Page 2 - can be purchased from wenproducts.com
TABLE OF CONTENTS Specifications ......................................................................................... 2Introduction ........................................................................................... 3General Safety Rules ....................................................
Page 3 - INTRODUCTION; frequently to maximize safety for both yourself and others.
INTRODUCTION Thanks for purchasing the WEN portable band saw. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool....
Page 4 - GENERAL SAFETY RULES; SAVE THESE SAFETY INSTRUCTIONS.; WORK AREA SAFETY; ELECTRICAL SAFETY
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such ...
Page 5 - POWER TOOL USE AND CARE
GENERAL SAFETY RULES POWER TOOL USE AND CARE 1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a power source or carrying the tool. 2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper ...
Page 6 - SPECIFIC RULES FOR YOUR PORTABLE BAND SAW
SPECIFIC RULES FOR YOUR PORTABLE BAND SAW 1. WORK ENVIRONMENT. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk of electrical shock. Do not operate the tool in the presence of flammable liquids or gases; sparks generated by the grinder could ignite these f...
Page 7 - KICKBACK AND RELATED WARNINGS; VIBRATION SAFETY
SPECIFIC RULES FOR YOUR PORTABLE BAND SAW 11. MAINTAINING AND MAKING ADJUSTMENTS. Always turn off and unplug the tool before cleaning, making adjustments or changing attachments. Accidental start-ups may occur if the tool is plugged in during an accessory change or adjustment. KICKBACK AND RELATED W...
Page 8 - ELECTRICAL INFORMATION; GUIDELINES AND RECOMMENDATIONS FOR EXTENSION CORDS; AMPERAGE; GROUNDING INSTRUCTIONS
ELECTRICAL INFORMATION 1. Examine extension cord before use. Make sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. 2. Do not abuse extension cord. Do not pull on cord to disconnect fro...
Page 9 - KNOW YOUR PORTABLE BAND SAW
Carefully remove the tool and all contents from the packaging. Check all components against the diagram below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at [email protected]. Do not discard the packaging until the saw is complet...
Page 10 - PREPARATION & ADJUSTMENTS
PREPARATION & ADJUSTMENTS WARNING: To prevent injury from accidental operation, turn OFF and unplug the tool from the power source before assembling or making any adjustments to the tool. INSTALLING SAW BLADE (FIG. 2) Your band saw is designed to fit saw blades 44-7/8” long, 1/2” wide and 0.025”...
Page 11 - WORK AREA & WORKPIECE SET UP
PREPARATION & ADJUSTMENTS REMOVING THE BLADE (FIG. 4) 1. Make sure the saw is switched off and the power is disconnected. 2. Turn the tension handle (Fig. 4 - 1) clockwise to release blade tension. 3. Wearing work gloves and safety goggles, carefully slide the blade off the top of the guide whee...
Page 12 - OPERATION
OPERATION OPERATION (FIG. 5) 1. Hold the tool firmly with both hands on the insulated handles. With the workpiece secured, set the guide bar (Fig. 5 - 4) against the workpiece, keeping blade at a 90° angle to the workpiece. 2. Press the ON/OFF trigger (Fig. 5 - 1) to turn on the band saw. Use the sp...
Page 13 - MAINTENANCE; GENERAL MAINTENANCE
MAINTENANCE GENERAL MAINTENANCE 1. Before each use, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, damaged cords or electrical wiring, cracked or broken parts, and any other conditions that may affect its safe operation. 2. After every o...
Page 14 - TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION Motor will not start 1. Power cord or extension cord damaged or power plug not properly plugged in 2. No power at outlet 3. Defective power switch, defective motor, short circuit in motor or loose connections 4. Carbon brushes not properly installed. 1. Check the powe...
Page 15 - EXPLODED VIEW
EXPLODED VIEW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 7 24 19 7 19 20 21 22 23 24 25 26 27 28 29 90 30 19 31 32 33 34 35 36 37 38 87 39 40 41 38 40 42 43 44 45 46 47 48 49 50 51 52 53 5455 56 10 24 25 70 78 5758 59 60 616263 19 19 67 64 6566 67 68 69 23 70 71 72 737475 7677 38 24 78 7965 80 81 ...
Page 16 - PARTS LIST
NO. PART NO. DESCRIPTION QTY. 1 94396-001 Front Handle 1 2 94396-002 Nut M8 1 3 94396-003 Locking Nut 4 4 94396-004 Handle Base 1 5 94396-005 Screw M8×70 1 6 94396-006 Light Back Cover 1 7 94396-007 LED Light 1 8 94396-008 LED Cover 1 9 94396-009 Light Base 1 10 94396-010 Screw M4×8 6 11 94396-011 L...
Page 17 - WARRANTY STATEMENT
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser on...
Page 18 - NOTES
