Xerox 7232 - Manual

Xerox 7232

Xerox 7232 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
188 Page 188
189 Page 189
190 Page 190
191 Page 191
192 Page 192
193 Page 193
194 Page 194
195 Page 195
196 Page 196
197 Page 197
198 Page 198
199 Page 199
200 Page 200
201 Page 201
202 Page 202
203 Page 203
204 Page 204
205 Page 205
206 Page 206
207 Page 207
208 Page 208
209 Page 209
210 Page 210
211 Page 211
212 Page 212
213 Page 213
214 Page 214
215 Page 215
216 Page 216
217 Page 217
218 Page 218
219 Page 219
220 Page 220
221 Page 221
222 Page 222
Page: / 222

Table of Contents:

  • Page 3 – Table of Contents
  • Page 9 – Backing Up XSA data and settings and Cloning to another device . 213
  • Page 11 – Before Using the Machine; Welcome to the Xerox family of WorkCentre products.; Xerox Welcome Center; Welcome Center or local representative telephone number:; Serial Number; For your convenience, record the serial number in the space below.
  • Page 12 – Languages Displayed on the Touch Screen; You can change the languages in the following two ways.; Conventions; Paper is synonymous with media.; Key Operator/System Administrator
  • Page 13 – Press the switch to the position to switch the machine on.; Italic Typeface; Machine Status – page 28.; Warnings
  • Page 14 – Cautions; Notes are statements that provide additional information.
  • Page 15 – Product Overview; Detailed information is provided in the following sections.; Machine Components
  • Page 16 – Telephone socket
  • Page 17 – Integrated Office Finisher; paper in Letter or A4 size, long edge feed. Tray 3 can hold 1,200
  • Page 18 – Allows you to load up to 2,000 sheets of 20 lb bond or 80 g/m; Services and Features; screen can be changed by the Key Operator.; Copy
  • Page 19 – Powering On; If the machine does not start
  • Page 20 – Powering Off; Cabling; Interface Ports
  • Page 21 – Modes; All Services
  • Page 22 – Active Jobs
  • Page 23 – Pop-up Menu for Stored Documents; Release – Prints a stored document.; Completed Jobs; Identifies each job by job number and type.; Remote Terminal/Contents
  • Page 24 – Result; Allows you to display only the selected type of jobs.; Job Attributes; Secure Print Jobs & More; information, refer to PCL Driver Online Help.; Charge Print
  • Page 25 – Private Charge Print
  • Page 26 – Sample Set
  • Page 27 – Delayed Print
  • Page 28 – Machine Status; For more information on each feature, refer to the following.; Machine Information
  • Page 29 – Select the required option.; Paper Tray Status; This feature displays the overwriting status of the hard disk.; Print Mode; Select the required option.
  • Page 30 – Fax Receiving Mode; Billing Information
  • Page 31 – Print Reports
  • Page 32 – – Fax Comments List – Lists the comments saved for use on cover notes.
  • Page 33 – User Account Billing Information
  • Page 34 – Faults; System Controls; Button
  • Page 35 – Settings in the Key Operator Mode
  • Page 36 – System Settings
  • Page 37 – Printing a Configuration Report; Follow these steps to print a configuration report:; Changing the Settings; Entering the Key Operator Mode; Select a group in the menu.; Exiting the Key Operator Mode
  • Page 38 – Ethernet Port; The Ethernet port is the default interface used on the machine.; Auto
  • Page 39 – Resident Fonts; PCL Resident Fonts; You can view the PCL fonts by printing the Fonts List.; Value
  • Page 40 – Symbol Set
  • Page 41 – Code
  • Page 43 – Prerequisites for Quick Network Setup Using TCP/IP; The Ethernet cable is an RJ45 type and is not supplied by Xerox.; Configuring an IP Address via DHCP; Procedure for Quick Network Setup Using TCP/IP; Power on the machine.
  • Page 44 – Record the IP address allocated.; Procedure for Manual Setup of Network Using Static IP Address
  • Page 45 – Using the same method as in step 11, enter the Subnet Mask.
  • Page 47 – CentreWare Internet Services; Information Checklist; the Problem; Item
  • Page 48 – CentreWare Internet Services Environments; User ID and Passcode; CentreWare Internet Services Installation; Installation Procedure; OS
  • Page 49 – Network Communication Setup; Initially, boot the CentreWare Internet Services port.
  • Page 51 – Test Access; Follow the steps below to access CentreWare Internet Services.; Selecting Transport Protocols; Select the required transport protocol.
  • Page 52 – The default user ID is “11111” and the default passcode is “x-admin”.
  • Page 53 – This page allows you to configure the Ethernet settings.
  • Page 54 – USB; This page allows you to configure the USB settings.
  • Page 55 – EtherTalk
  • Page 58 – Domain Name – Enter the domain name.
  • Page 59 – Domain Name 1 - 3 – Enter the domain names for the domain name 1 to 3.; SNMP Configuration; This page allows you to configure the SNMP settings.
  • Page 62 – SSDP; This page allows you to configure the SSDP settings.
  • Page 63 – Microsoft Networking; WINS Server
  • Page 64 – LPD
  • Page 65 – This page allows you to configure the Port9100 settings.
  • Page 66 – SMTP Server; Required Information:
  • Page 67 – LDAP; LDAP Server
  • Page 68 – LDAP User Mappings
  • Page 69 – LDAP Group Access; POP3 Setup
  • Page 70 – HTTP
  • Page 71 – Proxy Server
  • Page 72 – IPP
  • Page 73 – UPnP Discovery
