Sanus VMAA18 - Manual
Sanus VMAA18 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – : Attach Brackets to Monitor; OPT; OPT
- Page 5 – : Install Wall Plate
- Page 6 – : Attach Arm to Wall Plate
- Page 7 – : Install Cable Management
- Page 8 – : Adjust Monitor Position
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
US Customer Service: 1-800-359-5520 • [email protected] • www.sanus.com
©2008 Milestone AV Technologies
VMAA18
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety
of the installation, contact Sanus Customer Service. Sanus is not liable for injury or
damage caused by incorrect installation or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
WARNING
Thank you for choosing the Sanus VMAA18 wall mount. The Sanus VMAA18 wall mount is
designed to support a monitor sized up to 50 in. (127cm) and weighing up to 59 kg (130
lbs). The mount is adjustable; it will tilt +5° to -15°, swivel to ±90°, and roll ±6.°
This product is designed for use in wood stud walls only! The wall must be capable of
supporting up to five times the weight of the monitor and mount combined. If you
have any doubts about the ability of the wall to support the monitor, contact Sanus
Customer Service, or a qualified contractor.
CAUTION
(6901-100016 <04>)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6901-100016 <04> 1: Attach Brackets to Monitor For Monitors with a Curved Back or Obstruction For Monitors with a Flat Back 001427.epsFPM70-Flat and Curved Back Brackets 001427.epsFPM70-Flat and Curved Back Brackets [17], [18], [19], [20] [03] [11], [12], [13], [14] [28], [29] 4x 4x 001429.eps...
6901-100016 <04> 001439.epsAttach Plate to Wall 4: Install Wall Plate [06] 001439.epsAttach Plate to Wall 001439.epsAttach Plate to Wall [01] Do not overtighten the lag bolts [15]. Tighten only until the washer [06] is pulled firmly against the wall plate [01]. Periodic maintenance may be requ...
6901-100016 <04> 5: Attach Arm to Wall Plate [32] Avoid potential injuries or property damage! Ensure the safety bolts [08] are secure. Periodic maintenance may be required. CAUTION [08] HEAVY! You will need assistance with this step. [02] [01]
