Conventions used in this book 18 Systems and circuit packs 19 Admonishments 19 Physical dimensions 20 ■ Antistatic protection 20 ■ Remove/install circuit packs 20 ■ Security 21 ■ Standards compliance 21 ■ LASER product 22...

Page 8 - Extenders for 2-wire DCP endpoints

Contents 555-233-116 8 Issue 4 October 2002 Wire the 1146 power distribution unit 39 Replacing the batteries 40 Storing the batteries in inactive units 40 Repairing short circuits and resetting red LEDs 40 ■ 1151A and 1151A2 power supplies 40 Desk mounting 42 Wall mounting 42 Standards compliance 42...

Page 9 - External modems

Contents Issue 4 October 2002 9 555-233-116 5 External modems 99 ■ Hardware required when configuring modems 99 ■ Paradyne COMSPHERE 3715 100 Configuring the 3715 for CMS 100 Configuring the 3715 for modem pooling 100 ■ Paradyne COMSPHERE 3810 Plus and 3811 Plus 101 Configuring the 3810 Plus and 381...

Other Avaya Models

All Avaya Other