Avaya 3606 - Manual

555-301-705, Issue 1

1

Part Number 72-0170-19, Revision B
February 2003

Avaya™ 3606 Wireless IP Telephone Quick Reference Guide

Accessing the Function Menu

Press FCN followed by a digit (1-4, and * or #) while off-hook
to access the feature options programmed for your Wireless
Telephone template.

When you are on a call, your Wireless Telephone display will
show a solid number indicating which line you are currently
using. If a second call comes in on another line, a flashing
second number will appear to indicate which line is ringing.

The Line appearances administered for your extension are
displayed by pressing the LINE key when the Wireless
Telephone is off hook. If the > icon is on, additional
appearances can be displayed by repeatedly pressing the LINE
key. The line is selected by pressing the number key
corresponding to the number to the left of the “=” in the menu.
The line does not have to be on the current display to be
selected.

The Wireless Telephone has two volume levels, low and high.
You can set your low volume level by pressing FCN while
your Wireless Telephone is on-hook, and selecting a volume 1
through 8. While you are talking on the Wireless Telephone,
press VOL once to switch your volume level from low to high
and vice versa. The Wireless Telephone will reset to the low
volume when powered off.

See User Options at right for additional options that can be
configured at the end user level.

Press START, then FCN to access the Function Menu, which
lists the feature options programmed in your Wireless
Telephone.

Function Key

Strokes

Fill In Your

Feature Settings

FCN + 1

Mute

FCN + 2

Last Number Dialed

FCN + 3

Transfer

FCN + 4

Conference

FCN + 5

FCN + 6

FCN + 7

FCN + 8

FCN + 9

FCN + 0

For information on Battery Pack charging, see the
Avaya™ 3606 Wireless IP Telephone User Guide.

3606 Wireless IP Telephone

On/Off

Press and hold

PWR

. Two chirps on, one chirp off

Make a call

Press

START

to get dial tone.

Hang up

Press

END

. Be sure to do this at the end of each call.

Answer call

Press

START

. Line indicator comes on steady when

the call is answered.

Answer

second call

Press

HOLD

to put your current call on hold, or

END

to

hang up. Press

LINE

+ the digit that is flashing.

Headset

answer

Press any key (other than

PWR

or

END

) to answer a

call when a headset is plugged in

Hold

Press

HOLD

Take off Hold

Press

LINE

followed by the digit for the line on hold,

which will be flashing.

Function

Pressing

FCN

while off hook allows you to scroll

through menu screens.

User Options

Press

FCN

while on hook to change handset settings

(* shows current, follow display instructions to set):
Volume level—1 (softest) to 8 (loudest)
Ring Type (available types vary)
High Noise Mode—select:
Normal (for most office environments)
High (for moderate background noise)
Severe (for extremely noisy conditions)

Silence while

ringing

Press the

END

key to silence the ring.

Adjust Volume

Press

VOL

while in a call to toggle between base and

louder level

Status/Tone Indicators

NO SVC

Alarm / Restore

An alarm sounds when the Wireless Telephone cannot
receive or place calls. You may be outside of the
coverage area. Walk back into the covered area. A
restore tone indicates service is re-established.

BATT

Beep

Your Battery Pack charge is low. Your Battery Pack
needs to be recharged or replaced.

MSG

You have a voice mail message.