Sanus WMS2 - Manual
Sanus WMS2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – : attach Plate to Wall
- Page 5 – : Install Foot and Extension
- Page 6 – : Install Foam Strips and Cap
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • 651-484-7988
[email protected] • www.sanus.com
©2008 Milestone AV Technologies
WMS2
(6901-100149 <01>)
Thank you for choosing the Sanus WMS2 speaker mount. The Sanus WMS2 speaker mount is designed to support a
speaker sized up to 30 cm (12 in.) deep and weighing up to 6.5 kg (15 lbs).
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper assembly may cause
property damage or personal injury. If you do not understand these directions, or have doubts about the safety
of the assembly, contact Customer Service or call a qualified contractor. Sanus Systems is not responsible for
damage or injury caused by incorrect assembly or use.
CauTION
OPT
OPT
Hardware and procedures for multiple mounting configurations are included. When you see this symbol,
choose the correct configuration to suit your needs. Not all hardware included will be used.
IMPORTaNT SaFETY INSTRuCTIONS - SaVE THESE INSTRuCTIONS
001556.eps
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
WaRNING
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to five times
the weight of the speaker and mount combined. If you have any doubts about the ability of the wall to support
the speaker, contact Sanus Customer Service, or a qualified contractor.
CauTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6901-100149 <01> 001550.eps 1: attach Plate to Wall 3/16 in. [01] Do not overtighten the lag bolts [09]. Tighten only until the plate [01] is pulled firmly against the wall. NOTE [09] 001550.eps 001550.eps 001550.eps 60 mm (2.375 in.) < 16 mm (5/8 in.)
6901-100149 <01> 4: Install Cover 001553.eps [02] 5: Install Foot and Extension [16] 001554.eps [07] [04] [13] [14] 2x 2x
6901-100149 <01> Milestone AV Technologies, Inc. and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations...
