Shop Fox W1812 - User Manual

-5- W1812 Owner's Manual (Mfd. Since 02/11) SA FE T Y Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardou...

-8- W1812 Owner's Manual (Mfd. Since 02/11) EL EC TR IC A L ELECTRICAL Circuit.Requirements This machine must be connected to the correct size and type of power supply circuit, or fire or electrical damage may occur. Read through this section to determine if an adequate power supply circuit is avail...

-9- W1812 Owner's Manual (Mfd. Since 02/11) EL EC TR IC A L Grounding.Requirements This machine MUST be grounded. In the event of certain types of malfunctions or breakdowns, grounding provides a path of least resistance for electric current to travel—in order to reduce the risk of electric shock. I...

-10- W1812 Owner's Manual (Mfd. Since 02/11) SE TU P This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking SETUP The following is a description of the main co...

-13- W1812 Owner's Manual (Mfd. Since 02/11) SE TU P Assembly The Model W1812 Planer/Moulder is shipped with an off-the-shelf 48" Power Twist™ Link V-Belt. The planer/ moulder is designed for a 45" V-belt, so the included V-belt must be modified before installing it. To.remove.links,.do.the....

-18- W1812 Owner's Manual (Mfd. Since 02/11) O PE R ATIO NS Figure 20. Disabling the machine. Removing the key from the power switch disables the cutterhead ON button (see Figures 20.&.21 ) which can prevent unauthorized machine operation. If the machine is located where untrained people have ac...

-19- W1812 Owner's Manual (Mfd. Since 02/11) O PE R ATIONS Installing.Planing.Knives To.install.the.planing.knives,.do.these.steps: 1 . . DISCONNECT MACHINE FROM POWER! 2 . Pull the pin shown in Figure. 22, and remove the chip deflector. 3 . Put on heavy leather gloves, and use a 14mm wrench to remo...

-31- W1812 Owner's Manual (Mfd. Since 02/11) O PE R ATIONS ACCESSORIES The following planer/moulder accessories may be available through your local Woodstock International Inc. dealer. If you do not have a dealer in your area, these products are also available through online dealers. Please call or ...

-33- W1812 Owner's Manual (Mfd. Since 02/11) M A INTEN A N CE MAINTENANCE Regular maintenance on your machine will ensure its optimum performance. Make a habit of inspecting your machine each time you use it. • Loose mounting bolts. • Worn switch, damaged cords, and plugs. • Damaged V-belt. • Any ot...

-34- W1812 Owner's Manual (Mfd. Since 02/11) M A INTE N A N CE Lubrication Figures 51—53 show lubrication locations that need attention every six months; however, under heavy use or adverse working conditions, increase lubrication intervals accordingly. Since all bearings are sealed and permanently ...

-35- W1812 Owner's Manual (Mfd. Since 02/11) SE RV IC E SERVICE This section covers the most common service adjustments or procedures that may need to be made during the life of your machine. If you require additional machine service information not included in this section, please contact Woodstock...

-36- W1812 Owner's Manual (Mfd. Since 02/11) SE RV IC E The feed rollers must be aligned correctly with the table to maintain a smooth and straight feed. To.check.the.feed.roller-to-table.alignment,.do.these. steps: 1 . . DISCONNECT MACHINE FROM POWER! 2 . Pull the retaining pin out (see Figure. 57)...

-40- W1812 Owner's Manual (Mfd. Since 02/11) SE RV IC E Hot Hot Ground 6-15 Plug 230 VAC 230 VAC G RA-20 Thermal Overload AMP RA-20 RESET 98 1/2 T1/2 T3/6 8 3/4 T2/4 L1/1 L3/5 7 L2/3 5/6 Universal DC Brush-Style Feed Motor 180VDC Cutterhead Induction Motor 240 VAC Plug Plug Capacitor MA-09 Contactor...

-42- W1812 Owner's Manual (Mfd. Since 02/11) SE RV IC E Troubleshooting This section covers the most common problems and corrections with this type of machine. WARNING!.DO.NOT.make.any.adjustments.until.power.is.disconnected.and. moving.parts.have.come.to.a.complete.stop! PROBLEM POSSIBLE .CAUSE COR...

-45- W1812 Owner's Manual (Mfd. Since 02/11) PA RT S PARTS Headstock 20 21 23V2 8 25V2 23V2 25V2 26 28 87 88 57 56 40 47 39 39 37 46 33 34 42 63 13 2 93 93 71 70 69 17 41V2 36 36 36 36 92 30V2 31 32 7 38 35 33 34 37 40 43 16 11V2 1 4 5 9 61 62 61 62 18 10 3 8 19 14 95V2 44 45 90 29 59 60 7 10 6 65 1...

W1812 Owner's Manual (Mfd. Since 02/11) CUT ALONG DOTTED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ________________________...

WARRANTY Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neglige...