  • Page 74 – Bonjour
  • Page 76 – Machine Software Upgrades; Prepare for the upgrade; Download the software file:; At your workstation; The Manual Upgrade link provides the ability to upgrade software
  • Page 77 – NetWare; If problems arise during the machine installation, refer to; Only the IPv4 format is available for the addresses.
  • Page 78 – NetWare Environments; System configuration; The machine does not support RPrinter mode.; Target computers; NetWare versions; the LPD port on the machine and set the IP address.
  • Page 79 – NetWare Installation; Network Communication Setup on page 79; NetWare Setup; NetWare Setup on page 81; Workstation Setup; Workstation Setup on page 81; Test Print; Test Print on page 81
  • Page 80 – CentreWare Internet Services.
  • Page 82 – The installation process is now complete.
  • Page 84 – UNIX TCP/IP Environments; The target computers are as follows.; Interface; The LPD is available on the following interfaces:; UNIX TCP/IP Installation; There are three stages.; The machine needs to be set up and configured for TCP/IP.; The workstation OS needs to be configured for the machine.
  • Page 86 – allowed to access the machine.
  • Page 87 – the touch screen of the machine is used.; Printer Name
  • Page 88 – Solaris; Log in as root at a client workstation.
  • Page 89 – SunOS; ping PrinterName
  • Page 90 – mkdir PrinterName; Using the Command Window TTY Method
  • Page 91 – Test Print on page 92; Using the System Administrator Manager (SAM) GUI Method
  • Page 92 – the Problem Solving chapter; Printing; Command format
  • Page 93 – • -n number of copies; Example; The cancel command is used to delete print data.; The following command options are available.
  • Page 94 – deleted file by file. All the files will be deleted together.; The lpr command is used to print.
  • Page 95 – • job number
  • Page 96 – Printer Status
  • Page 97 – This option displays all the information.; The lpq command is used to inquire about the status of the machine.
  • Page 98 – Long file names will be truncated.; Examples; Function; The following items can be set up using the -C option.; Selecting a paper tray; The following parameters can be specified.; Parameter
  • Page 99 – specified size of paper is not loaded.; Selecting a paper output tray
  • Page 102 – The system default is used if no parameter is specified.; Specifying stapling; The following parameters can be specified for stapling.; may not function correctly.
  • Page 103 – EtherTalk
  • Page 104 – EtherTalk Environments; EtherTalk Installation; This requires the machine to be set up for EtherTalk.; Keep the SNMP port enabled while you use the machine on the TCP/IP
  • Page 105 – Connect the machine to the network.; Open a sample document on a client workstation.
  • Page 107 – Microsoft Networking; If problems are encountered during the installation, refer to
  • Page 108 – SMB Environments; You can make SMB settings through CentreWare Internet Services.; The following computers support printing through SMB.; Connection
  • Page 109 – SMB Installation; The installation procedure is as follows.; Install the print driver on the computer.
  • Page 110 – Using the same method as in step 7, enter the Subnet Mask.
  • Page 113 – If problems are encountered during machine setup, refer to
  • Page 114 – The transport protocol for LPD and Port9100 can be TCP/IP.; Printing through LPD: LPD port
  • Page 116 – Using the same method as in step 6, enter the Subnet Mask.
  • Page 117 – Open a document on a client workstation.
  • Page 120 – USB Port Environment; The following computers support printing through the USB port.; USB Port Installation; USB Port Communication Setup; This requires the machine to be set up for USB port printing.
  • Page 122 – Test Print on page 122
  • Page 124 – IPP Environment; The transport protocol for IPP can be TCP/IP.; The following computers support IPP.; IPP Installation
  • Page 129 – You can send and receive E-mails using the machine.; Mail Notice Service
  • Page 130 – Notify Job End by E-mail
  • Page 131 – System Requirements; The following are required for the machine.
  • Page 132 – For each of the following items,; Test Mail
  • Page 137 – 3 Scanning Services; Scanning Overview; XPS stands for XML Paper Specification.; Scanning with the machine; fields when assigned using Scanning Services.
  • Page 138 – Scanning Process; Data to Set Up E-mail
  • Page 139 – Procedure for Scan to E-mail Setup; There are three ways to specify an e-mail destination:
  • Page 141 – Scan to E-mail Troubleshooting; Symptom
  • Page 142 – Scan to Mailbox Setup; Prerequisites for Scan to Mailbox Setup; Target Computers; Comments
  • Page 143 – Procedure for Scan to Mailbox Setup through the Control Panel
  • Page 144 – Network Scanning Setup; Prerequisites for Network Scanning Setup; For more details, refer to; Procedure for Network Scanning Setup; Load a sample document into the document feeder.; Data to Set Up Network Scanning
  • Page 145 – Remote Authentication Setup (If Required)
  • Page 146 – Remote Authentication Network Communication Setup
  • Page 147 – Repeat steps 8 and 9 for the Secondary Server settings.; Enabling Remote Authentication
