Sanus EFAV-II - Manual
Sanus EFAV-II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1 - Attach Floor Glides to Metal Frame; Thread the fi ve Floor Glides (; Diagram 1; Thread a Shelf Connector (; Diagram 2
- Page 3 – Step 3 - Place a Video Shelf on the Metal Base; Align four holes in a Video Shelf (; Diagram 3; Attach the Angled Center support (; Diagram 4
- Page 4 – Place the Video Shelf (; Diagram 6
- Page 5 – Sanus Systems; Step 7 - Install Wire Bushings; Snap the four Wire Bushings (; Diagram 7
Assembly Instructions for Model: EFAV-II
Thank you for choosing the Sanus Systems Model EFAV-II. Every effort has
been made to ensure that your Sanus Systems furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
800-359-5520 or at www.sanus.com. We can quickly help with any issues
regarding assembly or missing parts. Replacement parts for Sanus systems
products purchased through authorized dealers will be shipped directly to you.
Supplied Parts List: (
All threaded fasteners are shown full scale
)
Sanus Systems
2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Allen Key - K
Qty. 1
Floor Glide - I
Qty. 5
Pan head Bolt - G
Qty. 5
Shelf Connector - H
Qty. 5
Angled Center Support - C
Qty. 1
3” Cope Tube - B
Qty. 4
8” Pillar - A
Qty. 5
Video Shelf - E
Qty. 2
Metal Base - D
Qty. 1
Top Bolt - F
Qty. 5
Wire Bushing - J
Qty. 4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step 1 - Attach Floor Glides to Metal Frame Thread the fi ve Floor Glides ( I ) into the Metal Base ( D ). Diagram 1 I D I I I I Step 2 - Attach 3” Cope Tubes to Metal Base Thread a Shelf Connector ( H ) securely into the four 3” Cope Tubes ( B ). NOTE: Do not tighten the Pan Head Bolts (G) until th...
Step 3 - Place a Video Shelf on the Metal Base Align four holes in a Video Shelf ( E ) with the Shelf Connectors ( H ) threaded into the 3” Cope Tubes ( B ) in Step 2; then, place the Video Shelf onto the 3” Cope Tubes. Diagram 3 H H E B B Step 4 - Secure the Angled Center Support to the Video Shelf...
Step 5 - Attach 8” Pillars By hand, fi rmly thread an 8” Pillar ( A ) to the four Shelf Connectors ( H ) protruding through the Video Shelf (E). Diagram 5 Step 6 - Secure Video Shelf to 8” Pillars Place the Video Shelf ( E ) on the 8” Pillars ( A ); then, using the Allen Key ( K ) and fi ve Top Bolt...
