Smeg SRV876AV9 - User Manual

Smeg SRV876AV9

Smeg SRV876AV9 Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
Page: / 18

Table of Contents:

  • Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
  • Page 3 – DO NOT PUT; The manufacturer declines all responsibility
  • Page 4 – Instructions for the installer; POSITIONING OF THE HOB; must be carried out by a competent tradesman.; Attachment to support structure; on the inner side
  • Page 5 – In case of installation on a hollow compartment with doors, a
  • Page 6 – ELECTRICAL CONNECTION; not be less than 1.0 mm
  • Page 7 – GAS CONNECTION; rigid copper; The flexible pipe has to be installed so that pipe length does not
  • Page 8 – Connection to LPG; Use a pressure regulator and make the connection to the tank; Ventilation of rooms; Discharge of combustion products must be guaranteed by means of
  • Page 9 – ADAPTATION TO DIFFERENT TYPES OF GAS; appliance from the electrical socket.; natural gas; at a pressure of; Removing the hob; Remove the screws and the nuts
  • Page 10 – Regulation for LPG
  • Page 11 – Regulation for natural gas; Regulation for town gas
  • Page 12 – Regulation of primary air
  • Page 13 – FINAL OPERATIONS; Regulation of minimum for natural gas; Regulation for LPG”.
  • Page 14 – Arrangement of burners on hob; Burners; Lubrication of gas taps; This must be done by a qualified technician.
  • Page 15 – Instructions for the user; USING THE HOB; Ignition of the burners
  • Page 16 – Practical advice for using the burners; Take care not to touch the glass of the lid with hot pots and pans.; Diameter of the pans; Using a griddle plate
  • Page 17 – CLEANING AND MAINTENANCE; Never use a steam jet to clean the appliance.; Cleaning; Regular daily cleaning of the hob; pour the product on a damp cloth and wipe the surface,; Food stains or residues
  • Page 18 – Cleaning of cooking hob components; CAUTION: do not wash these components in a dishwasher.; Ignition plugs and safety devices; Check frequently and clean with a damp cloth when necessary.; The cover; and water drips might damage its operation and appearance.
Loading the manual

Contents

21


1

INSTRUCTIONS FOR SAFE AND PROPER USE ____________________ 22

2

POSITIONING OF THE HOB ____________________________________ 24

3

ELECTRICAL CONNECTION ____________________________________ 26

4

GAS CONNECTION ___________________________________________ 27

5

ADAPTATION TO DIFFERENT TYPES OF GAS _____________________ 29

6

FINAL OPERATIONS __________________________________________ 33

7

USING THE HOB______________________________________________ 35

8

CLEANING AND MAINTENANCE _________________________________ 37











THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES

WHOSE IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS
MANUAL.


INSTRUCTIONS FOR THE INSTALLER: these are for the

qualified

technician

who must carry out a suitable check of the gas system,

install the appliance, set it functioning and carry out an inspection test.

INSTRUCTIONS FOR THE USER: these contain user advice,

description of the commands and the correct procedures for cleaning

and maintenance of the appliance.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE

Introduction 22 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE...

Page 3 - DO NOT PUT; The manufacturer declines all responsibility

Introduction 23 THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASING MUST NOT BE REMOVED. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDE...

Page 4 - Instructions for the installer; POSITIONING OF THE HOB; must be carried out by a competent tradesman.; Attachment to support structure; on the inner side

Instructions for the installer 24 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as the...

Other Smeg Hobs Models