Shindaiwa 75RS - Manual
Shindaiwa 75RS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Contents
- Page 4 – Assembly; Shindaiwa Limited Warranty; Warranty Period
- Page 5 – Parts; Optional Accessory
- Page 6 – Operation; Rotate the rate cam to the proper; Hold the handle so the top of the; Fasteners
- Page 7 – Maintenance; Lubrication
- Page 8 – Effective Pattern Width; Spreader Settings; Application Rate; pounds of material used per; Rate Setting Conversion
SHINDAIWA OWNER’S/
OPERATOR’S MANUAL
7 5 R S
7 5 R S
TM
75RS BROADCAST
SPREADER
Part Number 80045
Shindaiwa Inc.
P.O. Box 2810
Tualatin, Oregon 97062
Telephone 503 692-3070
FAX 503 692-6696
2001 Shindaiwa Inc.
Part Number 80045
Printed in U.S.A.
Shindaiwa is a registered trademark
of Shindaiwa, Inc.
www.shindaiwa.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Introduction ........................................ 1 Assembly ............................................. 2 Operation ............................................. 4 Settings ................................................ 6 Rate Conversion ................................. 7 Maintenance ......
3. Feed control knob/wire through the T-handle until the caution labeltouches the round hole.See Figure 3. DO NOT COMPRESS THESPRING AT THIS TIME . Feed the T-handle/control wireassembly through the squarehandle tube towards the locatordot. See Figure 4. Secure the T-handle to the tube with (2)1/4-2...
5. Remove the caution label, push the thumb release toward the centerand push the control knob andspring down until the knob latches.See Figure 5. Caution! Once the knob is latched, do notmove the thumb release until youhave completed step 8! 6. Slide the wire retaining clip onto the wire. Insert th...
