Sanus NFCD - Manual
Sanus NFCD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1 - Attach Feet to NFCD Base; Insert a Machine Screw (; Diagram 1; the phillips screwdriver, screw Cam Pins (; Diagram 2
- Page 3 – ) into each of the four holes in the Center Support (; Diagram 3; ) line up with the small holes in the edge of the Center Support (; Diagram 4
- Page 4 – Step 5 - Attaching NFCD Top Panel; Tap a Plastic Dowel Pin (; Diagram 5; Gently fit the NFCD Base (; Diagram 6
- Page 5 – Step 7 - Installing Glass Shelves; Stand the NFCD Media Tower upright. Place the Shelf Pins (; Diagram 7; Attach the Sanus Name Plate (; Diagram 8; Sanus Systems
Assembly Instructions for Model: NFCD
Thank you for choosing a Sanus Systems Natural Media Tower. The Model
NFCD is designed to keep your collection clean and organized by storing up to
430 CDs or 230 DVDs, all in one convenient location.
If you do not understand these directions, please contact Sanus at 800.359.5520
or www.sanus.com. Check carefully to make sure that there are no missing or
defective parts. Our customer service representatives can quickly assist you
with assembly questions, and missing or damaged parts. Replacement parts
for products purchased through authorized dealers will be shipped directly to
you. Never use defective parts. Improper assembly may cause damage or
serious injury. Do not use this product for any purpose that is not explicitly
specified by Sanus Systems. Sanus Systems can not be liable for damage
or injury caused by incorrect assembly, or incorrect use. Please call Sanus
Systems before returning products to the point of purchase.
Required Tools:
Rubber mallet or hammer, screwdrivers, phillips & regular
Supplied Parts List: (Not to Scale)
NFCD Top - A
Qty. 1
Glass Shelves - F
Qty. 14
NFCD Base - B
Qty. 1
Center Support - D
Qty. 1
Side Panels - E
Qty. 2
NFCD Foot - C
Qty. 4
Sanus Name Plate - G
Qty. 1
Sanus Systems
2221 Hwy 36 West, Saint Paul, MN 55113 02.28.06 (100028)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Supplied Hardware: (Full Size) Step 1 - Attach Feet to NFCD Base Insert a Machine Screw ( K ) into each Foot ( C ); then using the regular screwdriver, attach the Feet to the NFCD Base ( B ). Diagram 1 Cam - H Qty. 4 Cam Pin - I Qty. 4 Plastic Dowel - J Qty. 4 Wood Screw - L Qty. 4 Machine Screw - K...
Step 3 - Insert Cam into Center Support. Place a Cam ( H ) into each of the four holes in the Center Support ( D ) NOTE: Each Cam has an arrow on it. Using a phillips screwdriver align each Cam so the arrow is pointing toward the small hole on the edge of the Center Support (See Detail - A). Diagram...
Step 5 - Attaching NFCD Top Panel Stand the unit up so that the notched bottom of each Side Panel is facing down and the smooth top edge is facing up. Tap a Plastic Dowel Pin ( J ) into the holes in the top edge of each Side Panel ( E ); then, align the holes of the NFCD Top ( A ) with the Dowel Pin...
