V-ZUG WAASLQWPZ - User Manual
V-ZUG WAASLQWPZ Washing Machine – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Failure to carry out step 3 can result in error messages.
- Page 3 – Installation plate; Positioning the installation plate; Dampen the mounting slots
- Page 4 – Variant 1
- Page 5 – Installation instructions; Local water authority regulations must be observed.; Water inlet; Hose clamp
- Page 6 – The mains plug must not be cut off.; Connection cable; Disconnect the appliance from the mains and control the wiring.
- Page 7 – Work steps
Installation instructions
Washing machine
One-family household
1014123-R03
31/10/2017
1014123-R03
1
For Service and Spare Part Information please contact: V-ZUG AUSTRALIA Pty. Ltd. Tel +61 7 3209 6822
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models:
L
(
11010), S (11011), SL (11012), SLQ (11013), SLQ WP (11014)
Identification plate
1
▸
Open the drain tray below the appliance door (see «1. Opening
the appliance door»)
–
Identification plate
1
Transport
If the weight of the appliance is greater than your lifting capacity, the appliance must be transported by several
people or using a transport aid. The weight of the appliance is given on the appliance packaging and in the operating
instructions.
Transport the appliance in an upright position only! Transporting it in any other position will cause damage. When
carried carefully without being shaken, the appliance may be tilted a maximum of 90° to the right (viewed from the
front).
Applicable only to model SLQ WP:
In the event that the appliance is tilted during transportation or installation it must not be put into operation for 2
hours.
Installation accessories supplied
The necessary installation accessories are located in the washing drum and in the appliance packaging.
Designation
Article no.
Number
See installation step
Installation set, incl.:
▪
Rubber stopper
▪
Screw material
▪
External drain hose
▪
Wire hose clamp
▪
Hose support
W41152
1
2
2. Removing the transport lock
1
4. Positioning the installation plate
1
5. Plumbing in
1
5. Plumbing in
1
5. Plumbing in
Installation plate (incl. double-sided
adhesive tape)
W40653
1
4. Positioning the installation plate
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 2 1. Opening the appliance door (without power) A 1a B 1b A B C 2 A D 1a Open drain tray A by pressing it at thebottom. Or1b Remove liquid-detergentflap B from detergent dis- penser drawer C and open dra...
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 3 3. Dimensions The stated dimensions do not include distances from walls. To prevent disturbing noise and vibration the appliancesmust not come into contact with the surrounding walls of their installat...
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 4 Free-standing position If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between the in-stallation plates and to the walls at the side and min. 45 mm to ...
