Sharp XV-Z200E - Manual

-4 1. Unplug the Projector from the wall outlet before cleaning. 2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the Projector manufacturer, as they may causehazards. 4. Do not use the Projector near water; for example, n...

Introduction -7 The power indicatorilluminates green. In this page, connection of the projector and the video equipment is explained as an examplefor the procedure from setup to projection. Refer to each page for details. Quick Guide Required equipments Video cable Projector Power cord 1. Place the ...

-8 Projector (Front and Top View) 30 58 58 POWER indicator 6 Exhaust ventilative hole LAMP indicator TEMPERATURE WARNING indicator 39 ADJUSTMENT buttons ( ƒ / ∂ / ß / © ) 39 UNDO button 38 MENU button 35 RESIZE button 31 INPUT button 24 Swivel Stand LOCK/UNLOCK lever 11 Remote control sensor Lens ca...

Introduction -11 Operating the Remote Control ■ The remote control can be used to control the projectorwithin the ranges shown in the illustration. N o t e • The signal from the remote control can be reflected off a screenfor easy operation. However, the effective distance of the signalmay differ du...

-12 Accessories Remote control Power cord (For U.K., Hong Kong and Singapore) 21 pin RCAconversion adaptor (Supplied for Europe only) Lens cap Video cable Two AA size batteries (For Australia and New Zealand) Projector Operation manual Screws for terminal cover (For Europe except U.K.) N o t e • Dep...

Connections and Setup Connections and Setup XV_Z200E_E_p13_24.p65 03.10.30, 13:13PM 13

-14 Connecting the Projector to Other Devices Before Connecting N o t e • Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn offthe devices to be connected. After making all connections, turn on the projector and then the otherdevices.When connecting a c...

Connections and Setup -15 Connecting to Video Equipment Connecting to VideoEquipment Using anS-video Cable (INPUT 3) Using an S-video cable, a VCR, DVD player orother video equipment can be connected toINPUT 3 input terminal. 1 Connect an S-video cable tothe projector. 2 Connect the S-video cable to...

Connections and Setup -17 Connecting toComponent VideoEquipment Using aComponent Cable(INPUT 1) Use a component cable when connecting com-ponent video equipment such as DVD playersand DTV decoders to INPUT 1 terminals. 1 Connect a component cable tothe projector. 2 Connect the above cable to thecomp...

Connections and Setup -21 To INPUT 2 terminal Notebook computer To RGB output terminal RGB cable(commercially available) DVI to 15-pin D-sub adaptor (sold separately) Connecting to a Computer Optionalaccessory DVI to 15-pin D-sub adaptorType: AN-A1DV (20 cm) Connecting to a ComputerUsing the DVI to ...

-22 Connecting to a com-puter with DIGITALRGB output Terminal(DIGITAL INPUT) 1 S l i d e t h e “ D I G I TA L I N P U TTYPE” switch on the back ter-minal board to “PC”. 2 Connect a DVI cable to the pro-jector. 3 Connect the above cable to thecomputer. • Secure the connectors by tightening thethumbsc...

Connections and Setup -23 Controlling theProjector Using anRS-232C Cable When the RS-232C terminal on the projectoris connected to a computer with an RS-232Ccable (null modem, cross type, commerciallyavailable), the computer can be used to con-trol the projector and check the status of theprojector....

-24 1 2 3 Setup Caution • Do not hold the lens when lifting, lower-ing or rotating the projector. • When lowering the projector, be careful notto get your fingers caught in the area be-tween the Swivel Stand and the projector. N o t e • When the height or direction of the pro-jector is adjusted, the...

Connections and Setup -25 Attaching the SwivelStand 1 Align the tabs on the front bot-tom of the projector ( 1 ). 2 While holding down the button( 2 ), place the projector onto the Swivel Stand ( 3 ) to attach. 3 P r e s s t h e p r o j e c t o r d o w nfirmly to attach it to the SwivelStand to make...

