V-ZUG AW2THWL - User Manual

1 Safety warnings 6 1.4 Instructions for use Before using for the first time ▪ The appliance must be installed andconnected to the electricity supply inaccordance with the separate installa-tion instructions. Have a qualified fitter/electrician carry out the necessarywork. ▪ If connected to the wate...

2 Using for the first time The appliance must be installed and connected to the electricity supply in accord-ance with the separate installation instructions. Have a qualified fitter/electriciancarry out the necessary work. 2.1 Transport lock Remove the transport lock (hexagon head screws at the bac...

3 Appliance description 3.2 Operating and display elements Operating panel 3 1 2 4 4 4 4 1 Operating panel Buttons 2 V-ZUG-Home display Door opener 3 TouchDisplay Without function 4 Indicator lights Without function Programmes for normally soiled cot-ton load Start/Pause/Drum illumination End of pro...

4 Programme overview 3.3 Indicator lights Indicator light Activity State Indicator light is il-luminated. Function is active. Indicator light isflashing. Function is selectable. Indicator light isnot illuminated. Function is not selectable. 3.4 Button state Background colour Symbol colour State Blue...

4 Programme overview Additional functions Load capacity AquaPlus: There are 4 different settings for rinsing intensity. Standard: Normal water level. more water: Increased water level during the main wash and rinsing. + 1 rinse: An additional rinsing cycle. more water + 1 rinse: Increased water leve...

5 Operating the appliance 5 Operating the appliance 5.1 Preparations ▸ Check the foreign body trap is inserted correctly (see page 29). ▸ Insert the mains plug into a mains socket. ▸ Turn on water tap. ▸ Touch the button to open the appliance door. 5.2 Loading the washing ▸ Load up to a maximum of 8...

5 Operating the appliance 5.3 Adding washing detergent Liquid detergent 1 b a ▸ Pull the detergent dispenser drawer out as far as it will go. ▸ Pull flap 1 upwards and out of position a and insert in position b . Do not fill liquid detergent past the upper mark. Liquid detergent can only be usedfor ...

5 Operating the appliance 5.4 Detergent dosage Adding too much washing detergent can cause excess foaming. The con-sequences: poor wash results, damage to the appliance in the worst case. The correct dosage depends on the degree of soiling, the wash load, the water hardnessand the product used. Foll...

5 Operating the appliance Textile programmes ▸ Touch the button. – The selection of textile programmesappears in the TouchDisplay. Tex tile programmes C o l o u r e d s H a n d wa s h Wo l l e n s 1/1 1/1 ▸ Touch the button repeatedly until the de- sired textile programme is displayed. Shirts ▸ Touc...

5 Operating the appliance 5.8 Delayed start Selecting programme end time The option «Programme end» must be enabled in the user settings under «Delayedstart». (see page 24) 60 ▸ Touch the button for the desired pro- gramme. ▸ Touch the button. – The input field for the programmeend time appears in t...

5 Operating the appliance 5.10 Correcting entry During programme selection, entries can be corrected as follows: Clearing entries in the current view ▸ Touch the button. – Entries will be cancelled. The previous TouchDisplay appears. Clearing all entries ▸ Touch the button repeatedly until the Touch...

5 Operating the appliance Aborting programme / opening appliance door at end of programme ▸ Touch the button. – The input field for the code appearsin the TouchDisplay. Childproof lock 0 1 2 3 4 5 6 7 8 9 0 0 0 Code 731 ▸ Touch the digits 7, 3, 1 in sequence. ▸ Touch the button. – The appliance is u...

5 Operating the appliance 5.15 End of programme Unloading the washing before time Shortly before the end of the programme, the washing is loosened up. This takes about1–2 minutes. If steam anti-crease has been selected, the loosening-up period is extended toabout 60 minutes to further prevent creasi...

6 Favourites Hygiene recommendation Washing almost exclusively with low temperatures will result in the formation of foulsmelling coatings in the appliance. To prevent this, a «Hygiene recommendation» indicates when a wash of at least 60° C isrecommended for hygiene reasons. ▸ Touch the button.▸ Run...

