Zanussi ZFU27400WA- User Manual

Page 2 - Children and vulnerable people safety

Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _...

Page 5 - Switching on

Product description 1 4 2 3 5 1 Thermostat 2 Flaps 3 Freezer baskets 4 Rating plate 5 Maxibox baskets Control panel 1 2 3 4 5 1 Alarm Light 2 Fast Freeze Indicator 3 Fast Freeze Switch 4 Pilot Light 5 Temperature Regulator Switching on Insert the plug into the wall socket.Turn the Temperature regula...

Page 6 - Daily use

Temperature regulation The temperature is automatically regulated.To operate the appliance, proceed as follows: • turn the Temperature regulator toward lower settings to obtain the minimum coldness. • turn the Temperature regulator toward higher settings to obtain the maximum coldness. The intermedi...

Page 7 - First use; Cleaning the interior; Helpful hints and tips; Normal Operating Sounds

1 2 First use Cleaning the interior Before using the appliance for the first time,wash the interior and all internal accessorieswith lukewarm water and some neutral soap so as to remove the typical smell of a brand-newproduct, then dry thoroughly. Important! Do not use detergents or abrasive powders...

Page 8 - Care and cleaning; Periodic cleaning

• make sure that the commercially frozen food- stuffs were adequately stored by the retailer; • be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the short-est possible time; • not open the door frequently or leave it open longer than absolutely necessary; • once de...

Page 9 - Troubleshooting; Before troubleshooting,

Activate the Fast Freeze function for somehours so that it can reach the sufficient storingtemperature as soon as possible. Caution! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanicaldevice or any artificial means to speed up thethawin...

Page 10 - Technical data; carefully for your safety and correct; Positioning

Problem Possible cause Solution The temperature in thefreezer is too high. The temperature regulator is not setcorrectly. Set a lower temperature. Many products are stored at thesame time. Store less products at the sametime. Products are too near to each oth-er. Store products so that there is cold...

Page 13 - Environmental concerns

A B 7. Unscrew the pin(A) and screw it onthe opposite side.8. Remove the cap(B) and position it onthe opposite side.9. Screw the lowerhinges.10. Refit the plinth. 11. Stand the appli-ance upright.12. Fit the handle onthe opposite side andput the plastic caps(contained in the in-structions bag) in th...

Zanussi ZFU27400WA- User Manual

Table of Contents:

Summary

Other Zanussi Models