Sanus NFCD - Manuals

Sanus NFCD – Manual in PDF format online.

Manuals:

Manual Sanus NFCD

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - Step 1 - Attach Feet to NFCD Base; Insert a Machine Screw (; Diagram 1; the phillips screwdriver, screw Cam Pins (; Diagram 2

Supplied Hardware: (Full Size) Step 1 - Attach Feet to NFCD Base Insert a Machine Screw ( K ) into each Foot ( C ); then using the regular screwdriver, attach the Feet to the NFCD Base ( B ). Diagram 1 Cam - H Qty. 4 Cam Pin - I Qty. 4 Plastic Dowel - J Qty. 4 Wood Screw - L Qty. 4 Machine Screw - K...

Page 3 - ) into each of the four holes in the Center Support (; Diagram 3; ) line up with the small holes in the edge of the Center Support (; Diagram 4

Step 3 - Insert Cam into Center Support. Place a Cam ( H ) into each of the four holes in the Center Support ( D ) NOTE: Each Cam has an arrow on it. Using a phillips screwdriver align each Cam so the arrow is pointing toward the small hole on the edge of the Center Support (See Detail - A). Diagram...

Page 4 - Step 5 - Attaching NFCD Top Panel; Tap a Plastic Dowel Pin (; Diagram 5; Gently fit the NFCD Base (; Diagram 6

Step 5 - Attaching NFCD Top Panel Stand the unit up so that the notched bottom of each Side Panel is facing down and the smooth top edge is facing up. Tap a Plastic Dowel Pin ( J ) into the holes in the top edge of each Side Panel ( E ); then, align the holes of the NFCD Top ( A ) with the Dowel Pin...

Sanus Manuals