Shop Fox W1410 - Manual
Shop Fox W1410 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – SECTION I: INTRODUCTION
- Page 6 – SECTION II: INSTALLATION
- Page 11 – SECTION III: ADJUSTMENTS
- Page 19 – SECTION IV: OPERATIONS
- Page 21 – SECTION V: TROUBLESHOOTING
- Page 25 – SECTION VI: PART DOCUMENTATION
- Page 28 – SECTION VII: SPECIFICATIONS
- Page 29 – SECTION XIII: WARRANTY
COPYRIGHT © 1996 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
REVISED MAY, 1997 PRINTED IN USA
P.O. Box 2309
Bellingham, WA 98227
Shop Fox Fence
ITEM W1410
OPERATING MANUAL
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Shop Fox
- Model
- W1410
- Document type
- Manual
- Language(s)
- English
- Pages
- 29
- File size
- 2.3 MB
- Format
Summary
-1- I. INTRODUCTION ...................................................................................................................... 2 A. SAFETY RULES FOR ALL TOOLS ........................................................................................ 3B. UNPACKING .............................
-2- Shop Fox ® Fence SECTION I: INTRODUCTION Thank you for purchasing Woodstock International’s Shop Fox ® Fence. The Item W1410 Shop Fox ® Fence was designed by Woodstock’s engineering staff to provide the woodworker with a precision alternative to standard table saw fences. The Shop Fox ® Fence fi...
Shop Fox ® Fence -5- SECTION II: INSTALLATION Figure 1. Attaching the back rail. C. MOUNTING THE RAILS Step 1. Locate the back fence rail (the rail with the oval cut-outs) and set it against the rear edge of the table saw. Position the back rail so that its top edge is 1 ⁄ 16 " below the table t...
