Airlink101 AP671W - Manuals

Step 2 Click Next to start the configuration. Step 3 Connect one end of a network cable to a LAN port (1~5) of the AP and connect the other end to a LAN port of the router. Power on the AP. Step 4 Make sure the LEDs of POWER , WLAN and the LAN port that is connected to the Router are lit. If not, tr...

Step 6 Configure the IP Address for your Access Point for future management use. Click Next . Step 7 Select an operation mode for your Access Point and click Next . The wizard will guide you to finish the following corresponding settings. Step 8 Configure the settings for the operation mode you have...

8.2 Universal Repeater Click on Site Survey , select the wireless router or AP you wish to repeat on the popup Wireless Site Survey window and click Connect . Configure a network name in Main SSID for the repeater to be identified. 8.3 AP Client Click on Site Survey , select the wireless router or A...