Schneider Electric 170 LNT 710 00 - Manual
Schneider Electric 170 LNT 710 00 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Figure 1 shows the layout of a typical adapter and I/O base.; Figure 1; Front View; Product Overview
- Page 4 – Function
- Page 5 – Specifications
- Page 6 – Table 3; Firmware; remaining non–faulted inputs normally.
- Page 7 – Status Indicators
- Page 8 – Connecting to the Network; Network Connector
- Page 9 – Setting the Network Node Address
- Page 10 – Do not install any adapter unless you have set; This example sets the address to 31.
- Page 11 – Table 7
170 LNT 710 00
DeviceNet Communication Adapter for
Modicon TSX Momentum
User Guide
870 USE 104 00
Version 2.0
May 2002
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Modicon TSX MomentumDeviceNet Communication Adapter170 LNT 710 00 This Communication Adapter can be connected to any TSX Momentum I/O baseto create a functional I/O module. It provides direct connection to the DeviceNetnetwork, enabling a programmable controller or other DeviceNet master device to...
DeviceNet Communication Adapter 2 1.1 Product Overview 1.1.1 Function This adapter is installed on any TSX Momentum I/O base to form a complete I/Omodule that communicates on a DeviceNet network. A programmable controlleror other DeviceNet master device on the network can then read from the inputter...
DeviceNet Communication Adapter 3 1.2 Specifications Table 1 General Specifications Description Specification ODVA compliance Complies with ODVA Specification Release 2.0 for group 2only slave supporting polled and strobed connections. Data rate Supports 125/250/500 Kbaud standard DeviceNet rates. N...
