Adam Equipment 303669031 revision E4 - Manual
Adam Equipment 303669031 revision E4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – CONTENTS
- Page 6 – SPECIFICATIONS
- Page 8 – Stainless steel top pan
- Page 10 – KEYS; NUMERIC ENTRY METHOD; To set a value when required, use the keys as given below-
- Page 11 – SYMBOLS AND INDICATORS; Net; Weight
- Page 12 – BATTERY OPERATION; S3 AoF
- Page 13 – OPERATIONS; You can press the [Zero] key at any time to set the zero point; The scale has an automatic re-zeroing function to account for; Press [Tare] when the reading is stable. The weight that was; As a product is added only the weight of the product will be
- Page 14 – Mass on the balance is above the high limit
- Page 16 – SECURITY SEALS; Method of sealing
- Page 17 – CALIBRATION COUNTER; ” using the numeric entry method (see section; Remove all weight from the pan and then press the [Tare] key; when the scale is stable.
- Page 18 – The scale will calibrate to the mass and then return to weighing.; NOTE: If an error message “; FAIL H
- Page 19 – PARAMETER SETTING; CHECK WEIGHING PARAMETERS; ” in this section. Enter; Setting the LED
- Page 20 – These parameters are used to control the operation of the scale.
- Page 21 – DESCRIPTION; Err 4; High limit input error; FAIL H; or; FAIL L; Calibration error
- Page 22 – REPLACEMENT PARTS AND ACCESSORIES; Power Supply Module; SERVICE INFORMATION
- Page 23 – WARRANTY INFORMATION
- Page 24 – Adam Equipment
- Page 25 – APPENDIX
- Page 27 – FCC COMPLIANCE
© Adam Equipment Company 2013
Adam Equipment
WBW SERIES
WBW..M EC and WBW..aM NTEP
Type Approved
(P.N. 303669031, Revision E4, May 2013)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© Adam Equipment Company 2013 1 CONTENTS 1.0 INTRODUCTION ...................................................................................................... 3 2.0 SPECIFICATIONS .................................................................................................... 4 3.0 INSTALLATIO...
© Adam Equipment Company 2013 4 2.0 SPECIFICATIONS EC Type Approved Models (Type Approval Number T7476/TC7477) WBW 3M WBW 6M WBW 15M Kilograms Max 3 kg 6 kg 15 kg e = 0.001 kg 0.002 kg 0.005 kg Grams Max 3000 g 6000 g 15000 g e = 1 g 2 g 5 g NTEP Type Approved Models (Type Approavl number 10-082) WB...
© Adam Equipment Company 2013 6 3.0 INSTALLATION 3.1 UNPACKING Remove the scale from the packing carefully. Inside the box you will find everything needed to start using the scale- Pre-assembled scale Stainless steel top pan Power Supply Module Operators Manual 3.2 LOCATING • The scales should not b...
