Zanussi ZHC 613 Manual - Free PDF Download

Page 2 - Guide to use the instruction book

2 Thank you for buying a Zanussi product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before usingthe appliance and retain for future reference. If you require guidance in the use of the appliance or require furtherinformation on Zanussi Pr...

Page 3 - IMPORTANT SAFETY INFORMATION; Installation

3 IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all beforeinstalling or using this appliance. Your safety is of paramount importance. If you are unsure about any ofthe meanings of these warnings contact the Customer Care Dep...

Page 4 - Cooker Hood Controls

4 YOUR APPLIANCE OPERATING INSTRUCTIONS The cooker hood is designed to extractunpleasant odours from the kitchen, it will notextract steam. The appliance can be installed torecirculate or extract contaminated air. Cooker Hood Controls The cooker hood functions are controlled bythree switches located...

Page 5 - To Operate; Recirculation

5 To Operate Select the required fan speed and light if required. Recirculation In the recirculation mode the contaminated air entersthe cooker hood through the grease filters. The air iscleaned by passing through the charcoal filtersbefore being passed back into the kitchen throughthe grilles in ei...

Page 6 - MAINTENANCE AND CLEANING; External Cleaning; Metal Grease Filters

6 MAINTENANCE AND CLEANING Before carrying out any maintenance orcleaning isolate the cooker hood from themains supply. The cooker hood must be kept clean, as abuild up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warmsoapy water using a mild detergen...

Page 7 - Charcoal Filters; Changing the Light Bulb

7 Charcoal Filters In the recirculation mode the charcoal filtersabsorb smells and unwanted odours. The charcoal filters cannot be cleaned, werecommend they should be replacedapproximately every three months or more oftenif the hood is used for more than three hours perday. To Remove/Replace theChar...

Page 8 - Symptom; The cooker hood will not start; Solution

8 SOMETHING NOT WORKING SERVICE AND SPARE PARTS If, having followed these instructions carefully, your cooker hood fails to work properly please carry outthe following checks. Symptom The cooker hood will not start The cooker hood is not working effectively The cooker hood has switched off duringope...

Page 9 - GUARANTEE CONDITIONS; EXCLUSIONS; This Guarantee does not cover:; ZANUSSI EUROPEAN GUARANTEE

9 GUARANTEE CONDITIONS We Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in applianceor any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will,at our option repair or replace the same FREE OF...

Page 10 - INSTALLATION INSTRUCTIONS; ELECTRICAL CONNECTIONS; Electrical Requirements

10 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical InformationDIMENSIONS HEIGHT OF CANOPY: 24cm HEIGHT OF CHIMNEY: (UPPER SECTION) 40cm (LOWER SECTION) 56cm WIDTH OF CANOPY - ZHC 613: 59,8cm WIDTH OF CANOPY - ZHC 913: 89,8...

Page 11 - INSTALLING THE COOKER HOOD; Installation Requirements; The cooker hood is supplied with the following; Fixing kit comprising:

11 INSTALLING THE COOKER HOOD Please ensure that when the appliance isinstalled it is easily accessible to anengineer in the event of a breakdown. All installations must comply with the localauthorities requirements for the discharge ofexhaust air. Incorrect installation may affect the safety ofthis...

Page 12 - Clearance Height; lower bracket; upper bracket

12 A: Built-in Electric Hob: 650mm minimum clearance B: Built-in Gas hob: 700mm minimum clearance C: Slot-in Electric Cooker: 685mm minimum clearanceD: Slot-in Gas Cooker: 787mm minimum clearance Hob Clearance Height The cooker hood is designed to be fitted over acooking appliance at the clearance h...

Page 13 - middle bracket; Note: If the hood is to be installed onto a hollow; Fitting the Canopy Hood

13 4. Draw a horizontal line through the vertical lineat X . X is a distance between the centre of the top and bottom fixing holes on the upperchimney stack. Mark the centre positions forthe middle bracket fixing screws (3) at 95mm either of the vertical line (screws not supplied) . 5. Drill the hol...

Page 15 - Fitting the Chimney Stack

15 Fitting the Chimney Stack The chimney stack consists of two sections. 1. Fit the upper section (S) first. Expand thechimney slightly to allow it to be fitted overthe brackets (1) and (2), and then securethe chimney stack to bracket (2) using twoself tapping screws provided in the fittingkit. 2. F...