SilverStone Stone STRIDER SX500 - User Manual
SilverStone Stone STRIDER SX500 Power Supply – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATION; SFX Form Factor; With Active PFC; Input Characteristics
- Page 3 – Output characteristics
- Page 9 – Mechanical Specification
- Page 10 – Definition einer Überlastung des Netzanschlusses
- Page 11 – Definizione di uso eccessivo del connettore di alimentazione
- Page 12 – 전원 공급 커넥터 과용 정의; KR
- Page 13 – 電力供給コネクタの使用限度超過に関する説明; JP; 电源供应器接头过度使用定义; CN
- Page 14 – 電源供應器接頭過度使用定義; TW; ขีดจํากัดการรองรับการใช้งานของขั้วต่อจากพาวเวอร์ซัพพลาย
SST-SX700-G SST-SX650-G SST-SX500-G
SFX Form Factor
The standard SFX power supply benchmark
Support standard SFX form factor
Silent running 92mm fan with 18 dBA minimum
All Japanese capacitors
High efficiency with 80 PLUS Gold certification
Class-leading single +12V rail
Strict ±3% voltage regulation and low ripple & noise
100% modular cables
All cables made with flexible flat arrays
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPECIFICATION SFX Form Factor SST-SX700-GSST-SX650-GSST-SX500-G 700W,650W, 500W Switching Power Supply With Active PFC 80Plus Gold 1.1 Scope 2.1 Input Voltage Nominal Voltage Voltage Variation Range 100-240 Vrms 90 - 264 Vrms This specification defines the performance characteristics of a single pha...
02 3.1 Normal Operation Output SX700-G +5V +3.3V +12V -12V +5Vsb Maximum continuous total DC output power should not exceed 700W. Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 110W. Maximum combined load on 12V outputs shall not exceed 700W. NOTE: Noise test should b...
08 The product shall meet requirement for EN61000-3-2 & EN61000-3-3 :2003 standard of class D, test at 230Vac 50Hz. 12. Harmonics The power supply with active power factor correction, and meet the EN61000-3-2 standards, The power factor is greater than 0.95 at 230V/50Hz, Max. load. A single PCIe...
