Smeg PGA95F3 - Manual
Smeg PGA95F3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instructions for the installer; INSTRUCTIONS FOR SAFE AND PROPER USE
- Page 4 – INSTALLATION OF THE APPLIANCE; be carried out by a competent tradesman.; Fixing the conventional built-in model to the structure
- Page 5 – Attachment to support structure, flush-mounting model; Apply a layer of “waterproof primer” to the milled surface.
- Page 6 – Caution: surface temperature underneath may exceed 125 degrees C.
- Page 7 – Clearance above and around domestic appliances
- Page 8 – 0 mm or more, or the horizontal surface shall be above the; Room ventilation
- Page 9 – Discharge of combustion products
- Page 10 – GAS CONNECTION; annealed copper pipe or
- Page 11 – Electrical connection; Do not use reducers, adapters or shunts.; The manufacturer will not be liable; for any damage to persons or
- Page 12 – ADAPTATION TO DIFFERENT TYPES OF GAS; Before performing any cleaning or maintenance work, detach the; Replacement of nozzles on the hob; unscrew the burner nozzles with a 7 mm socket wrench
- Page 13 – Burner and nozzle characteristics table; Auxiliary
- Page 14 – FINAL OPERATIONS; cooker has been tested, replace the plate inside the heating; Adjustment of minimum for natural gas
- Page 15 – Instructions for the user; USE OF THE COOKING HOB; Lighting the burners; in the flame caps correspond to the spark plugs and
- Page 16 – Practical advice for using the burners
- Page 17 – CLEANING AND MAINTENANCE; Cleaning stainless steel; Ordinary Daily Cleaning; Cleaning of cooking hob components
- Page 18 – Preventive maintenance; Gas connection: the gas connection must be checked periodically.; PROBLEMS AND CAUSES; PROBLEM
Contents
INSTRUCTIONS FOR SAFE AND PROPER USE ________________ 4
INSTALLATION OF THE APPLIANCE _________________________ 6
GAS CONNECTION ______________________________________ 12
ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 14
FINAL OPERATIONS _____________________________________ 16
USE OF THE COOKING HOB ______________________________ 17
CLEANING AND MAINTENANCE ___________________________ 19
PROBLEMS AND CAUSES ________________________________ 20
Thank you for choosing our product.
We advise you to read this manual carefully. It contains all necessary
instructions for maintaining unaltered the appearance and functional
qualities of the hob.
INSTRUCTIONS FOR THE INSTALLER: these are for the
authorised
persons
who must carry out a suitable check of the gas system, install
the appliance, set it functioning and carry out an inspection test.
INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instructions for the installer 4 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREI...
Instructions for the installer 6 2. INSTALLATION OF THE APPLIANCE The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long...
Instructions for the installer 7 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in the figure in the work surface, observing a minimum distance of 50 mm from the rear edge. The lower part of the protective cover must be fully accessible when the...