  • Page 148 – Enter all the information required.
  • Page 151 – 4 Internet Fax; Internet Fax Overview
  • Page 152 – Internet Fax Environments; Internet Fax Installation
  • Page 153 – Test Internet Fax
  • Page 157 – Server Fax Overview
  • Page 158 – Server Fax Environments; Server Fax Installation
  • Page 159 – Using the same method as in step 9, enter the Subnet Mask.
  • Page 160 – Using the same method as in step 8, set the gateway address.; Server Fax Configuration; CentreWare Internet Services on page 47
  • Page 161 – Scan to E-mail Setup on page 138
  • Page 162 – Test Server Fax transmission; Make sure that the Server Fax feature is enabled.
  • Page 163 – Security Features Overview; Network Communication Security
  • Page 164 – Scan File Security; Encryption/Digital Signature for PDF/XPS Documents
  • Page 165 – Securing HTTP Communication with Encryption; Installation Overview; Configuration of the Machine
  • Page 166 – Creating a Self-Signed Certificate; Access CentreWare Internet Services.; Enabling and Setting SSL/TLS; Do not use the port numbers assigned to the other ports.
  • Page 167 – Setting E-mail Encryption/Digital Signature; Securing; Configuration of a Computer; Prepare a certificate for email encryption/digital signature.; Securing HTTP Communication with Encryption on page 165; Importing a Certificate into the Machine
  • Page 168 – Specifying the Certificate; Select the certificate from the list.; Enabling S/MIME Communication; The following describes how to configure a computer.
  • Page 169 – Supported e-mail applications
  • Page 170 – Setting PDF/XPS Signature
  • Page 171 – Refresh the web browser.; Configuring PDF/XPS Signature Settings
  • Page 172 – Configuring Xerox Secure Access (Authentication); Secure Access and Accounting
  • Page 173 – In the Authentication Configuration > Step 1 of 2 area:
  • Page 174 – Configure Remote Authentication for Kerberos (Windows 2000); Select Kerberos Server Settings.
  • Page 175 – Configure Remote Authentication for Kerberos (Solaris); Apply; , and supply the Administrator User name and password if prompted.
  • Page 176 – Enable Specific Xerox Secure Access Settings; Select the Properties tab.
  • Page 177 – Add the Secure Access to the Server; On Windows 2000 or XP, click Add a Printer.; Using Secure Access
  • Page 179 – 7 Problem Solving; Problem Solving Procedure; Check that the machine has power and it is switched on.
  • Page 180 – SMB; Troubleshooting; When the machine is not found from client computers; Cause
  • Page 181 – When printing fails
  • Page 182 – Other; Restrictions; Machine settings; The following actions take place when the machine is switched off.; Problem
  • Page 183 – When printing; When the client IP address or computer name is changed:; Printing using an SMB environment
  • Page 184 – Authentication using SMB
  • Page 185 – NetWare
  • Page 188 – When a switch off/on message is displayed
  • Page 189 – UNIX
  • Page 190 – When the required printing result is not obtained
  • Page 191 – When using Windows 95/Windows 98/Windows Me
  • Page 193 – When using Macintosh OS X
  • Page 194 – When the machine is switched off
  • Page 196 – Machine Name; Name Change Rules; The machine name is changed as follows:; Zone Name
  • Page 197 – This section explains some aspects of using Bonjour.; Bonjour operating environment
  • Page 198 – CentreWare Internet Services
  • Page 199 – Scanning Services; When SMB transmission to Windows Server 2003 fails
  • Page 200 – refer to the Readme file on the driver CD-ROM.; When retrieving a document from a mailbox
  • Page 201 – Write capacity limit
  • Page 203 – Internet/Intranet Connection; When you cannot connect to the Internet/intranet
  • Page 205 – When you cannot connect to a web server; Internet/Intranet connections; Windows 2000, Windows XP, Windows Server 2003 or Windows Vista
  • Page 207 – Enable Network Authentication
  • Page 209 – Xerox Standard Accounting; Overview; Each device supports unique XSA User IDs and Group Accounts.; Installation Checklist; Ensure that your device is fully functioning on the network.
  • Page 210 – Enable Xerox Standard Accounting (from Internet Services); At your Workstation; Reboot the machine at the prompt.; Create a Group Account; Click the [Group Accounts] link to create a new group account.; Create a User Account and Set Usage Limits; Up to 9999 User ID’s can be registered.
  • Page 211 – Maximum Usage Limits and Resetting Individual Usage Limits; The system administrator has unlimited access to the machine.; Using XSA at the machine; Enable Xerox; At the Machine; button, if necessary, to display all the available service
  • Page 212 – asked to select the account that they wish to log into.; Resetting Usage Data; users, accounts and usage data from your machine.; Print a Usage Report; Enable XSA in your Print Drivers
  • Page 213 – Backing Up XSA data and settings and Cloning to another device; Check that the device you want to clone settings to supports XSA; Click the [Xerox Standard Accounting] folder in the directory tree.; To make a Back-up file; network for several minutes.
  • Page 214 – It may be necessary for you to use your web browser to view the Xerox
  • Page 215 – Terms Defined
Loading the manual

