Airlink101 AEN-U25W - Manual
Airlink101 AEN-U25W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – Package Contents
- Page 4 – Hard Drive Installation
- Page 7 – Fasten the four screws removed in Step 1.
- Page 8 – Driver Installation for Windows 98SE; Click; Next; when the; Add New Hardware Wizard
- Page 9 – Select; Search for the best driver for your device (Recommended); and click; Select the; Specify a location; check box and click; Browse; drive and open the
- Page 10 – to install the driver.; Finish; to complete the driver installation.
- Page 11 – Installation Verification; Control; and look for; USB Mass Storage; under; Universal Serial Bus controllers; . If it is listed, you have successfully
- Page 13 – Go to; Apple System Profiler > Devices and Volumes; . If you see the Enclosure Box; USB Information; , you have successfully installed the Enclosure Box.
- Page 14 – Removing the Enclosure Box Safely
- Page 15 – Note on USB Cable
- Page 16 – FCC and CE
- Page 17 – Technical Support
2.5” USB 2.0 Enclosure Box
Model # AEN-U25W
User’s Manual
Ver. 2.0
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Table of Contents 1. Introduction ................................................................................................................................. 3 1.1 Package Contents ..................................................................................................................
3 1. Introduction Thank you for purchasing this 2.5” USB 2.0 Enclosure Box. The Enclosure Box provides an easy way to add removable disk storage space to your computer. The Hi-Speed USB 2.0 interface ensures fast and reliable connection between the external drive and the computer. With the Hot Swap ...
4 2. Hard Drive Installation This section provides instructions on how to install a hard drive to the Enclosure Box. Step 1 Use the provided screwdriver to remove the four screws on the Enclosure Box. Step 2 Slightly lift the upper cover and slide it forward to unhook the latches.
