Zanussi ZGG62414SA- User Manual

Page 2 - Contents; Subject to change without notice.; Safety information

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7...

Page 3 - Safety; Installation

• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire with water, but switch off the appli- ance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces.• Do not use a steam cleaner to clea...

Page 5 - Product description; Cooking surface layout; Daily use; Ignition of the burner

Product description Cooking surface layout 1 2 5 4 3 1 Semi-rapid burner 2 Semi-rapid burner 3 Control knobs 4 Auxiliary burner 5 Rapid burner Control knobs Symbol Description no gas supply / off posi-tion Symbol Description ignition position / maxi-mum gas supply minimum gas supply Daily use Warnin...

Page 6 - Turning the burner off; Helpful hints and tips; Energy savings

A B C D A) Burner cap B) Burner crown C) Ignition candle D) Thermocouple Warning! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds,release the control knob, turn it into off positionand try to light the burner again after minimum1 minute. Im...

Page 7 - Care and cleaning; are not; Troubleshooting

Care and cleaning Warning! Refer to the Safety chapters. Warning! Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electricalsupply before you do cleaning or maintenancework. Scratches or dark stains on the surfacehave no effect on how the applianc...

Page 8 - Labels supplied with the accessories bag; Stick the adhesive labels as indicated below:; Stick it on instruction booklet

Problem Possible cause Remedy • Burner cap and crown are placed uneven • Make sure that the burner cap and crown are in correct posi-tions. The flame is blow out immediatelyafter ignition • Thermocouple is not heated sufficient • After lightning the flame, keep the knob pushed for approxi-mately 5 s...

Page 9 - Important safety requirements

Installation Warning! Refer to the Safety chapters. Warning! The gas settings of this appliance are not applicable for Cyprus. If you install this appliance in Cyprus, you mustchange the nozzles before you connect theappliance. To change the nozzles refer to thetype of gas used. See the tables in th...

Page 12 - Replacement of the connection cable; Install the appliance only on a; Possibilities for insertion; b) Space for connections; Kitchen unit with oven

To replace the connection cable use onlyH05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to thevoltage load and the working temperature. Theyellow/green earth wire (B) must be approxi-mately 2 cm longer than the live and neutralwire (A). A B Warning! A cut off plug in...

Page 13 - Gas burners

Technical information Hob dimensions Width: 580 mm Length: 500 mm Hob recess dimensions Width: 550 mm Length: 470 mm Heat input Rapid burner: 3.0 kW Semi-rapid burner: 2.0 kW Auxiliary burner: 1.0 kW TOTAL POWER: G20 (2H) 20 mbar = 8 kWG30 (3+) 28-30 mbar = 567 g/hG31 (3+) 37 mbar = 557 g/hG30/G31 (...

Page 14 - Environment concerns; Packaging material

BURNER NORMAL POWER RE- DUCED POWER NORMAL POWER NATURAL GAS G20 (2H) 20 mbar LPG (Butane/Propane) G30/G31 (3+) 28-30/37 mbar kW kW inj. 1/100 mm m³/h inj. 1/100 mm G30 28–30 mbar G31 37 mbar g/h g/h Rapid 3.0 (natural gas) 2.8 (LPG) 0.75 119 0.286 86 204 200 Gas burners for LPG G30/G31 30/30 mbar -...

Zanussi ZGG62414SA- User Manual

Table of Contents:

Summary

Other Zanussi Models