Airlink101 AP671W - Manual
Airlink101 AP671W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 3
- Page 3 – Select an operation mode for your Access Point and click; Next; Configure the settings for the operation mode you have selected.; Next
- Page 4 – Universal Repeater
- Page 5 – Finish; to end the EZ Setup Wizard.; Congratulations! You have finished the configuration for your; Technical Support
Quick Installation Guide
Wireless N 300 Multi-Function Access Point
with 5-Port Switch
Model # AP671W
Ver. 1A
Before you begin the installation, please check the items of your package:
•
Wireless N 300 Multi-Function Access Point
•
Power
Adapter
•
Ethernet Cable (Cat.5)
•
Setup
CD
•
Quick
Installation
Guide
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Installing the Access Point
Step 1
Insert the Setup CD into your CD-ROM drive.
Section 1
Package Contents
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step 2 Click Next to start the configuration. Step 3 Connect one end of a network cable to a LAN port (1~5) of the AP and connect the other end to a LAN port of the router. Power on the AP. Step 4 Make sure the LEDs of POWER , WLAN and the LAN port that is connected to the Router are lit. If not, tr...
Step 6 Configure the IP Address for your Access Point for future management use. Click Next . Step 7 Select an operation mode for your Access Point and click Next . The wizard will guide you to finish the following corresponding settings. Step 8 Configure the settings for the operation mode you have...
8.2 Universal Repeater Click on Site Survey , select the wireless router or AP you wish to repeat on the popup Wireless Site Survey window and click Connect . Configure a network name in Main SSID for the repeater to be identified. 8.3 AP Client Click on Site Survey , select the wireless router or A...
