Airlink101 AIC250 - Manuals

Section 4 Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard . Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.

Step 3 If the Camera’s default IP Address is on a different subnet, the following message will appear. Click Yes to continue. Note: If you do not receive this message, skip to Step 9 . Step 5 In the IP Address field, change the first three numbers to match your local network address. For example : I...

Step 11 If you need to change the Camera’s IP Address because another network device is already using the same address, you can assign a new address here and click Next . Step 12 Verify all the fields are correct and click Restart to save the settings and reboot the Camera.

Section 5 Viewing Images Step 1 At the Setup Wizard, select the desired camera from the list and click on the Web Config button. Step 2 The default page appears. You can view live video by selecting either the ActiveX Mode (Internet Explorer) or the Java Mode (Internet Explorer and Netscape). Note: ...

Note: ActiveX and/or Java Applet must be installed and enabled on your Web Browser(Internet Explorer or Netscape) before you can view the live videos. For more information,please refer to the User’s Manual on the provided CD. The IP Camera is ready for use now. Step 4 If you need to install Java Vir...