Page 2 - Failure to carry out step 3 can result in error messages.
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 2 1. Opening the appliance door (without power) A 1a B 1b A B C 2 A D 1a Open drain tray A by pressing it at thebottom. Or1b Remove liquid-detergentflap B from detergent dis- penser drawer C and open dra...
Page 3 - Installation plate; Positioning the installation plate; Dampen the mounting slots
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 3 3. Dimensions The stated dimensions do not include distances from walls. To prevent disturbing noise and vibration the appliancesmust not come into contact with the surrounding walls of their installat...
Page 4 - Variant 1
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 4 Free-standing position If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between the in-stallation plates and to the walls at the side and min. 45 mm to ...
Page 5 - Installation instructions; Local water authority regulations must be observed.; Water inlet; Hose clamp
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 5 5. Levelling To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the installation plate and notwobble. S W ▸ Roughly adjust the height of the front and rear adjuste...
Page 6 - The mains plug must not be cut off.; Connection cable; Disconnect the appliance from the mains and control the wiring.
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 6 7. Electrical connections Electrical connections Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standardsfor low-voltage installations and the s...
Page 7 - Work steps
Installation instructions Washing machineOne-family household 1014123-R03 31/10/2017 1014123-R03 7 8. Using for the first time Work steps which do not have to be taken are marked as follows: – Perform stability check Strong vibrations are deliberately produced during the stability check in order to ...