WEN 20496 - User Manual

5 GENERAL SAFETY RULES 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool ...

6 PORTABLE BAND SAW SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. PORTABLE BAND SAW SAFETY 1. Work Environment. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk ...

7 PORTABLE BAND SAW SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. KICKBACK AND RELATED WARNINGS Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other acces- ...

8 ELECTRICAL INFORMATION (CHARGER) AMPERAGE REQUIRED GAUGE FOR EXTENSION CORDS 25 ft. 50 ft. 100 ft. 150 ft. 2A 18 gauge 16 gauge 16 gauge 14 gauge IMPORTANT: Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personne...

• Avoid dangerous environments – Do not charge the battery pack in rain, snow or in damp or wet locations. Do not use the battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust or flam- mable materials) because sparks may be generated when inserting or removing the bat...

BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time.2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.3. Lithium-ion batteries are subject to a natural...

Components 11 Accessories UNPACKING & PACKING LIST UNPACKING Carefully remove the portable band saw from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list belo...

KNOW YOUR PORTABLE BAND SAW PORTABLE BAND SAW Refer to the following diagrams to become familiarized with all the parts and controls of your portable band saw. The components will be referred to later in the manual for assembly and operation instructions. Guide Bar 5.0Ah Battery Pack Front Handle LE...

ASSEMBLY & ADJUSTMENTS WARNING! To avoid injury from accidental startups, be sure that the tool is switched off and disconnected from the power supply before inspecting the unit, making adjustments, or changing accessories. 13 CHARGING THE BATTERY PACK The 20V battery pack for this tool is suppl...

ASSEMBLY & ADJUSTMENTS 1 Fig. 3 14 INSTALLING SAW BLADE Your band saw is designed to fit saw blades 44-7/8” long, 1/2” wide and 0.025” thick. Use the correct blade size suitable for the mate- rial being cut. A 10/14 TPI saw blade is included with your saw. Replacement blades can be ordered from ...

OPERATION OPERATING THE SAW 1. Hold the tool firmly with both hands on the insulated handles. With the workpiece secured, set the guide bar (Fig. 4 - 3) against the workpiece, keeping blade at a 90° angle to the workpiece.2. Press the lock-off button, then the ON / OFF trigger (Fig. 4 - 1) to turn o...

MAINTENANCE WARNING! To avoid accidents, make sure the power switch is in the OFF position and remove the battery be- fore cleaning or performing any maintenance. Servicing of the tool must be performed by a qualified technician. GENERAL MAINTENANCE 1. Before each use, inspect the general condition ...

EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty. 17

EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. 1 94396-001 Front Handle 1 2 Nut, M8 1 3 Bolt, M8x70 1 4 Lock Nut, M6 4 5 Handle Base 1 6 Self-tapping Screw, ST4x16 6 7 Battery Terminal 1 8 Socket Head Cap Screw, M6x14 16 9 Left Handle 1 10 Switch Lock Button 1 11 Electronics Assembly 1...

WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser on...