Shindaiwa 80709 - Manual
Shindaiwa 80709 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Introduction
- Page 3 – Assembling the Spray Wand; Tightening; Adjusting the Shoulder Straps; After assembling the sprayer, fill the tank with clear water and
- Page 4 – Calibrating the Sprayer
- Page 5 – Optional Accessories; Par t Number; Application; AVAILABLE SPRAY NOZZLES
- Page 6 – Cleaning the Sprayer; Maintenance; Troubleshooting: Lack of Pressure; Pump Disassembly; CAUSE; Assembly
- Page 7 – Unidentified chemicals left in the sprayer tank can pose; Shindaiwa Limited Warranty
- Page 9 – Part Number ItemDescription
SHINDAIWA OWNER’S/OPERATOR’S MANUAL
SP300 BACK PACK SPRAYER
®
Par t Number 80709 Rev. 6/02
WARNING!
Minimize the risk of injury to yourself
and others! Read this manual and
familiarize yourself with the con-
tents. Always wear eye protection,
gloves and a respirator when operat-
ing this unit.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
This manual contains information for the proper assembly, operation and care of your SP300 backpack sprayer. Carefully read and follow the instructions contained in this manual before operating your sprayer. Specifications Unpack the following items shipped in your sprayer box: Wand Pump Lever ...
Push the wand into the trigger valve and secure with screw cap. Hand tighten to prevent leakage. CAUTION! Do not overtighten! Trigger Valve Wand Screw Cap Assembling the Spray Wand Adjustment Ring Buckle Tightening 1. Place the sprayer on your back with the straps loosened. 2. Hold the adjustment ri...
3. Attach the flow calibrator bottle to the wand: a. Remove the nozzle, cap and filter from the spray wand. b. Mount the flow calibrator cover to the spray wand. c. Reinstall the nozzle, filter and nozzle cap. d. Screw the flow calibrator bottle into the cover. 4. Using the flow calibrator bottle: a...