6 Favourites 6.2 Changing favourites ▸ Touch the button. – The appliance door opens. ▸ Touch the button. 60°C ▸ Touch the favourite programme to be changed. Change ▸ Touch the button.▸ Make the changes. ▸ Touch the button. Yes ▸ Touch the button to save the favourite programme. No ▸ Touch the button...

7 V-ZUG-Home 7 V-ZUG-Home Your appliance is networkable. You can find further information under www.vzug.com . 8 User settings Providing no programme is running and no error messages are displayed, the usersettings can be changed. 8.1 Customizing user settings ▸ Close the appliance door. E x tr a 10...

9 Demo mode 9 Demo mode The appliance can be fully operated in the demo mode, but it will not wash. The demo mode can only be switched on or off when the appliance door is open. 9.1 Switching on ▸ Touch the button. – The appliance door opens. ▸ Simultaneously depress the buttons for 5 seconds until ...

10 Care and maintenance 10 Care and maintenance Using the correct dosage of detergent will automatically clean the inside of the appli-ance. Immediately wipe away all traces of detergent with a soft cloth to avoid staining. 10.1 Cleaning intervals Appliance part Cleaning interval Detergent dispenser...

10 Care and maintenance 10.4 Emergency draining The water in the appliance may be hot. Scalding hazard! Allow to cool down beforeemergency draining. In the event of a blocked water outlet or drain pump, a malfunction or a power failure, ifthere is water still in the appliance it must be drained off ...

10 Care and maintenance 10.7 Opening the appliance door in the event of a power failure Wait until the washing drum is completely stationary. A washing drum that is stillrotating poses a risk of serious injury. ▸ Close the water tap and disconnect the appliance from the mains. ▸ Open the drain tray ...

11 Trouble-shooting 11 Trouble-shooting You may be able to trouble-shoot the following malfunctions yourself. If not, note downthe error message in full (message, F and E numbers) and call Customer Services. 11.1 Error messages Display Possible cause Solution A2 Check water outlet ▪ The foreign body...

11 Trouble-shooting Display Possible cause Solution Inlet water verycold:Heating extended ▪ Inlet water is very cold.Heating is extended. ▸ No action is necessary. Too many items:Heating extended ▪ The selected pro-gramme is intended fora smaller load. Heatingand possibly rinsing isextended. ▸ Adjus...

11 Trouble-shooting Problem Possible cause Solution The programmetakes significantlylonger than indic-ated. The programme timesgiven serve only as aguide. The duration can beextended by, for example,the following factors: ▸ Further information can be found in the section on «Consumption val-ues» (se...

12 Spare parts Result Possible cause Solution Fabric wear ▪ Washing drum over-loaded ▸ Put less laundry into the washing drum (see page 13). ▪ Friction between fabricsduring washing. ▸ Select additional function «Easy care». ▪ Pilling ▸ Turn items inside out before wash- ing. 12 Spare parts Please g...

14 Washing tips 13.3 VAS Vibration Absorbing System As the washing drum starts to spin, if the control system detects that the load is out ofbalance it will interrupt the spinning action once or more. In this case, the appliance triesto improve the distribution of the wash load in the washing drum.W...

15 Disposal 14.2 Avoiding damage ▪ Follow the fabric care symbols on garment labels. ▪ The wash temperature selected should agree with the recommended temperaturerange of the washing detergent to ensure the washing detergent is at its most effect-ive. ▪ Wash white and coloured textiles separately. ▪...

16 Index A Aborting Programme entry .........................................  18Running programme ............................  18, 19 Additional functions ......................................... 11 Starting...........................................................  16 Appliance disposal ..........

17 Service & Support 17 Service & Support The «Trouble-shooting» section gives you valuable tips on how to deal with minormalfunctions yourself, saving you the time and trouble of calling out a service tech-nician and any cost that goes along with it. Information on the V-ZUG warranty can be...

Quick instructions Please first read the safety precautions in the operating instructions. ▸ Switch on appliance and turn on water tap.▸ Press the button. Appliance door opens. ▸ Load laundry.▸ Add washing detergent to detergent dispenser drawer.▸ Select programme and any additional functions (if re...