System Administrator Guide

701P47545

WorkCentre

7232/7242

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Table of Contents

Xerox WorkCentre 7232/7242 System Administration Guide 3 Table of Contents 1 Before Using the Machine ................................................................... 11 Xerox Welcome Center .......................................................................... 11 Serial Number .................

Page 9 - Backing Up XSA data and settings and Cloning to another device . 213

Xerox WorkCentre 7232/7242 System Administration Guide 9 Troubleshooting ............................................................................... 199 Restrictions ...................................................................................... 200 E-mail Services ..........................

Page 11 - Before Using the Machine; Welcome to the Xerox family of WorkCentre products.; Xerox Welcome Center; Welcome Center or local representative telephone number:; Serial Number; For your convenience, record the serial number in the space below.

Xerox WorkCentre 7232/7242 System Administrator Guide 11 1 Before Using the Machine Welcome to the Xerox family of WorkCentre products. This System Administration Guide provides detailed information, technical specifications and procedures for using the integral features of the machine. Xerox Welcom...

Other Xerox Models

All Xerox Other

We regularly update our database with new manuals, so you can find the device model you need and read the PDF manual online.

Use the search and site navigation. If you haven't found what you're looking for or didn't get an answer to your question, contact us through the contact form.

Menu
Info
© 2026 manualsarea.com Privacy Policy