-26 Adjusting the Projection Distance Setup • Refer to pages 33 and 34 about the function of Keystone correction and placement of projector using the correction. • Decide the placement of the projector referring to the figures on the table and the diagram below according to the size of your screen a...

Connections and Setup -27 90 ° 90 ° 90 ° 90 ° Upper and Lower Lens Shift Position • This projector is equipped with a lens shift function that lets you adjust the projection height.• Adjust the projection height to match the setup configuration.• The screen can be moved maximum the length of one scr...

-28 Rear Projection ■ Place a translucent screen between the projector and the au-dience. ■ Use the projector ’s menu screen to reverse the projected im-age. (See page 56 for use of this func-tion.) N o t e • Optimal image quality can be achieved when the projector ispositioned perpendicular to the ...

Basic Operation Basic Operation XV_Z200E_E_p29_43.p65 03.10.30, 13:14PM 29

-30 Image Projection -30 Basic Procedure Connect the required external equipment tothe projector before operating the followingprocedures. Info • The language preset at the factory is English.If you want to change the on-screen displayto another language, reset the language ac-cording to the procedu...

-32 -32 Image Projection Turning the Power off 1 Press on the remote con- trol or on the projector, then press or again while the confirmation messageis displayed, to put the projec-tor into the standby mode. • A dimly-lit screen is displayed for a short time to reduce lamp damage. N o t e • If you ...

Basic Operation -33 Horizontal Keystone Correction Vertical Keystone Correction Keystone Correction This function can be used to adjust the Key-stone settings. N o t e • For details about using the menu screen,see pages 38 to 41 . 1 Press on the projector or on the remote control. 2 Press / to selec...

Adjustments and Settings Adjustments and Settings XV_Z200E_E_p29_43.p65 03.10.30, 13:14PM 37

Using the Menu Screen -38 The menu screens allow you to adjust the image and various projector settings.The menu can be operated to achieve two functions, adjustment and setting.(For adjusting the menu items, see pages 38 and 39. For setting the menu items, see pages40 and 41.) Menu screen (example)...

-42 Menu Bar Items Language ( ) English Deutsch Español Nederlands Français Italiano Svenska Português Front Ceiling Ⳮ Front Rear Ceiling Ⳮ Rear Picture ( ) Tint Ⳮ 30 ⳮ 30 Color Ⳮ 30 ⳮ 30 Sharp Ⳮ 30 ⳮ 30 Contrast Ⳮ 30 ⳮ 30 Bright Ⳮ 30 ⳮ 30 Red Ⳮ 30 ⳮ 30 Blue Ⳮ 30 ⳮ 30 Reset 5500k 6500k 8500k 9300k 1...

-44 You can adjust the projector’s picture to your preferences with the following picture set-tings. Adjusting the Picture Adjusting Image Prefer-ences N o t e • First select “Memory 1-5” or “MemoryOFF” when you want to save the “Picture”menu settings. See page 47 for details. Adjust the “Picture” m...

-47 Adjustments and Settings Picture SettingFunction This function stores all items set in “Picture”.Five settings can be stored separately in“Memory 1” to “Memory 5”. Each stored set-ting is reassigned to each input mode (INPUT1 to INPUT 4 and DIGITAL).E v e n w h e n t h e i n p u t m o d e o r s ...

-48 Adjusting the Computer and DVD/DTV Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering inportions of the screen. When Auto Sync is OFF When “Auto Sync” is “OFF”, interference suchas flickering or vertical stripes may occur ifdisplaying tilings or ve...

On-screen Display -50 Adjusting the Computer and DVD/DTV Images Auto Sync Adjustment Used to automatically adjust a computer im-age.Select whether the image is to be synchro-nized automatically when switching the sig-nal with “ON” or “OFF”. Select “Auto Sync” in the “Fine Sync”menu on the menu scree...

-51 Adjustments and Settings Using the “Options” Menu Remaining lamp life 100% 5% Approx. Approx. 4,000 hours 200 hours Approx. Approx. 3,000 hours 150 hours Lamp usage condition Operated exclusivelyin Eco mode ( ) Operated exclusivelyin Standard mode ( ) Checking the Lamp LifeStatus You can confirm...

