Airlink101 AMPS230 - Manual
Airlink101 AMPS230 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 4; Installing the PS Software; The PS Software must be installed on; all computers; you plan to use; Install PS Software; Section 2
- Page 4 – Next; Choose Destination Location; Next; at the; Select Program Folder
- Page 5 – Configuring the Printer Server; one time; Section 3
- Page 6 – Step 2; Once the printer server appears in the; Server Name; You should see your printer next to; Device name; A password box will appear. The default password is; admin; and click; OK
- Page 7 – Step 5
- Page 8 – and enter your custom settings. Otherwise,; DHCP Assign Automatically; If your network uses a workgroup name other than WORKGROUP, you
- Page 9 – Step 8; If you have specific; AppleTalk; settings, you can enter them here or; Save; to save the changes to your print server.
- Page 10 – Adding the Printer to the Computer; Section 4
- Page 12 – Step 6; In; Printers and Faxes; Right click on the copy and click; Set as Default Printer; on each of the computers you plan to use with the print
- Page 13 – Technical Support; Section 5
Quick Installation Guide
USB2.0 1-Port Multi-Functional Printer Server
Model # AMPS230
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Connecting the Printer Server
WARNING:
Only a USB printer may be connected to the USB port of the
Printer Server. Connecting any other USB device to the Printer Server may
damage the Printer Server.
Note:
Before connecting the Printer Server, you must install the printer driver
on each computer you plan to use with the printer. Make sure that you are able
to print, scan, and fax from each with your multi-functional printer directly
connected to your computer(s).
Step 1
Power down the printer and the printer server.
Step 2
Connect one end of a networking cable to your router, then connect the
other end to the Ethernet port on the back of the print server.
Step 3
Connect the USB cable coming from your printer into the USB port on
the printer server.
Section 1
Ver. 1A
Package Content:
•
1-Port MFP Server
•
Power Adapter
•
Ethernet Cable
•
Driver & Utility CD
•
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step 4 Turn on the printer. Once the printer is powered on, connect the print server’s power adapter to an electrical outlet. Installing the PS Software Note: The PS Software must be installed on all computers you plan to use with the print server. Step 1 Insert the Utility CD into your CD-ROM drive...
Step 4 Click Next at the Choose Destination Location screen. Step 5 Click Next at the Select Program Folder .
Step 6 Once the installation is complete, make sure that the Launch PS-Link box is checked and click Finish . Configuring the Printer Server Note: The following steps only need to be performed one time from one computer. Step 1 Click the Discover button and your printer should show up under Server N...