-53 Adjustments and Settings Selecting aBackground Image This function allows you to select the imagedisplayed when no signal is being sent to theprojector. Select “Background” in the “Options”menu on the menu screen. ➝ For operating the menu screen, see pages 38 to 41. Setting the Eco Mode This fun...

-56 This projector is equipped with a reverse/invert image function that allows you to reverse orinvert the projected image for various applications. Setting the ProjectionMode Display the “PRJ Mode” menu and se-lect the desired projection mode. ➝ For operating the menu screen, see pages 38 to 41. N...

-58 Maintenance Indicators ■ The warning lights on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminatered, and the projector will enter the standby mode. After the projector has entered the standb...

Appendix -59 Regarding the Lamp Info • If the temperature warning indicator illuminates, and the projector enters the standby mode, follow the pos-sible solutions on the previous page and then wait until the projector has cooled down completely beforeplugging in the power cord and turning the power ...

-60 Lampunit BQC-XVZ200++1 Removing and Install-ing the Lamp Unit Caution • Be sure to remove the lamp unit by the handle. Do not touch the glass surface of the lampunit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, carefully follow the steps below. • Replace ...

Appendix -61 6 Insert the new lamp unit. • Press the lamp unit firmly into the lampunit compartment. Fasten the secur-ing screws. 7 Attach the lamp unit cover. • Slide the lamp unit cover in the direc-tion of the arrow. • Fasten the user service screw. Resetting the LampTimer Reset the lamp timer af...

-62 Cleaning the Ventilative Holes • T h i s p r o j e c t o r i s e q u i p p e d w i t h ventilative holes to ensure the opti-mal operating condition of the projec-tor. • Periodically clean the ventilative hole by vacuuming it off with a vacuumcleaner. • T h e v e n t i l a t i v e h o l e s s h o...

Appendix -63 Check • Projector power cord is not plugged into the wall outlet.• Selected input is wrong. (See page 31 .) • Cables incorrectly connected to back panel of the projector. (See pages 14 – 23 .) • “Contrast” and “Bright” adjustments are set to minimum position. (See page 44 .) • Picture a...

-64 Connecting Pin Assignments RS-232C Port: 9-pin D-sub male connector Pin No. Signal Name I/O Reference 1 Not connected 2 RD Receive Data Input Connected to internal circuit 3 SD Send Data Output Connected to internal circuit 4 Reserved Connected to internal circuit 5 SG Signal Ground Connected to...

Appendix -65 PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type,commercially available) to the projector. (See page 23 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table.Sign...

-66 Computer Compatibility Chart N o t e • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in“CRT only” mode. Details on how to change display mode...

Appendix -67 Specifications Product type Model Video system Display method DLP panel Lens Projection lamp Video input signal S-video input signal Component input signal (INPUT 1) Component input signal (INPUT 2) Horizontal resolution RGB input signal Pixel clock Vertical frequency Horizontal frequen...

-68 327 153.8 118 368 Front View Bottom View Side View Top View Side View Rear View Dimensions Units: mm XV_Z200E_E_p67_70.p65 03.10.30, 13:15PM 68

Appendix -69 Glossary Aspect Ratio Width and height ratio of an image. The normalaspect ratio of a computer and video image is 4:3.There are also wide images with an aspect ratioof 16:9 and 21:9. Auto Sync Optimizes projected computer images by auto-matically adjusting certain characteristics. Backg...

-70 Index A AC socket ............................................................. 14Adjusting the Picture ............................................ 44ADJUSTMENT buttons ........................................ 39Aspect ratio .......................................................... 35Automatic...

XV-Z200E Printed on 100% post-consumer recycled paper.Gedruckt auf 100% wiederverwertungs Papier.Imprimé sur 100% de papier recyclé.Utskrift på återvunnet papper av 100% återvunnet material.Impreso en 100% de papel reciclado de postconsumo.Stampato su carta riciclata al 100%.Gedrukt op 100% kringloo...